Sarrera
This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your BOJUK Window Cleaning Robot, Model C260. Please read this manual thoroughly before using the device to ensure optimal performance and safety.
Segurtasun-argibide garrantzitsuak
- Always attach the safety rope securely before operation, especially for high-rise windows.
- Ensure the power cord is properly connected and not damaged.
- Do not use the robot on cracked or damaged glass surfaces.
- Mantendu eskuak, ilea eta arropa solteak zati mugikorretatik urrun.
- Do not operate in rainy or extremely humid conditions.
- Supervise the robot during operation, especially during initial use.
- The Uninterrupted Power System (UPS) provides approximately 25 minutes of backup power in case of an outage. Retrieve the robot promptly during a power loss.
Paketearen edukia
Egiaztatu elementu guztiak paketean daudela:
- 1x Main Unit (Window Cleaning Robot)
- 1x korronte alternoko kablea
- 4x Cleaning Rings
- 1x Urruneko Kontrola
- 1x DC Extension Cord
- 1x Safety Rope
- 1x korronte egokitzailea
- 10x Garbiketa oihalak
- 1x Erabiltzailearen eskuliburua (dokumentu hau)
Konfigurazioa
- Attach Cleaning Cloths: Securely attach two clean microfiber cloths to the cleaning rings on the underside of the robot. Ensure they are flat and cover the entire cleaning pad area.

Image: Underside of the BOJUK Window Cleaning Robot showing the two circular cleaning pads where cloths are attached. The robot is white with blue cleaning pads.
- Ur depositua bete: Open the water tank cap and fill with clean water or a recommended window cleaning solution. Do not overfill. The robot features a dual spray system for effective cleaning.

Image: Diagram illustrating the dual spray system of the BOJUK Window Cleaning Robot. Water is sprayed from two nozzles onto the cleaning pads, ensuring even dampness for deep cleaning.
- Konektatu energia: Connect the AC power cord to the power adapter, then connect the adapter to the robot and a power outlet. Ensure the connection is secure.
- Attach Safety Rope: Securely attach one end of the safety rope to the robot and the other end to a sturdy anchor point indoors, such as a heavy furniture leg or a window frame anchor. This is crucial for preventing falls.

Image: The BOJUK Window Cleaning Robot operating on a window, with its safety rope secured to an indoor anchor point.
Funtzionamendu-argibideak
- Lekua: Place the robot on the window surface. Ensure it is flat against the glass. The robot will automatically create suction.
- Hasi garbitzen: Press the power button on the robot or the "Start" button on the remote control. The robot will begin its cleaning cycle.

Image: The BOJUK Window Cleaning Robot operating on a window, with its remote control shown in the foreground. The remote allows selection of different cleaning modes and manual control.
- Aukeratu garbiketa modua: Use the remote control to select one of the three cleaning modes:
- Top-down (N-mode): Cleans from top to bottom.
- Left-down (Z-mode): Cleans from left to right, then down.
- Right-down (Z-mode): Cleans from right to left, then down.
- Eskuzko kontrola: For specific areas, use the directional arrows on the remote control to guide the robot manually.
- Osatzea: The robot will automatically stop and return to its starting position once the cleaning cycle is complete. It will emit an audible alert.
- Retrieve Robot: Carefully grasp the robot and press the power button to release suction. Remove it from the window.
Mantentzea
- Garbiketa-oihalak: After each use, remove and wash the microfiber cleaning cloths. They are machine-washable. Ensure they are completely dry before reuse.
- Ur depositua: Empty any remaining water from the tank after use. Clean the tank periodically to prevent residue buildup.
- Sentsoreak: Regularly wipe the edge detection sensors and optical sensors with a soft, dry cloth to ensure accurate navigation.
- Biltegiratzea: Store the robot and its accessories in a cool, dry place away from direct sunlight.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Robot does not stick to window. | Insufficient suction; power not connected; surface too uneven or dirty. | Ensure power is connected. Clean the window surface first. Check for cracks or large imperfections on the glass. |
| Robot leaves streaks. | Dirty cleaning cloths; insufficient water/solution; window too dirty. | Replace or wash cleaning cloths. Refill water tank. For very dirty windows, perform a dry clean first, then a wet clean. |
| Robota trabatuta geratzen da edo modu irregularrean nabigatzen du. | Dirty sensors; obstacles on window; frameless window edge detection issue. | Clean all sensors. Remove any stickers or debris from the window. The robot is designed for frameless windows but may slow down at edges. |
| Robot falls during power outage. | Safety rope not attached; UPS battery depleted. | Always attach the safety rope. The UPS provides 25 minutes; retrieve the robot promptly during a power loss. |
Zehaztapenak
| Ereduaren izena | Leihoak garbitzeko robota |
| Modelo zenbakia | C260 |
| Marka | BOJUK |
| Xurgatze Potentzia | 3200Pa |
| Neurriak (L x W x H) | 23L x 11.4W x 30H zentimetro |
| Pisua | 2.5 kilo |
| Zarata Maila | 65 dezibelio |
| Bateriaren iraupena (UPS) | 25 minutes (Uninterrupted Power System) |
| Energia iturria | Kable elektrikoa |
| Kontrolagailu mota | Urruneko kontrola, Touchpad Kontrola |
| Azalera gomendioa | Windows, Tiles, Glass Doors, Mirrors |
| Ezaugarri bereziak | Dual Spray, AI Path Planning, Edge Detection, Anti-Drop Protection, 5m Safety Rope |
Bermea eta Laguntza
For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official BOJUK webgunea. Gorde erosketa-agiria berme-erreklamazioetarako.