Honeywell-logotipoa

Honeywell kanalizatutako A eta B klase digitala bi norabidea Ampigogailuak

Honeywell-Kanalizatuta-Digital-A-eta-B Klasea-Bi-norabide-Amplifikatzaileak-produktua

The Digital BDA offers superior channel selective (Class A) or band-selective (Class B) amplification to be used in ERCES applications.

GENERAL

Honeywell offers all of the following components required for the design and installation of the Emergency Radio Communication Enhancement Systems (ERCES):

  • signal boosters/ Bi-Directional Amplifiers (BDA)
  • Distributed Antenna Systems (DAS) antennas
  • ardazkide kable
  • connectors and lightning arrestors
  • batteries and battery enclosures
  • design services and training
  • donor antennas
  • power dividers and hybrid couplers

SIGNAL BOOSTERS/BI-DIRECTIONAL AMPLIFIERS (BDA)

Honeywell Channelized Digital Class A and Class B BDAs are high-gain, high-power channel selective (Class A) or band-selective (Class B) signal boosters/bi- directional amplifiers that can be designed and customized to meet all public safety frequency band ranges in ERCES applications. It is intended to provide reliable two-way radio signal coverage inside buildings, tunnels and other structures. The state-of-the-art DSP-based filter design, combined with our industry leading, band-pass duplexer filters, deliver a reliable performance in even the most challenging RF environments. The product delivers high RF power with 5W rated amplifiers, while simultaneously, maintaining the industry leading, power efficiency and reliability. The innovative design delivers superior reliability and excellent performance in a small, lightweight, and economical package. The inclusive design includes the following features:

  • NFPA, IFC and UL® compliant supervisory interfaces
  • AC hornidura
  • Battery Charger and Dedicated Annunciator Panel.
  • Honeywell Channel and Band Selective, DSP Programmable Class A, Class B BDAs and power supplies

The DSP programmable Class A, Class B BDAs and power supplies are designed to meet and exceed the published UL 2524 2nd Edition standard requirements (UL 2524 2nd Edition listing pending) for In-building 2-Way Emergency Radio Communication Enhancement Systems, NFPA and IBC/IFC standards compliance.

Ezaugarriak eta abantailak

  • Support for public safety frequency bands, various Channel and Band Selective, DSP Programmable models available for the following:
    • Class A, UHF (406.1 – 512MHz): HON-BDA400-D5-1A
    • Class B, UHF (406.1 – 512MHz): HON-BDA400-D5-1B
    • Class A, 800MHz: HON-BDA800-D5-1A
    • Class B, 800MHz: HON-BDA800-D5-1B
    • Class A, 700MHz and 800MHz Dual Band: HON-BDA7800-D5-2A
    • Class B, 700MHz and 800MHz Dual Band: HON-BDA7800-D5-2B
  • Lower Total Cost of Ownership
    • High Power 5W (37dBm) Amplifiers with 10W (40dBm) Combined Downlink Power on 700/800 MHz Dual band models
    • High Gain: (92dB Typ)
    • 32-Channel Capacity (64 Channels with 700/800 MHz Dual band model)
  • Excellent RF Performance
    • -hannel Selective Class A Filters (12.5 or 25KHz)
    • Band Selective Class B (500KHz, 250KHz, 150KHz, 25KHz or 12.5KHz)
    • Low Processing Delay (12usec.) Filter Options
    • High Selectivity Filter Options
    • State-of-the-art DSP FPGA Digital Filter Design with programmable frequencies, selectivity and delay
  • Fidagarritasun handia
    • Low Noise Figure
    • Uplink Noise Squelch: Completely eliminates uplink noise from the BDA by shutting off the uplink amplifier, while it is idle achieving no transmissions from within the building and eliminating the risk of interrupting the public safety radio network
    • Oscillation Suppression Function built-in prevents amplifier feedback and oscillations
    • 3-year warranty (excluding battery)
  • NFPA, IFC Code Compliance
    • Supervisory Interfaces, NFPA-Compliant: Alarm relay outputs used for the fire alarm panel connection to monitor the BDA Includes a supervised, dedicated annunciator panel
    • Built-In Control Panel with Status Indications and Trouble Logs
    • High Efficiency Power Supply with a Choice of 12- 48Hr Battery Backup
    • NEMA-4 Rated Enclosures, Watertight Design
  • High-Efficiency Power Supply with a Choice of 12- 48Hr Battery Backup
    • PSU unit includes Power Supply, Charger, Battery Backup and Supervision
    • Eraginkortasun handia (>% 90)
    • Fully Supervised
    • Redundant AC Power Supplies
    • Smart Battery Charger with Battery Supervision
    • Built-in Control Panel with LED Status Indication

