TILSWALL Cordless Hot Glue Gun User Manual

1. Sarrera

Thank you for choosing the TILSWALL Cordless Hot Glue Gun. This device is designed for various crafting, DIY, and repair tasks, offering portability and ease of use. It features a rapid preheating system, intelligent power-off protection, and a stable design. This manual provides essential information for safe and effective operation.

This image displays the Tilswall Cordless Hot Glue Gun along with a supply of hot glue sticks, illustrating the complete product package.

2. Segurtasun-argibideak

WARNING: Hot glue guns operate at high temperatures. Improper use can cause burns or other injuries. Read all safety instructions before use.

• Always keep the glue gun away from children. Adult supervision is required when children are present.
• Do not touch the nozzle or the melted glue directly. The nozzle and glue can reach temperatures sufficient to cause severe burns.
• Erabili kola-pistola ondo aireztatutako leku batean.
• Never leave the hot glue gun unattended when it is powered on. The intelligent power-off feature activates after 5 minutes of inactivity, but manual power-off is recommended when not in use.
• Do not use the glue gun near flammable materials.
• Ensure the glue gun is placed on a stable, heat-resistant surface when not in hand. The spacious base is designed for stability.
• Only use glue sticks of the specified diameter (7mm) to prevent damage to the gun.
• If the glue gun is dropped or damaged, inspect it for any issues before further use.

This image highlights the safety features of the nozzle, including a silicone protective cover designed to prevent accidental burns and an anti-drip mechanism to minimize excess glue leakage during use.

3. Produktuaren osagaiak

Familiarize yourself with the parts of your TILSWALL Cordless Hot Glue Gun:

This diagram illustrates the main components of the hot glue gun, including the nozzle, protective silicone cap, trigger for glue dispensing, power indicator light, on/off switch, USB-C charging port, and the inlet for glue sticks. The dimensions are also indicated.

1. Tobera: Dispenses melted glue. Features an anti-drip design.
2. Silicone Cap: Protective cover over the nozzle to prevent scalding.
3. Trigger: Kola elikatzeko mekanismoa aktibatzen du.
4. Argi adierazlea: Energiaren eta berogailuaren egoera erakusten du.
5. Aldatu: On/Off button for the device.
6. Kargatzeko ataka: USB-C input for charging the internal battery.
7. USB kargatzeko kablea: Included for recharging.
8. Glue Inlet: Where glue sticks are inserted.
9. Kola makila: Solid adhesive material, 7mm diameter.

4. Konfigurazioa

4.1 Bateria kargatzea

Before first use, fully charge the glue gun. Connect the provided USB charging cable to the USB-C charging port on the glue gun and to a compatible USB power adapter (not included). The indicator light will show charging status.

The glue gun is equipped with a 2000mAh rechargeable battery, providing approximately 60 minutes of continuous operation on a full charge. This ensures portability and extended use without a power cord.

4.2 Inserting Glue Sticks

Insert a 7mm diameter hot glue stick into the glue inlet at the rear of the gun. Push it gently until it stops. Do not force the stick.

The included glue sticks are designed for high purity, offering excellent clarity, high viscosity for strong adhesion, and are odor-free. They measure 7mm in diameter and 110mm in length.

5. Funtzionamendu-argibideak

5.1 Powering On and Preheating

1. Press the On/Off switch to power on the glue gun. The indicator light will illuminate.
2. Allow the glue gun to preheat for approximately 30 seconds. In colder environments, this may take up to 60 seconds. The indicator light will change or stabilize once the operating temperature is reached.

The image demonstrates the rapid preheating capability of the glue gun, reaching operational temperature in approximately 30 seconds. This allows for quick initiation of crafting or repair projects.

5.2 Applying Glue

1. Once preheated, gently press the trigger to dispense melted glue from the nozzle.
2. Apply glue to the desired surface. For best adhesion, apply glue to one surface and press the two surfaces together within 15-30 seconds, before the glue cools and hardens.
3. If the glue stick runs short, insert a new one into the inlet and push it forward to continue dispensing.

The compact and ergonomic design of the glue gun makes it comfortable to hold and easy to maneuver for various crafting and repair tasks.

5.3 Itzali automatikoa

The glue gun is equipped with an intelligent power-off protection feature. If left idle for more than 5 minutes, the device will automatically power off to enhance safety, prevent overheating, and conserve battery life. To resume operation, simply press the On/Off switch again.

The glue gun features a wide and stable base, designed to prevent tipping during use or when placed on a work surface. This enhances safety and ease of handling.

6. Mantentzea

• Garbiketa: Ensure the glue gun is completely cool before cleaning. Gently wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Toberaren zainketa: Do not attempt to clean the nozzle while the gun is hot. Any dried glue around the nozzle can be carefully removed once the gun is cold.
• Biltegiratzea: Store the glue gun in a dry, cool place, away from direct sunlight and out of reach of children. Ensure no glue stick is left partially melted in the gun during long-term storage.

7. Arazoak

• Glue not dispensing: Ensure the glue gun is fully preheated. Check if a glue stick is properly inserted and if the trigger is being pressed firmly.
• Glue gun not heating: Verify that the battery is charged and the power switch is in the 'On' position. If the battery is low, recharge the device.
• Excessive dripping: A small amount of dripping is normal for hot glue guns. Ensure the gun is fully preheated before use, as insufficient heat can cause more dripping. The anti-drip nozzle design minimizes this.
• Adierazle argiak ez du funtzionatzen: Check if the glue gun is powered on and charged. If issues persist, contact customer support.

8. Zehaztapenak

9. Bermea eta Laguntza

TILSWALL products are manufactured to high-quality standards. For warranty information or technical support, please refer to the product packaging or contact TILSWALL customer service through their official website or the retailer where the product was purchased. Please have your model number (B0G41Q6HTL) and purchase date available when contacting support.