fishkeeper Automatic Fish Feeder (Model FK092-NEW) User Manual

Sarrera

This manual provides detailed instructions for the safe and efficient use of your fishkeeper Automatic Fish Feeder, Model FK092-NEW. Please read this manual thoroughly before operating the device to ensure proper function and longevity.

Paketearen edukia

Egiaztatu behean zerrendatutako elementu guztiak zure paketean sartuta daudela:

• 1 x fishkeeper Automatic Fish Feeder (Model FK092-NEW)
• 1 x Desiccant Container
• 1 x Feed Outlet Chute
• 2 x Foot Supports
• 1 x 6.56ft/2m Power Cord (6V 1A)
• 3 x Feeding Reduction Clips
• 2 x Iltze
• 1 x Erabiltzailearen eskuliburua

Konfigurazioa

1. Power Aukerak

The fishkeeper Automatic Fish Feeder offers two power supply options:

• AC potentzia: Use the included 6.56ft/2m power cord for direct connection to an AC outlet.
• Bateria Potentzia: For cordless operation, install 4 AAA batteries (not included). This provides approximately 1-6 months of battery life.

2. Instalazio aukerak

Elikagailuak bi instalazio metodo eskaintzen ditu:

1. Secure to the Pond:
   • Install the foot supports outwards on the base of the feeder.
   • Secure the foot supports with the provided nails to a hard surface next to your pond (e.g., solid ground, wooden flooring, or tile).
2. Placed on the Aquarium Cover:
   • Install the feed outlet chute onto the feeder.
   • Place the feeder directly on top of your indoor aquarium cover, ensuring the feed chute is positioned over the water.

3. Elikagailua betetzea

The feeder has a 2.8L capacity. To fill:

1. Ireki elikagailuaren goiko estalkia.
2. Pour the desired fish food into the container. Ensure the food type is suitable (small pellet, large pellet, strip, corn & nuts).
3. Close the lid securely. The lid features a locking mechanism to prevent accidental spillage and a dedicated desiccant slot to keep food dry (desiccant not included).

Funtzionamendu-argibideak

1. LCD Display Overview

The feeder features an LCD display and control buttons for programming. Familiarize yourself with the display elements:

• JARRAIBIDEAK: Button to switch between modes.
• SET: Button to confirm settings.
• +: Button to increase values or cycle through options.
• -: Button to decrease values or cycle through options.
• Orain: Indicates current time setting.
• Vol (Feeding Volume): Indicates the number of times the feeder dispenses food per feeding session (1-99 portions).
• Denboraldia: Indicates specific feeding times (up to 6 meals per day in Custom Mode).
• Int (Precise Mode Feeding Interval): Sets the feeding interval (e.g., "0" for daily, "1" for every other day).

2. Current Time Calibration

To set the current time on your feeder:

1. Sakatu MODUA button to display the "Now" part.
2. Eduki sakatuta EZARTU botoia 3 segundoz.
3. Erabili + or - ordua doitzeko botoiak.
4. Sakatu EZARTU again to switch to minutes.
5. Erabili + or - minutuak doitzeko botoiak.
6. Sakatu EZARTU again to finish setting the time.

3. Setting Up Lazy Mode (Preset Timer)

Lazy Mode offers 9 preset feeding schedules for convenience:

To activate Lazy Mode:

1. Eduki sakatuta MODUA, EZARTU, eta + buttons simultaneously for 3 seconds to access the preset feeding schedules.
2. Sakatu + button to cycle through and select your desired feeding schedule.
3. Sakatu EZARTU to confirm the schedule. The display will automatically jump to "Vol" setting.
4. Erabili + eta - buttons to adjust the portion size (number of dispenses, 1-99).
5. Sakatu EZARTU to confirm the portion setting. A small "h" icon will appear in the lower-right corner of the time display, indicating Lazy Mode is active.

4. Setting Up Custom Timed Mode (Precise Mode)

Custom Mode allows you to set up to 6 specific feeding times per day:

1. First, reset to factory settings by pressing and holding EZARTU eta - botoiak 3 segundoz.
2. Sakatu MODUA button twice to access the "Timing" settings.
3. Eduki sakatuta EZARTU button for 3 seconds to start setting the first meal time.
4. Erabili + or - buttons to set the hour, then press EZARTU to switch to minutes. Repeat for minutes.
5. Sakatu EZARTU again to set the second meal time, and continue this process for subsequent meals (up to 6).
6. To exit without setting additional times, press the MODUA button. This will automatically jump to the "Int" setting page.
7. Luze sakatu EZARTU for 3 seconds to enter "Int" settings. Use + or - to adjust the feeding interval (0 for daily, 1 for every other day, etc.). Press EZARTU baieztatzeko.
8. Finally, for "Vol" (Feeding Volume) setting: Press the MODUA button until "Vol." appears. Then press and hold EZARTU for 3 seconds to enter "Vol." settings. Use + or - to adjust the portion (number of dispenses, 1-99) and press EZARTU ezarpena berresteko.

5. Adjusting Food Portion Size (Using Reduction Clips)

The feeder includes 3 reduction clips to control the dispensed food portion, suitable for fish pellet sizes 2-10mm. These clips can be disassembled to achieve a larger discharge aperture if needed.

6. Removing the Reduction Clip

To remove a reduction clip for larger portions or cleaning:

1. Eduki sakatuta - button for 3 seconds. The display will show "OPEN".
2. Gently shake the feeder to help release the clip.
3. Use your finger to remove the clip from the feed outlet.

Oharra:

• It is recommended to adjust the "Vol" setting to achieve the desired feeding portion.
• It is recommended to remove the clip only when using large-sized pellets.

Mantentzea

Regular maintenance ensures optimal performance and longevity of your fishkeeper Automatic Fish Feeder.

1. Preventing Moisture and Clumping

• The feeder features a waterproof snap-on lid and a rain-proof feed outlet chute design to protect food from moisture.
• Utilize the dedicated desiccant slot on the lid to insert a desiccant packet (not included) to further keep food dry and fresh.
• The internal rotatable rotor helps prevent food from clumping or getting stuck during dispensing.

2. Garbiketa

To clean the feeder:

• Ensure the feeder is powered off and disconnected from any power source.
• Remove any remaining food from the hopper.
• Disassemble the feed outlet chute and any reduction clips for thorough cleaning.
• Wipe down the interior and exterior of the feeder with a damp cloth. Avoid submerging the main unit in water.
• Clean the feed outlet chute and reduction clips with mild soap and water, then rinse thoroughly and allow to air dry completely before reassembling.
• Ensure all parts are completely dry before refilling with food and resuming operation.

Arazoak konpontzea

If you encounter issues with your fishkeeper Automatic Fish Feeder, refer to the following common problems and solutions:

Zehaztapenak

Bermea eta Laguntza

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official fishkeeper webgunea. Gorde erosketa-agiria berme-erreklamazioetarako.