VASAGLE Lift Top Coffee Table ULCT268BA01S Instruction Manual

1. Segurtasun informazioa

Please read and understand all instructions before assembly and use of this product. Keep this manual for future reference.

• Do not exceed the maximum static load capacity of 220 lb (100 kg) for the tabletop.
• Do not exceed the maximum static load capacity of 44 lb (20 kg) for the hidden compartment.
• Erabili aurretik, ziurtatu torloju eta lotura guztiak ondo estutu direla. Aldian-aldian egiaztatu eta berriro estutu behar izanez gero.
• Keep hands and fingers clear of the lift mechanism when raising or lowering the tabletop to prevent injury.
• Avoid placing hot items directly on the tabletop. Use coasters to protect the surface from condensation and heat.
• Produktu hau barrualdean erabiltzeko bakarrik dago pentsatuta.

2. Dakarten osagaiak

Muntaketa hasi aurretik, egiaztatu osagai guztiak daudela. Piezarik falta edo hondatuta badago, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin.

• 1 x Lift-Top Coffee Table (disassembled)
• 1 x Accessory Kit (includes all necessary screws, fasteners, and tools)
• 1 x Argibideen eskuliburua

3. Konfigurazioa eta Muntaketa

Assembly typically takes approximately 30 minutes. Follow the clear, step-by-step instructions provided in the accessory kit. All necessary tools are included.

Muntatzeko aholkuak:

• When attaching the gas springs, it may be necessary to push the springs forward slightly to align them with the screw holes.
• For easier installation of the lift brackets, first attach them to the base of the table. Then, carefully align the tabletop and attach it to the brackets. It may be helpful to lay under the table to attach the corner screws, then flip the table on its side to secure the remaining screws.

4. Funtzionamendu-argibideak

The VASAGLE Lift Top Coffee Table features a smooth gas spring lift mechanism for versatile use.

4.1 Lifting the Tabletop

To raise the tabletop, gently pull it upwards. The gas spring mechanism will assist in a smooth and controlled lift. The tabletop can be positioned at various heights, transforming the coffee table into a temporary computer desk or a small dining surface.

4.2 Lowering the Tabletop

To lower the tabletop, gently push it downwards. The gas spring will provide resistance for a controlled descent. Ensure the area is clear before lowering.

4.3 Biltegiratze konpartimentuak

The table includes a hidden compartment beneath the lift-top and an open storage shelf below. These provide ample space for organizing remotes, notebooks, books, blankets, and other items.

4.4 produktuaren bideoa

5. Mantentzea

Zaintza egokiak zure kafe-mahaiaren bizitza eta itxura luzatuko ditu.

• Garbiketa: Garbitu gainazalak leun batekin, damp oihal. Saihestu produktu kimiko gogorrak edo garbitzaile urratzaileak.
• Gainazalaren babesa: The tabletop veneer may be susceptible to damage from moisture. Always use coasters under drinks and placemats under hot dishes to prevent water rings and heat damage.
• Buffer Pads: The table is equipped with buffer pads to reduce noise and protect surfaces.
• Leg Clearance: The tall legs provide 5.9 inches (15 cm) of clearance, allowing for easy cleaning underneath, including access for robot vacuums.

6. Arazoak

Muntaketa edo erabileran arazoak izanez gero, jo ezazu honako ohiko irtenbide hauetara:

• Difficulty with Lift Mechanism: If the lift mechanism feels stiff or uneven, ensure all assembly steps related to the gas springs and brackets were followed correctly. Re-check that all screws are tightened. The mechanism is designed for smooth operation, but new units may require a few cycles to loosen.
• Tabletop Springs Open Too Quickly: Exercise caution when opening the hidden storage. The gas spring mechanism can cause the top to spring open rapidly. Guide it gently to prevent sudden movement.
• Table Stability Issues: Ensure the table is placed on a flat, even surface. Verify that all leg connections are secure. If excessive pressure is applied to the tabletop, the legs may have a tendency to slide outwards. Avoid leaning heavily on the table edges.
• Falta diren piezak: If any components are missing from the accessory kit, please contact VASAGLE customer support for assistance.

7. Zehaztapenak

8. Bermea eta Laguntza

For warranty information or customer support, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. Specific warranty terms and support contact details are typically provided by the point of purchase or directly by the manufacturer, VASAGLE.