NEWONE 18V Cordless 5-in-1 Power Tool Combo Kit User Manual

Sarrera

Thank you for choosing the NEWONE 18V Cordless 5-in-1 Power Tool Combo Kit. This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your new tool kit. Please read this manual thoroughly before using the product and keep it for future reference.

This kit includes a main power unit and five interchangeable attachments: an Impact Driver, a Drill, a Palm Sander, a Work Light, and a Circular Saw. It also comes with two batteries and a fast charger.

Segurtasun Jarraibide Orokorrak

OHARRA: Irakurri tresna elektriko honekin emandako segurtasun-abisu, argibide, ilustrazio eta zehaztapen guztiak. Behean zerrendatzen diren argibide guztiak ez betetzeak deskarga elektrikoa, sutea eta/edo lesio larriak eragin ditzake.

Lan Eremuko Segurtasuna

• Mantendu lan-eremua garbi eta ondo argiztatuta. Eremu nahasiak edo ilunek istripuak gonbidatzen dituzte.
• Ez erabili tresna elektrikoak atmosfera lehergarrietan, adibidez, likido sukoiak, gasak edo hautsak daudenean. Erreminta elektrikoek hautsa edo keak piztu ditzaketen txinpartak sortzen dituzte.
• Mantendu haurrak eta ingurukoak urrun, erreminta elektrikoa erabiltzen duzun bitartean. Distrakzioek kontrola galtzea eragin dezakete.

Segurtasun Elektrikoa

• Erreminten entxufeak entxufearekin bat etorri behar dira. Inoiz ez aldatu entxufea inola ere. Ez erabili entxufe egokitzailerik lurretik (lurreratuta) tresna elektrikoekin. Aldatu gabeko entxufeek eta bat datozen entxufeek deskarga elektrikoaren arriskua murriztuko dute.
• Saihestu gorputzaren kontaktua lurrarekin edo lurretik loturiko gainazalekin, hala nola hodiekin, erradiadoreekin, sukaldeekin eta hozkailuekin. Deskarga elektrikoa jasateko arriskua areagotu egiten da zure gorputza lurrarekin edo lurrarekin lotuta badago.
• Ez jarri tresna elektrikoak euria edo hezetasunera. Erreminta elektriko batean sartzeak deskarga elektrikoaren arriskua areagotuko du.

Segurtasun pertsonala

• Beti eraman begien babesa. Erabili segurtasun-ekipo egokiak, hala nola hauts-maskarak, irristagaitzak diren segurtasun-oinetakoak, kaskoak edo entzumen-babesak, beharrezkoa denean.
• Jantzi behar bezala. Ez erabili arropa solterik edo bitxirik. Mantendu zure ilea eta arropa zati mugikorretatik urrun.
• Egon adi, ikusi zer egiten ari zaren eta erabili zentzua erreminta elektrikoa ustiatzean. Ez erabili tresna elektrikorik nekatuta edo drogen, alkoholaren edo botiken eraginpean zauden bitartean.

Erremintaren erabilera eta zaintza

• Ez behartu tresna elektrikoa. Erabili tresna elektriko egokia zure aplikaziorako.
• Deskonektatu bateria tresna elektrikotik doikuntzak egin, osagarriak aldatu edo tresna elektrikoak gorde aurretik.
• Gorde inaktibo dauden erremintak haurren eskura eta ez utzi tresna elektrikoa edo argibide hauek ezagutzen ez dituzten pertsonei tresna elektrikoa erabiltzen.
• Mantendu tresna elektrikoak eta osagarriak. Egiaztatu pieza mugikorren lerrokadura desegokia edo lotzea, piezak apurtzea eta erreminta elektrikoaren funtzionamenduan eragina izan dezakeen beste edozein egoera. Hondatuta badago, konpon ezazu tresna elektrikoa erabili aurretik.

