1. Sarrera
The Thermalright Peerless Assassin 120 Vision MAX ARGB CPU Cooler is a high-performance dual-tower air cooler designed for efficient heat dissipation in modern computing systems. It features a 5-inch LCD screen for customizable display options and two TL-K12 120mm PWM ARGB fans. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your cooler.
2. Segurtasun informazioa
- Deskonektatu beti ordenagailuaren korrontea CPU hozkailua instalatu edo mantentze-lanak egin aurretik.
- Handle components with care to avoid damage. Sharp edges may be present on heatsink fins.
- Mantendu haurren eskura.
- Ensure proper grounding to prevent electrostatic discharge (ESD) damage to sensitive components.
- Do not modify the product. Unauthorized modifications may void your warranty and pose safety risks.
3. Paketearen edukia
Egiaztatu osagai guztiak paketean daudela:
- 1 x Thermalright Peerless Assassin 120 Vision MAX ARGB CPU cooler (heatsink with LCD top cover)
- 2 x TL-K12 120 mm PWM ARGB fans
- 1 x Mounting kit for Intel and AMD platforms
- 1 x User manual / installation guide (this document)
4. Konfigurazioa eta instalazioa
4.1 Instalazioaren aurreko egiaztapenak
- Kasuen bateragarritasuna: Ensure your PC case supports a CPU cooler height of at least 164 mm.
- Plaka basearen goiburuak: Confirm your motherboard has a free 4-pin CPU fan header, a 3-pin 5V ARGB header, and a 9-pin USB 2.0 header available.
- Pasta termikoa: The included thermal grease (TF7) is suitable for effective application.
4.2 Instalazio Urrats Orokorrak
- Prepare your motherboard by removing any existing CPU cooler and cleaning the CPU surface thoroughly.
- Identify the correct mounting hardware for your CPU socket (Intel LGA115X/1200/1700/1851 or AMD AM4/AM5). Refer to the detailed mounting kit diagram below.
- Install the backplate (if required for your socket) and standoffs onto the motherboard.
- Apply a small amount of thermal paste to the center of the CPU's integrated heat spreader (IHS).
- Carefully place the heatsink onto the CPU, ensuring even contact.
- Secure the heatsink with the appropriate mounting brackets and screws, tightening them in an alternating pattern to ensure even pressure.
- Attach the two TL-K12 fans to the heatsink using the provided clips. Ensure the airflow direction is correct (typically blowing towards the rear of the case).
- Connect the 4-pin PWM fan connectors to the CPU_FAN headers on your motherboard. If using a Y-splitter, note that some motherboards may not detect individual fan speeds.
- Connect the 3-pin 5V ARGB connectors to the ARGB headers on your motherboard.
- Connect the LCD display's 9-pin USB 2.0 header cable to an available USB 2.0 header on your motherboard.
- Route all cables to avoid contact with fan blades and other moving parts inside the case.
Figure 1: Mounting Kit Components for Intel and AMD Platforms. This image shows the various brackets, screws, and pillars required for installing the cooler on different CPU sockets, including Intel LGA1851, 1700, 115X, 1200, and AMD AM4, AM5.
Figure 2: Cooler Compatibility and Clearance. This diagram illustrates how the cooler fits within a standard ATX chassis, emphasizing clearance for RAM modules, the overall 164mm height, and avoiding interference with the graphics card.
5. Funtzionamendu-argibideak
5.1 Piztea eta hasierako abiaraztea
After successful installation, power on your computer. The fans should begin spinning, and the ARGB lighting should illuminate. The LCD screen will typically display a default animation or system information upon boot.
5.2 LCD Screen Functionality
The 5-inch LCD screen (480 x 854 resolution) on the top cover supports displaying system themes, logos, videos, and animated images. To customize the display, you will need to install the dedicated Thermalright software (usually available for download from the official Thermalright website). This software allows you to:
- Upload custom images and GIFs.
- Display real-time system information (CPU temperature, usage, etc.).
- Adjust screen brightness and orientation.
Figure 3: Customizable LCD Display. This image shows the 5-inch IPS LCD screen integrated into the cooler, capable of displaying personalized images, animations, and system data with high quality.
5.3 Haizagailuaren kontrola (PWM)
The TL-K12 fans are PWM (Pulse Width Modulation) controlled. Their speed will automatically adjust based on CPU temperature, as managed by your motherboard's BIOS/UEFI settings or dedicated fan control software. You can typically configure fan curves in your motherboard's BIOS to optimize for noise or cooling performance.
5.4 ARGB Argiztapen Kontrola
The ARGB lighting of the fans is controlled via the 3-pin 5V ARGB header connected to your motherboard. You can synchronize the lighting with other ARGB components in your system using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync).
6. Mantentzea
6.1 Cleaning the Heatsink and Fans
Regular cleaning helps maintain optimal cooling performance. It is recommended to clean the cooler every 6-12 months, or more frequently in dusty environments.