ELECTRICAL ZEHAZTASUNAK

Table 1 lists the electrical specifications for each Honeywell BDA models.

zehaztapena HON-BDA400-D5-1A HON-BDA400-D5-1B HON-BDA800-D5-1A HON-BDA800-D5-1B HON-BDA7800-D5-2A HON-BDA7800-D5-2B
Maiztasuna Range (MHz) DL: 406.1-512

UL: 402-512

DL: 406.1-512

UL: 402-512

DL: 851-862

UL: 806-817

DL: 851-862

UL: 806-817

UL1: 799-805

UL2: 806-817

DL1: 769-775

DL2: 851-862

UL1: 799-805

UL2: 806-817

DL1: 769-775

DL2: 851-862

FCC IDa 2AHPSB400M3A 2AHPSB400M3B 2AHPSB800M3A 2AHPSB800M3B 2AHVPSB7800M3A 2AHVPSB7800M3B
Amplifier Composite RF Output Power dBm (W), Max.*1 DL: 37dBm (5W) UL: 37dBm (5W) DL: 37dBm (5W) UL: 37dBm (5W) DL: 37dBm (5W) UL: 37dBm (5W) DL: 37dBm (5W) UL: 37dBm (5W) DL: 40dBm (10W)

Combined 700+800MHz UL: 37dBm (5W)

DL:40dBm (10W)

Combined 700+800MHz UL: 37dBm (5W)

Duplexer Insertion Loss dB (typ.) 2.5-6 dB 2.5-6 dB
Gain and Power Ripple within the rated Pass- band dB (typ.)
Selectable Channel Bandwidth for Each Channel (kHz) 12.5, 25 12.5, 25, 150,

250, 500

12.5, 25 12.5, 25, 150,

250, 500

12.5, 25 12.5, 25, 150,

250, 500

Channel Filter Capacity (Downlink + Uplink) 32 + 32 32 + 32 32 + 32 32 + 32 64 + 64 64 + 64
Selectable Channel Fil- ter Latency / Group Delay Per Channel (usec.) 12, 20, 48 12, 20, 48 12, 20, 48 12, 20, 48 12, 20, 48 12, 20, 48
Maximum System Gain (typ.) dB 92 92 92 92 92 92
Gain Adjustment Atten- uation Range in 1dB Steps (dB) 0-35 0-35 0-35 0-35 0-35 0-35
Power Adjustment Range 1dB Steps(dB) 0-15 0-15 0-15 0-15 0-15 0-15
Intermodulation (IM3) <-15dBm <-15dBm <-15dBm <-15dBm <-15dBm <-15dBm
Amplifier Noise Figure
Maximum RF Power Input for Rated IM3 -20dBm -20dBm -20dBm -20dBm -20dBm -20dBm
Sarrerako potentzia maximo absolutua 0dBm 0dBm 0dBm 0dBm 0dBm 0dBm
Impedance W 50 50 50 50 50 50
RF Connector Mota N-Emakumezkoen N-Emakumezkoen N-Emakumezkoen N-Emakumezkoen N-Emakumezkoen N-Emakumezkoen
Hornidura Boltageta VDC 28.5V DC 28.5V DC 28.5V DC 28.5V DC 28.5V DC 28.5V DC
Power Consumption Under Maximum Load
Abisua: These devices are NOT CONSUMER devices. The devices are designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. You MUST register Class B signal boosters (as defined in 47 CFR 90.219) online at www.fcc.gov/signal-boosters/registration. Baimenik gabeko erabilerak galtze-zigor handiak eragin ditzake, etengabeko urraketa bakoitzeko 100,000 $-tik gorako zigorrak barne.
Ohar: Changes or modifications not expressly approved by the Manufacturer, responsible for compliance, could void the user’s authority to operate the equipment.

MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS

Table 2 lists the mechanical and environmental specifications for each BDA model.

zehaztapena HON-BDA400-D5-1A HON-BDA400-D5-1B HON-BDA800-D5-1A HON-BDA800-D5-1B HON-BDA7800-D5-2A HON-BDA7800-D5-2B
Itxituraren Ingurumen Balorazioa NEMA-4 (Type-4) NEMA-4 (Type-4) NEMA-4 (Type-4) NEMA-4 (Type-4) NEMA-4

(Type-4)

NEMA-4 (Type-4)
Neurriak (WxDxH) 23.23"x8.32"x24" 23.23"x8.32"x24" 23.23"x8.32"x24" 23.23"x8.32"x24" 23.23"x8.32"x25.4" 23.23"x8.32"x25.4"
Weight (With Duplexers) Typ. (lbs) <59 <59 <59 <59 <59 <59
Itxituraren kolorea Red (RAL3000) Red (RAL3000) Red (RAL3000) Red (RAL3000) Red (RAL3000) Red (RAL3000)
tenperatura Funtzionamendu

° F (° C)

+ 22-140

(-30tik +60era)

+ 22-140

(-30tik +60era)

+ 22-140

(-30tik +60era)

+ 22-140

(-30tik +60era)

+ 22-140

(-30tik +60era)

+ 22-140

(-30tik +60era)

Recommended Operating Environment Temperature

° F (° C)

+ 14-86

(-10tik +30era)

+ 14-86

(-10tik +30era)

+ 14-86

(-10tik +30era)

+ 14-86

(-10tik +30era)

+ 14-86

(-10tik +30era)

+ 14-86

(-10tik +30era)

PSU (BDA-EPSU-300A-ASSY) Technical Specifications:

Table 3 lists the PSU Technical Specifications.

zehaztapenak Ezarpenak
AC barrura 100 – 250V / 50-60Hz / 3A @ 120V
DC Irteera 28.5V / 7A Continuous Duty
Kargatzeko korrontea 5.5A
Supervisory Functions AC, Battery Capacity, Battery V, Charging Current, Load Presence, Temp, MCU PSU Diagnostic, V out, I out
Babes DC Out and Charger Electronic Current Limiting + ATC Mini Fuse. AC Input Fuse
tenperatura Funtzionamendu -22 eta +140 °F (-30 eta +60 °C)
Itxituraren Ingurumen Balorazioa NEMA-4 (Type-4, Waterproof UL Listed)
Itxituraren neurriak 24 "W x 10" D x 24 "H
Weight with PSU, without batteries 51 kgs.

PSU konexioak

Table 4 lists the PSU Connections.

Component Konexioak
Enclosure Connections Requires NEMA-4 Waterproof Conduit
CA korronte konexioa Built-In Duplex Power Outlet Included
DC konexioa Wire Terminal Included (10-14AWG Wire)
Bateria konexioa Fuse and Wire Harness Included
Zaintza CAT-5 Jumper to BDA

Batteries and Battery Enclosure

  • NEMA-4, UL Type-4 Listed Battery Enclosure
  • 12V / 75Ah battery, minimum two are required for each BDA.

Donor Antennas

  • Installed on the Roof of the building.
  • Pointing to the public safety radio repeater site, line of sight not required.
  • High gain, high directivity Yagi Antennas for various frequency bands.

DAS Antennas

  • Installed in-building based on the design to achieve coverage.
  • Fiberglass and Low Profile antennas for various frequency bands.

Kable ardazkide

  • Plenum Rated, ½” diameter with low insertion loss.
  • Red cable color to differentiate for Public Safety BDA use.

Connectors and Lighting Arrestors

  • Various types of connectors, cable jumpers for ½” cable.
  • Coaxial surge protector, UL listed.
  • Cable jumper and Antenna Sensor / EOL termination for Donor Antenna.

Power Dividers and Hybrid Couplers

  • 2/3/4-way power dividers for various frequency bands.
  • Directional couplers for various dB and Frequency bands.

