1. Sarrera
Thank you for choosing the AIPER Seagull Pro ZT6002 Cordless Robotic Pool Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and retain it for future reference.

Image: The AIPER Seagull Pro ZT6002 robotic pool cleaner positioned at the edge of a swimming pool.
2. Segurtasun-argibide garrantzitsuak
Kalte edo lesio arriskua murrizteko, jarraitu segurtasun neurri hauek:
- Irakurri arretaz erabiltzailearen eskuliburua gailua erabili aurretik.
- Do not run the device out of water.
- Ez piztu gailua kargatzen ari zaren bitartean.
- Charge the device indoors in a dry, well-ventilated area.
- Erabili hornitutako korronte egokitzailea soilik kargatzeko.
- Kargagailua konektatu aurretik, ziurtatu kargatzeko ataka lehor dagoela.
- Keep children and pets away from the pool cleaner during operation.
- Ez erabili garbigailua korronte-kablea edo entxufea hondatuta badago.
- For use in swimming pools only.
3. Produktua amaitu daview
The AIPER Seagull Pro ZT6002 is a cordless robotic pool cleaner designed for efficient cleaning of inground pools up to 1,600 sq.ft. It features advanced navigation, powerful scrubbing, and multiple cleaning modes.
Ezaugarri nagusiak:
- WavePath nabigazioa: Intelligent four-motor system for thorough cleaning of pool floors, walls, and waterlines.
- Horma-eskalada gaitasuna: Four-wheel-drive system enables effective scrubbing of walls and waterlines.
- Quad-Motor Performance: Four motors provide up to 196W of power, filtering up to 80 gallons of water per minute.
- Bateriaren iraupen hedatua: 7,800mAh battery offers up to 150 minutes of continuous cleaning.
- Karga azkarra: Fully recharges in 3–4 hours.
- Garbiketa modu anitz: Includes Floor, Wall, and Auto modes.

Irudia: Barnekoa view of the AIPER Seagull Pro ZT6002, highlighting the quad-motor system and water filtration process.
4. Konfigurazioa
4.1 Hasierako karga
- Ensure the pool cleaner is dry before charging.
- Connect the charging adapter to the cleaner's charging port.
- Plug the adapter into a power outlet indoors.
- Allow 3-4 hours for a full charge. The battery indicator will show charging status.

Image: The AIPER Seagull Pro ZT6002 connected to its charger indoors, illustrating the charging process and time.
5. Funtzionamendu-argibideak
5.1 Hedapena
- Once fully charged, ensure the cleaner is turned off.
- Jaitsi garbigailua igerilekura astiro-astiro. Hondora iritsiko da.
- Ensure there are no obstructions in the pool that could impede its movement.
5.2 Garbiketa modua hautatzea
The Seagull Pro ZT6002 offers three cleaning modes:
- Modu automatikoa: Cleans both the pool floor and walls/waterline.
- Solairuko modua soilik: Igerilekuko zoruan garbiketa zentratzen du.
- Horma Bakarrik Modua: Igerilekuko paretetan eta ur-lerroan garbiketa lantzen du.
Use the intuitive control dial on top of the unit to select your desired cleaning mode. The dial also features a 4-color battery indicator to monitor real-time battery status.

Image: The control dial of the AIPER Seagull Pro ZT6002, illustrating the three cleaning modes.

Image: The intuitive control dial with a 4-color battery indicator for real-time monitoring of battery status.
5.3 WavePath Navigation
The WavePath Navigation system ensures comprehensive cleaning. In Auto Mode, the cleaner performs an 'S' pattern for the pool floor when the battery is over 50%, and an 'N' pattern for walls and waterline when the battery is below 50%.

Image: Visual representation of the WavePath Navigation system, demonstrating cleaning patterns for the pool floor and walls.

Image: Explanation of the AUTO mode operation, detailing cleaning behavior based on battery level.
5.4 Berreskuratzea
After the cleaning cycle is complete or the battery is low, the cleaner will typically park itself near a wall. Use the included retrieval hook to safely lift the cleaner out of the water. The quick-water release feature allows for easy portability.

Image: Demonstrating the easy retrieval of the AIPER Seagull Pro ZT6002 from the pool and its quick water release for handling.
6. Mantentzea
6.1 Iragazki-saskia garbitzea
Regular cleaning of the filter basket is crucial for optimal performance. The Seagull Pro ZT6002 features an easy-access top-load filter basket.
- Kendu garbigailua igerilekutik.
- Open the top cover to access the filter basket.
- Remove the basket and pour out any collected debris.
- Rinse the filter basket thoroughly with water to remove fine particles.
- Reinsert the clean filter basket and close the top cover securely.

Image: Steps for accessing and cleaning the debris filter basket of the AIPER Seagull Pro ZT6002.

Image: Features of the upgraded filter basket, performance in sloped pools, and drain cleaning capability.
6.2 Biltegiratzea
When not in use for extended periods, store the cleaner in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is partially charged (around 50%) before storage to prolong its lifespan.
7. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Garbigailua ez da pizten. | Bateria baxua edo kargatu gabe. | Charge the cleaner fully (3-4 hours). |
| Garbigailua poliki mugitzen da edo gelditu egiten da. | Iragazki-saskia beteta edo buxatuta dago. | Garbitu iragazkien saskia. |
| Garbitzaileak ez ditu hormak eraginkortasunez igotzen. | Low battery or dirty brushes/wheels. | Ensure battery is sufficiently charged. Clean brushes and wheels. |
| Garbiketa-errendimendu eskasa. | Filter basket is dirty or debris is too large. | Clean the filter basket. Remove large debris manually before operation. |
| Garbitzailea trabatuta geratzen da. | Obstruction in the pool or uneven surface. | Remove obstructions. The cleaner is designed to handle most pool surfaces. |
8. Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Marka | AIPER |
| Ereduaren izena | Seagull Pro 0529 |
| Modelo zenbakia | ZT6002-G |
| Produktuaren neurriak | 16"L x 10"Z x 16"A |
| Energia iturria | Bateriaren bidez |
| Bateria mota | Litio-Ioia |
| Bateria Edukiera | 7,800mAh (196.56 watt-ordu) |
| Exekuzioa | Gehienez 150 minutu |
| Kargatzeko Denbora | 3-4 ordu |
| Iragazte-gaitasuna | Up to 80 gallons per minute |
| Motor Potentzia | Up to 196W (Quad-Motor) |
| Pool Size Compatibility | Up to 1,600 sq.ft (Inground Pools) |
| Ezaugarri bereziak | Cordless, Rechargeable, WavePath Navigation, Wall-Climbing |
9. Bermea eta Laguntza
The AIPER Seagull Pro ZT6002 robotic pool cleaner comes with a two-year product protection. For warranty claims, technical support, or any inquiries, please contact AIPER customer service through their official website or the retailer where the product was purchased. Please have your model number (ZT6002) and proof of purchase ready when contacting support.