Bateria tresnaren erabilera eta zaintza

• Kargatu fabrikatzaileak zehaztutako kargagailuarekin soilik. Bateria mota baterako egokia den kargagailu batek sute-arriskua sor dezake beste bateria batekin erabiltzen denean.
• Erabili tresna elektrikoak berariaz izendatutako bateria-paketeekin soilik. Beste edozein bateria-pakete erabiltzeak lesio eta sute arriskua sor dezake.
• Bateria erabiltzen ez duzunean, urrun ezazu beste metalezko objektuetatik, hala nola paper-klipak, txanponak, giltzak, iltzeak, torlojuak edo beste metalezko objektu txiki batzuetatik, terminal batetik bestera konektatu dezaketenak. Bateriaren terminalak elkarrekin laburtuz gero, erredurak edo sua izan daitezke.
• Baldintza abusuetan, likidoa atera daiteke bateriatik; kontaktua saihestu. Ustekabean kontaktua gertatzen bada, garbitu urarekin. Likidoak begiekin kontaktuan jartzen badu, eskatu laguntza medikoa. Bateriatik botatako likidoak narritadura edo erredurak sor ditzake.

Produktuaren osagaiak

Your NEWONE 5-in-1 Power Tool Combo Kit includes the following main components:

• Main Power Unit (Handle, Motor, Trigger, Locking Switch, Direction Switch, LED Light)
• 18V Lithium-Ion Batteries (2 included: 4000mAh and 2000mAh)
• Kargatzaile azkarra
• Impact Driver Attachment
• Zulagailu eranskina
• Palm Sander Attachment
• Work Light Attachment
• Circular Saw Attachment
• Garraio Poltsa

Figure 1: Main Power Unit and Drill Attachment Components. This image illustrates the key parts of the main power unit, including the trigger, handle, motor, locking switch, direction switch, battery unlock button, and LED light, with the drill attachment connected.

Figure 2: Complete Kit Contents. This image displays all components included in the kit: the LED light, circular saw, impact driver, drill, palm sander attachments, two batteries, charger, and the carrying bag.

Konfigurazioa eta Muntaketa

1. Bateria kargatzea

1. Konektatu kargagailu azkarra entxufe estandar batera.
2. Irristatu bateria-paketea kargagailuan, bere lekuan klik egin arte.
3. The charger indicator light will show the charging status. A full charge typically takes 1-2 hours.
4. Guztiz kargatuta dagoenean, deskonektatu bateria kargagailutik.

Note: It is recommended to fully charge new batteries before first use to ensure optimal performance and lifespan.

2. Attaching a Tool Head

The NEWONE power tool features a patented quick-release system for easy attachment changes.

1. Ensure the main power unit is turned off and the battery is removed for safety.
2. Align the desired attachment (e.g., Drill, Impact Driver, Circular Saw) with the main power unit's connection point.
3. Push the attachment firmly onto the main unit until it clicks securely into place.
4. Rotate the locking knob on the motor to the locked position to ensure the attachment is firmly secured.

3. Removing a Tool Head

1. Ensure the main power unit is turned off and the battery is removed.
2. Rotate the locking knob on the motor to the unlocked position.
3. Press the quick-release button (if applicable) and pull the attachment away from the main unit.

4. Bateria jartzea/kentzea

1. To install: Align the battery pack with the base of the main power unit. Slide it in until it clicks securely.
2. To remove: Press the battery unlock button located on the battery pack and slide the battery out.

Figure 3: Quick Setup Guide. This image provides a visual step-by-step guide for attaching a tool head, securing it, inserting the battery, and starting the tool.

Funtzionamendu-argibideak

Funtzionamendu Orokorra

1. Ensure the correct attachment is securely installed and the battery is fully charged and inserted.
2. Select the desired direction of rotation using the direction switch (forward/reverse).
3. Press the trigger to start the tool. The speed is typically variable based on trigger pressure.
4. Askatu abiarazlea tresna gelditzeko.

Specific Attachment Operations

1. Drill Attachment

The drill attachment is used for drilling holes and driving screws. It has a maximum speed of 1300 RPM.