Zerbitzuak

  • Services for BDA iBwave System Design, Drawings, BOM.
  • Services for BDA Training.

illustrates the setup for a typical BDA System RiserHoneywell-Kanalizatuta-Digital-A-eta-B Klasea-Bi-norabide-Amplifiers-fig-1

INFORMAZIOA ORDUTEGIA

Signal Boosters / Bi-Directional Amplifiers (BDA)
  • HON-BDA400-D5-1A: Class A, UHF Digital BDA, 406.1–512MHz, 5W, Honeywell
  • HON-BDA400-D5-1B: Class B, UHF Digital BDA, 406.1–512MHz, 5W, Honeywell
  • HON-BDA800-D5-1A: Class A, 800MHz Digital BDA, 5W, Honeywell
  • HON-BDA800-D5-1B: Class B, 800MHz Digital BDA , 5W, Honeywell
  • HON-BDA7800-D5-2A: Class A, 700MHz & 800MHz Dual Band Digital BDA, 5W,
  • HON-BDA7800-D5-2B: Class B, 700MHz & 800MHz Dual Band Digital BDA, 5W, Honeywell
Batteries and Battery Enclosure
  • BDA-EPSU-300A-ASSY: Battery backup / external power supply for BDA, Type-4 certified enclosure.
  • BDA-EPSU-300A: External power supply only for BDA, excludes enclosure.
  • BDA-ENCL-15UL4: Battery Backup Enclosure assembly only, excludes power supply.
  • BDA-BB-75-10: Battery, 12V/75Ah each. (minimum two are required for each BDA/signal booster).
Cable, Connectors, and Lightning Arrestors
  • BDA-CABLE-10A-250: 250 ft. Cable, Red Jacket, Imprinted, 1/2″ Corrugated Alum Plenum Air Dielectric, 50 Ohm Coaxial.
  • BDA-CABLE-10A-500: 500 ft. Cable-Black Jacket, Imprinted, 1/4” Corrugated Copper Foam Dielectric, 50 Ohm Coaxial.
  • BDA-CABLE-15A-250: 250 ft. Cable – Black Jacket, Imprinted, 1/4″ Corrugated Copper Foam Dielectric, 50 Ohm Coaxial.
  • BDA-CABLE-15A-500: 500 ft. Cable – Black Jacket, Imprinted, 1/4″ Corrugated Copper Foam Dielectric, 50 Ohm Coaxial.
  • BDA-NMC-10: N-Male Connector for 1/2″ cable.
  • BDA-NFC-11: N-Female Connector for 1/2″ cable.
  • BDA-NMC-40A: N-Male connector for 1/4″ Cable.
  • BDA-NFC-41A: N-Female connector for 1/4″ Cable.
  • BDA-EOL-10: Antenna Sensor / End of the line termination.
  • BDA-JMPRG-10: Coaxial Cable Jumper NM-NM RG58, 18″ long.
  • BDA-JMPRG-11: Coaxial Cable Jumper NM-NM RG58, 37″ long.
  • BDA-LA-P8AX-6G: Coaxial surge protector, UL listed.
  • BDA-JMPRG-12: Coaxial Cable Jumper NM-NM 1/4″ Superflex, Outdoor UV, 48″ long
  • BDA-JMPPL-19: Coaxial Cable Jumper NM-NM Plenum, UL Listed Red Cable, 10″ long
  • BDA-JMPPL-20: Coaxial Cable Jumper NM-NM Plenum, UL Listed Red Cable, 18″ long
  • BDA-JMPPL-21: Coaxial Cable Jumper NM-NM Plenum, UL Listed Red Cable, 37″ long
  • BDA-ADP-RA-1: Right Angle N Male to N Female Adapter.
  • BDA-GKCK-10: Coaxial Cable Grounding Kit.
Power Dividers and Hybrid Couplers
  • BDA-PD2-4588-1: 2-way power divider/combiner, 450-880MHz, 50W, Wilkinson type.
  • BDA-PD3-4588-1: 3-way power divider/combiner, 450-880MHz, 50W, Wilkinson type.
  • BDA-PD4-4588-1: 4-way power divider/combiner, 450-880MHz, 50W, Wilkinson type.
  • BDA-PD2-1552-1: 2-way power divider/combiner,150-520MHz, 50W, Wilkinson type.
  • BDA-PD3-1552-1: 3-way power divider/combiner,150-520MHz, 50W, Wilkinson type.
  • BDA-PD4-1552-1: 4-way power divider/combiner,150-520MHz, 50W, Wilkinson type.
  • BDA-DC6-3588-1: Directional Coupler 6dB, 350-880MHz
  • BDA-DC10-3588-1: Directional Coupler 10dB, 350-880MHz
  • BDA-DC15-3588-1: Directional Coupler 15dB, 350-880MHz
  • BDA-DC20-3588-1: Directional Coupler 20dB, 350-880MHz
DAS Antennas
  • BDA-FA-450470-1: DAS Antenna, Fiberglass 450-470MHz
  • BDA-FA-465490-1: DAS Antenna, Fiberglass 470-490MHz
  • BDA-FA-700-1: DAS Antenna, Fiberglass 763-805MHz
  • BDA-FA-800-1: DAS Antenna, Fiberglass 806-869MHz
  • BDA-FA-7800-1: DAS Antenna, Fiberglass 763-869MHz
  • BDA-FA-7800-2: DAS Antenna, Fiberglass 763-869MHz
  • BDA-LPA-4502700-1: DAS Antenna, Low Profile, Ultra Broadband, 450-2700MHz
  • BDA-LPA-7800-1: DAS Antenna, Low Profile 763-869MHz
  • BDA-DP-7800-2: DAS Antenna, Directional Panel 763-869MHz
  • BDA-DP-400-2: DAS Antenna, Directional Panel UHF
Donor Antennas
  • BDA-DA-450470-1: Donor Antenna, Yagi Directional 450-470MHz
  • BDA-DA-465490-1: Donor Antenna, Yagi Directional 470-490MHz
  • BDA-DA-800-1: Donor Antenna, Yagi Directional 806-869MHz
  • BDA-DA-700-1: Donor Antenna, Yagi Directional 763-805MHz
  • BDA-DA-7800-1: Donor Antenna, Yagi Directional 763-869MHz
  • BDA-DA-LP582700-1: Donor Antenna, Log-Periodic Directional Broadband 580-2700MHz, High FB Ratio
Zerbitzuak
  • BDA-SVC-10: BDA iBwave System Design, Drawings, BOM (Unit Ea.)
  • BDA-TRAINING-1DAY: BDA Training, 1 DAY Unit

