Honeywell IPGSM-4G Single or Dual Path Commercial Fire Communicator Owner's Manual

The IPGSM-4G is a commercial fire alarm communicator that offers contact ID reporting with any Fire Alarm Control Panel (FACP) that has a built-in dialer. This single or dual path communicator connects directly to the primary and secondary communication ports of a fire panel’s Digital Alarm Communicator Transmitter (DACT). It offers three selectable reporting paths which include: Cellular only, IP only, or IP primary/cellular backup. All signals from the IPGSM 4G are delivered to Honeywell’s AlarmNet® Network Control Center, which routes highly encrypted Ethernet data packets via a customer provided internet connection or cellular network to the appropriate central station. The state of the art AlarmNet network control center is fully redundant and monitored 24/7. AlarmNet has the ability to route messages using AlarmNet-I and 800 PLUS services, providing true redundancy and multi-path message delivery.
Alternative communication methods are critical in the marketplace due to VoIP (Voice over IP), migration from POTS (Plain Old Telephone Service) and growth of digital radio networks. The IPGSM-4G’s single path communications solution allows one technology to be used (either IP or cellular) to provide the appropriate connectivity to a central station. For added reliability, our exclusive dual path solution allows both technologies (IP and cellular) to be used together for maximum survivability or for local jurisdiction requirements that specify a dual technology system.

EZAUGARRIAK ETA ONURAK

Bi telefono linea dedikaturen kostua aurrezten du.
Single or dual path communications- (can communicate to central station using cellular technology, internet, or both.

Requires no change to the existing Fire Alarm Control Panel configuration. (Connects directly to the primary and secondary telephone ports of a DACT.)
Operates over the following communication protocols: HSPA+ (4G) HSPA (HSDPA & HSUPA) (3G), EDGE (2G GPRS) (2G).

Selectable reporting paths and supervision intervals to meet NFPA 72, chapter 26 requirements. (Compliant with NFPA 72 2010 and 2013 supervision requirements.)
Works over any type of customer provided Ethernet 10/100 based network connection (LAN or WAN), DSL modem or cable modem.

Datuak kontaktu-ID protokolo estandarraren bidez transmititzen dira, baina industriako enkriptazio estandar aurreratuarekin (AES 256 bit) babestuta daude.
Supports both dynamic (DHCP) or Public and Private Static IP addressing.

Elikatze-hornidura-modulu integratua: kargatzeko zirkuituaren diseinuak babesko bateriak hartzen ditu. Energia nagusia eta bateriaren gainbegiratzea barne hartzen ditu.
Diagnostiko LEDak: Seinalearen indarra eta egoera adierazleak.

Konexio fidagarria: IP eta GSM konexioa egunero probatzen da.
QOS: Quality of Service diagnostics via AlarmNet conveys vital communicator information including when message was received, signal strength, and message path used.

7720P Eskuko programatzailea erraz konfiguratzeko.

The IPGSM-4G is designed to operate over the most common cellular networks, including 3G and HSPA+. Its multi-GSM platform technology automatically chooses the best available cellular signal in the area based on signal strength and seamlessly self-adjusts to maintain critical life safety communication. In addition, it connects to any type of customer provided Ethernet 10/100 base network connection (LAN or WAN), DSL model or cable modem. Our selectable reporting path feature allows the radio to be configured for a single or dual path solution as well as the appropriate supervision intervals based on NFPA 72 requirements. (See diagram below for selectable paths and supervision timing intervals.)

Eragiketa

When an event occurs, the Fire Alarm Control Panel goes off hook to dial the central station. The IPGSM-4G Dialer Capture Module detects the off-hook condition and provides the fire panel with a dial tone. When the fire panel detects the dial tone, it begins dialing the central station. After the dialing is completed, the Dialer Capture Module returns a handshake to the fire panel. The fire panel then sends the contact ID reports to the Dialer Capture Module, which in turn sends a kiss-off after the report is successfully received from the fire panel. The Dialer Capture Module sends the contact ID reports to the IPGSM communications module. When all the reports are sent, the fire panel goes on-hook. The IPGSM communications module then transmits the messages to the central station either over the GSM network or the Internet (dependent on configuration).

Programatzeko erraza

The IPGSM-4G communicator can be pre-programmed using the 7720P programmer to enter all central-station information. This is saved to the IPGSM-4G communicator panel memory. When the IPGSM-4G communicator is installed at the site and connected to the Internet/Intranet, it registers itself with the AlarmNet receiver.
Instalazio gehienetarako, beharrezkoak diren parametro bakarrak hauek dira:

Zure kontrol-estaziotik lortutako hiriaren ID nagusia (bi digitu).
Estazio Zentralaren ID nagusia (bi digitu) zure monitorizazio-estaziotik lortutakoa.

Harpidedun ID nagusia (lau digitu) zure monitorizazio-estaziotik lortutakoa.
Komunikazio-moduluaren MAC IDa eta MAC CRC zenbakia kutxaren kanpoaldean eta moduluaren barruan kokatzen dira.

Parametro horiek guztiak monitorizazio estazioak esleitzen ditu.
Ohar: Some assembly is required. See Installation and Setup Guide
#800-12454 for full details.

Fire Communicator Capability
The IPGSM-4G is compatible with fire panels that use the Contact ID communications format as described in the SIA DC-05 standard.