• Talagailuak aldatzea: Loosen the chuck by hand, insert the drill bit, and tighten the chuck firmly.
• Zulaketa: Apply steady, even pressure. For harder materials, use a slower speed.
• Gidatzeko torlojuak: Use appropriate screwdriver bits. Adjust clutch settings (if available on the drill head) to prevent over-driving screws.

2. Impact Driver Attachment

The impact driver is designed for driving screws and fasteners with high torque, up to 150 N·m, and a maximum speed of 2700 RPM.

• Bitak aldatzea: Pull the collar forward, insert the hex shank bit, and release the collar to lock the bit in place.
• Eragiketa: The impact mechanism engages when resistance is met, providing powerful rotational force.

3. Circular Saw Attachment

The circular saw attachment is for cutting wood and other materials. It has a no-load speed of 4500 RPM, a blade diameter of 85mm (3-3/8 inch), and a max cutting depth of 21mm (90°) or 14.8mm (45°).

• Blade instalazioa: Refer to the attachment's specific instructions for safe blade changes. Always ensure the blade is installed correctly and securely.
• Ebaketa: Set the desired cutting depth and angle. Ensure the workpiece is clamped securely. Guide the saw smoothly through the material, allowing the blade to do the work.
• Segurtasuna: Always wear appropriate eye protection and ensure guards are in place.

4. Palm Sander Attachment

The palm sander attachment is used for smoothing surfaces with a no-load speed of 10000 RPM.

• Attaching Sandpaper: Ensure the sander pad is clean. Align the sandpaper with the pad and press firmly to secure it (hook-and-loop system).
• Lixatzea: Move the sander in overlapping passes over the surface. Do not apply excessive pressure; let the sander do the work.

5. Work Light Attachment

The work light provides 300 lumens of illumination for dark work areas.

• Eragiketa: Simply attach to the main unit and press the trigger to activate the light. It can be used independently of other tool functions.

4. irudia: Aplikazio polifazetikoak. This image demonstrates the various uses of the NEWONE 5-in-1 tool kit, including cutting, sanding, driving screws, drilling, and providing illumination.

Mantentzea

Regular maintenance ensures the longevity and optimal performance of your NEWONE power tools.

Garbiketa

• Deskonektatu beti bateria garbitu aurretik.
• Erabili garbi bat, damp oihal bat tresnaren kanpoaldea garbitzeko. Ez erabili produktu kimiko gogorrik edo garbitzaile urratzailerik.
• Clear dust and debris from ventilation openings using compressed air or a soft brush.
• For attachments like the sander, regularly clean the sanding pad and remove any accumulated dust.

Biltegiratzea

• Store the tool kit and accessories in a dry, secure location, away from direct sunlight and extreme temperatures.
• Use the provided carrying bag for organized storage and transport.
• Ensure batteries are partially charged (around 50%) before long-term storage to preserve their lifespan.

Bateria zaintzea

• Do not store batteries in a discharged state. Recharge them periodically if not used for extended periods.
• Avoid exposing batteries to water or extreme heat.
• If a battery is damaged or no longer holds a charge, dispose of it responsibly according to local regulations.

Arazoak konpontzea

This section addresses common issues you might encounter with your NEWONE power tool kit.

If you encounter a problem not listed here or if the suggested solutions do not resolve the issue, please contact NEWONE customer support.

Zehaztapenak

Below are the technical specifications for the NEWONE 18V Cordless 5-in-1 Power Tool Combo Kit.

Figure 5: Motor and Battery Details. This image illustrates the powerful motor and the high-capacity battery system, detailing battery capacities, charging time, and typical working duration.

Bermea eta Laguntza

NEWONE products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official NEWONE webgunea.

For technical support, replacement parts, or service inquiries, please contact NEWONE customer service. You can often find contact information on the product packaging or the brand's official webgunea.

Visit the official NEWONE Store for more products and support: NEWONE Store on Amazon