CHANNELIZED DIGITAL CLASS A AND CLASS B BDA TECHNICAL

AGENTZIEN ZERRENDAK ETA ONESPENAKHoneywell-Kanalizatuta-Digital-A-eta-B Klasea-Bi-norabide-Amplifiers-fig-2

Honeywell-Kanalizatuta-Digital-A-eta-B Klasea-Bi-norabide-Amplifiers-fig-3

Zerrenda eta onespen hauek dokumentu honetan zehaztutako moduluei aplikatzen zaizkie. Zenbait kasutan, baliteke onarpen-agentzia jakin batzuek modulu edo aplikazio batzuk zerrendatu ez izatea, edo zerrenda prozesuan egotea. Kontsultatu fabrikari azken zerrendaren egoera ezagutzeko.

  • NFPA 72 Compliance
  • NFPA 1221 Compliance
  • IFC Compliance
  • FCC Title 47 Part 90
  • FCC Title 47 Part 15b

Honeywell Business Solutions

firealarmresources.com

HON-62044 | A | 08/20
© 2020 Honeywell International Inc.

©2020 by Honeywell International Inc. All rights reserved.

The unauthorized use of this document is strictly prohibited. UL® is a registered trademark of Underwriter’s Laboratories Inc. This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications oranticipate all requirements. All specifications are subject to change without notice.

Jatorrizko herrialdea: USA

Dokumentuak / Baliabideak

Honeywell kanalizatutako A eta B klase digitala bi norabidea Ampigogailuak [pdf] Jabearen eskuliburua
A eta B Klase Digitala kanalizatua Bi-norabide Amplifiers, Channelized, Digital Class A and Class B Bi-Directional Amplifiers, Bi-Directional Ampigogailuak

Erreferentziak

Iruzkin bat

Zure helbide elektronikoa ez da argitaratuko. Beharrezko eremuak markatu dira *