Sarrera
Thank you for choosing the Satco S12535 ST19 LED Light Bulb. This manual provides essential information for the safe and efficient use of your new LED bulb. Please read these instructions carefully before installation and retain them for future reference.
Image: The Satco S12535 ST19 LED Light Bulb, clear glass with visible filaments.
Segurtasun informazio garrantzitsua
- Deskarga elektrikoaren arriskua: Always disconnect power before installing or replacing the bulb.
- Barruan/Kanpoan erabilera: This bulb is rated for wet locations (IP65) and suitable for enclosed fixtures. It can be used indoors or in covered outdoor environments.
- liburukiatage: Ziurtatu fixture voltage is 120V. Do not use with incompatible voltage.
- dimming: This bulb is dimmable. Use only with compatible 120V dimmers. Incompatible dimmers may cause flickering or damage.
- Tenperatura: Do not operate outside the specified temperature range of -20°C to +45°C.
- Manipulazioa: Allow the bulb to cool before handling. Avoid touching the bulb with bare hands immediately after use.
- Xedapena: Dispose of LED bulbs according to local regulations.
Konfigurazioa eta Instalazioa
- Itzali: Before installation, ensure the power supply to the fixture is turned off at the circuit breaker or fuse box.
- Kendu bonbilla zaharra: Kontu handiz askatu dagoen bonbilla euskarritik.
- Txertatu bonbilla berria: Screw the Satco S12535 LED bulb into the E26 medium base socket. Ensure it is securely tightened but do not overtighten.
- Piztu: Berrezarri argindarra.
- Dimmer Compatibility (if applicable): If using a dimmer, ensure it is compatible with LED bulbs and rated for 120V.
Image: Close-up of the E26 medium base of the Satco LED bulb, indicating its standard screw-in design.
Funtzionamendua
The Satco S12535 LED bulb is designed for immediate illumination upon power activation. It provides 425 lumens of 5000K natural white light, suitable for various applications.
- Distira kontrola: When connected to a compatible 120V dimmer, the brightness can be adjusted from full intensity to a lower, softer glow.
- Argiaren kalitatea: The bulb features a high Color Rendering Index (CRI) of 92, ensuring accurate and natural color representation of objects in its light.
- Habearen hedapena: A 300-degree beam spread provides wide and even illumination, minimizing shadows.
Image: The Satco ST19 LED bulb installed in a fixture, providing illumination to a modern living room and kitchen area.
Mantentzea
The Satco S12535 LED bulb requires minimal maintenance due to its long rated life of 15,000 hours.
- Garbiketa: Bonbilla garbitzeko, ziurtatu korrontea itzalita dagoela eta bonbilla hoztuta dagoela. Garbitu astiro zapi leun eta lehor batekin. Ez erabili garbitzaile likidorik edo material urratzailerik.
- Ordezkoa: Replace the bulb when it reaches the end of its operational life. Follow the installation steps in reverse to remove the old bulb.
Arazoak konpontzea
If you encounter issues with your Satco S12535 LED bulb, refer to the following common troubleshooting steps:
- Bonbilla ez da pizten:
- Ziurtatu gailuaren energia-iturria piztuta dagoela.
- Egiaztatu bonbilla ondo torlojututa dagoen.
- Bonbilla beste lanpara batean probatu, akastuna ez dagoela baieztatzeko.
- Verify the fixture itself is operational.
- Argi keinukaria edo koherente ez dena:
- If using a dimmer, ensure it is compatible with LED bulbs. Older incandescent-only dimmers may cause flickering.
- Check for loose connections in the fixture or bulb socket.
- Ziurtatu liburukiatage supply is stable at 120V.
- Bulb is Too Dim or Too Bright:
- If using a dimmer, adjust the dimmer setting.
- Confirm the bulb's specifications (425 lumens, 5000K) match your lighting requirements.
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Modelo zenbakia | S12535 |
| Wattage | 5 watt (40W goritasun baliokidea) |
| Distira | 425 lumen |
| Kolore Tenperatura | 5000K (Zuri Naturala) |
| Bonbilla Forma | ST19 |
| Oinarri Mota | E26 Oinarri Ertaina |
| Kolore errendatze indizea (CRI) | 92 |
| Beam Angelua | 300 gradu |
| liburukiatage | 120V |
| Erregulagarria | Yes (with compatible 120V dimmers) |
| Bizitza baloratua | 15,000 ordu |
| Ingurumenaren Balorazioa | Wet Location Rated (IP65), Enclosed Fixture Rated |
| Funtzionamendu-tenperatura | -20°C eta +45°C artean |
| Ziurtagiriak | cULus, FCC, RoHS |
| Potentzia-faktorea | 0.7 |
| Maiztasuna | 60Hz |
| Item Weight (6-pack) | 1.06 kilo |
Image: Lighting Facts label detailing brightness, estimated yearly energy cost, life, light appearance (5000K), and energy used (5 watts).
Bermea eta Laguntza
The Satco S12535 ST19 LED Light Bulb is backed by a 2 urteko fabrikatzailearen bermea erosketa-datatik aurrera.
For warranty claims, technical assistance, or product support, please contact Satco customer service directly. Refer to the product packaging or the official Satco webuneko harremanetarako informazioa lortzeko gunea.
Webgunea: www.satco.com