- Disconnect power from your computer.
- Carefully remove the fans from the heatsink.
- Use compressed air to blow dust out of the heatsink fins. Hold the can upright to prevent propellant discharge.
- Wipe fan blades and frames with a soft, dry cloth. Avoid using liquid cleaners directly on electronic components.
- Reattach the fans securely.
6.2 Thermal Paste Reapplication
Over time, thermal paste can dry out, reducing its effectiveness. If you notice a significant increase in CPU temperatures, consider reapplying thermal paste. This involves removing the heatsink, cleaning off old thermal paste from both the CPU and cooler base, and applying a fresh layer.
Figure 4: Magnetic Top Cover for Easy Access. This image highlights the magnetic design of the cooler's top cover, allowing for quick disassembly and assembly for maintenance or customization.
Figure 5: Precision Reflow Soldering Copper Base. A close-up view of the nickel-plated C1100 pure copper base and six 6mm heat pipes, demonstrating the micro-carved design and reflow soldering for efficient heat transfer.
7. Arazoak
7.1 Fans Not Spinning
- Egiaztatu konexioak: Ensure the 4-pin PWM fan cables are securely connected to the motherboard's CPU_FAN headers.
- BIOS ezarpenak: Verify that fan control settings in your motherboard's BIOS are configured correctly and not set to 'off' or a very low RPM at idle temperatures.
- Elikatze-iturria: Ensure your power supply is providing adequate power to the motherboard and components.
7.2 LCD Screen Not Displaying
- Egiaztatu USB konexioa: Ensure the 9-pin USB 2.0 header cable from the LCD is firmly connected to an available USB 2.0 header on your motherboard.
- Softwarearen instalazioa: Install the Thermalright LCD control software from the official webgunea.
- Gidariaren arazoak: Check Device Manager for any unrecognized USB devices or driver conflicts.
7.3 Poor Cooling Performance / High CPU Temperatures
- Pasta termikoaren aplikazioa: Ensure thermal paste was applied correctly and evenly. Reapply if necessary.
- Heatsink Contact: Verify that the heatsink base makes firm, even contact with the CPU's IHS. Check for any obstructions or uneven mounting pressure.
- Haizagailuaren orientazioa: Confirm that the fans are oriented correctly to pull air through the heatsink and exhaust it from the case.
- Kasuaren aire-fluxua: Ensure adequate airflow within your PC case. Poor case ventilation can hinder cooler performance.
- Hauts-pilaketa: Clean the heatsink and fans as described in the Maintenance section.
7.4 ARGB Lighting Not Working
- Egiaztatu ARGB konexioa: Ensure the 3-pin 5V ARGB cables are securely connected to the motherboard's ARGB headers.
- Plaka basearen softwarea: Use your motherboard's RGB control software to manage and troubleshoot ARGB lighting.
- Bateragarritasuna: Verify that your motherboard's ARGB header is 5V (3-pin) and not 12V (4-pin), as connecting to the wrong header can cause damage.
8. Zehaztapenak
Figure 6: Product Dimensions and Fan Parameters. This image provides a visual representation of the cooler's overall dimensions and detailed specifications for the TL-K12 fans.
8.1 Beroa
- Neurriak: 125 (L) x 110 (W) x 164 (H) mm
- Bero-hodiak: 6 x 6 mm
- Kobrezko oinarria: C1100 pure copper, nickel plated
- Pantailaren tamaina: 5 hazbetekoa
- Pantailaren bereizmena: 480 x 854
- LCD Display Connector: Motherboard 9-pin USB 2.0 header
- Materiala: Aluminum (fins), Copper (base, heat pipes)
8.2 TL-K12 Fan
- Neurriak: 120 (L) x 120 (W) x 25 (H) mm
- Abiadura baloratua: 2150 RPM ±10% (max)
- Zarata maila: 27 dBA (gehienez)
- Aire-fluxua: 69 CFM (gehienez)
- Airearen presioa: 2.87 mm H2O (max)
- Fan konektorea: 4 pin PWM haizagailuaren konektorea
- ARGB konektorea: 3 pin 5V
- Errodamendu mota: S-FDB V2 bearing
8.3 Plataformaren bateragarritasuna
- Intel: LGA115X, LGA1200, LGA1700, LGA1851
- AMD: AM4, AM5
9. Bermearen informazioa
Thermalright products are covered by a limited warranty against defects in materials and workmanship. The specific warranty period and terms may vary by region and product. Please retain your proof of purchase for warranty claims. For detailed warranty information, refer to the official Thermalright webwebgunean edo jarri harremanetan bere bezeroarentzako laguntzarekin.
10. Laguntza
If you encounter any issues or have questions regarding your Thermalright Peerless Assassin 120 Vision MAX ARGB CPU Cooler that are not addressed in this manual, please visit the official Thermalright website for FAQs, driver downloads, and contact information for technical support.
Ofiziala Webgunea: www.thermalright.com