AlarmNet
Honeywell-en AlarmNet 1986az geroztik nazio mailako liderra da alarma-komunikazioen teknologian. Alarma-seinaleak transmititzeko alternatiba fidagarria da, gure irrati-sareak estaldura zabala eskaintzen du Estatu Batuetan eta Kanadan. AlarmNet Network Control zentroak zerbitzari indartsuen seinaleak prozesatzen ditu 24/7 azpiegitura laguntzarekin hornitutako hainbat kokapenetan. AlarmNet sarea hardware zerbitzari erredundanteek, babeskopia beroko datu-baseek eta bateriaren babeskopia duten sorgailuek osatzen dute toki guztietan, zerbitzuaren jarraipena bermatzeko. Alarm-Net-en seinaleak estazio zentralaren hargailuetara transmititzen dira, Internet, irrati-sarea edo doako POTS zerbitzuaz osatutako komunikazio bide anitzak erabiliz.

Instalazio baldintzak

UL BETETZEA
To meet UL864/NFPA, ensure the following:

IPGSM-4G must be installed in accordance with NFPA (National Fire Protection Association) standards 70 and 72.
IPGSM-4G must be mounted in the same room and within 20 feet of the fire panel.

IPGSM-4G, and all equipment used for the IP connection (such as the router, hub, modem, etc.) shall be listed, must be powered from an un-switched branch circuit, and be provided with appropriate standby power.
IPGSM-4G must use the 7AH battery (not supplied) to provide 24-hour backup capability.

IPGSM-4G Technical Specifications

ELECTRICAL
Transformadoreak:

Lehen: 120 VAC, 60 Hz, 0.5 A
Bigarren: 18VDC, 50VA

Bateria:

One 12 V 7.0 AH lead-acid battery: (ez da hornitzen)
Bateria kargatzeko korrontea: 1 Amp gehienez
Battery discharge current: Standby 230mA, Active 950mA

KABINETARAKO ZEHATZAK

Neurriak: 14.875″ H x 12.75″ W x 3.0″ D (37.8 cm H x 32.4 cm W x 7.6 cm D)
Kolorea: Red

SHIPPING SPECIFICATIONS

Pisua: 5.3 kgs. (6.94 kg)
Neurriak: 15.625″ H x 13.79″ W x 9.25″ D (39.7 cm H x 34.9 cm W x 23.9 cm D)

TENPERATURA ETA HEZETASUNAK
Sistema honek NFPA eskakizunak betetzen ditu 0 -49 °C/32 – 120 °F eta %93 ± %2 RH-ko hezetasun erlatiboan (ez da kondentsatzen 32 °C ± 2 °C (90 °F ± 3 °F) Dena den, sistemaren egonean dauden baterien eta osagai elektronikoen bizitza baliagarrian eragin negatiboa izan daiteke muturreko tenperatura-tarteek eta hezetasunak. Hori dela eta, gomendatzen da sistema hau eta bere periferikoak 15-eko tenperatura normala duen ingurune batean instalatzea. 27 °C/60 – 80 °F.

PRODUKTU LERROAREN INFORMAZIOA

IPGSM-4G: Internet and Digital Cellular Fire Alarm Communicator Panel. Includes red cabinet with Ademco® key and lock, wall outlet box, Dialer Capture Module, IGSM Communications Module, antenna & mounting adapter, PowerBoost1 power supply, LED display board, transformer, manual, & required screws, cables, etc.
Antenna External Hardware

GSM-ANT3DB: 3db gain external/remote antenna
WA7626-CA: SNA to N Adapter
7626-50HC: 50 ft. antenna cable, low loss

7626-25HC: 25 ft. antenna cable, low loss

Ohar: The GSM-ANT3DB and the WA7626-CA are both required for installing an external antenna along with the necessary cable needed (7626-50HC: 50 ft. or 7626-25HC: 25 ft.)
Beste osagarriak

7720P: IPGSM-4G hand held programmer.

HPTCOVER: Plug-in transformer box for IPGSM communicator.
BAT-1270: Bateria 12 Volt, 7 AH, itxia.

AGENTZIEN ZERRENDAK ETA ONESPENAK
Beheko zerrendak eta onarpenak IPGSM-4G komunikatzaileen oinarrizko panelari aplikatzen zaizkio. Zenbait kasutan, baliteke onarpen-agentzia jakin batzuek modulu batzuk zerrendatzea edo zerrenda prozesuan egotea.
Kontsultatu fabrikari azken zerrendaren egoera ezagutzeko.

UL Zerrendatutako: S789
CSFM: 7300-1645: 0199
FDNY: COA #6219

Ademco® eta AlarmNet® Honeywell International Inc-ren marka erregistratuak dira.
Dokumentu hau ez da instalazio helburuetarako erabiltzeko. Gure produktuen informazioa eguneratuta eta zehatza izaten saiatzen gara. Ezin ditugu aplikazio zehatz guztiak estali edo eskakizun guztiak aurreikusi. Zehaztapen guztiak abisurik gabe alda daitezke.

Informazio gehiago eskuratzeko
Learn more about Honeywell’s IPGSM-4G and other products available by visiting www.honeywellpower.com.
Honeywell Power Products
Clintonville errepidea 12
Northford, CT 06472-1610
877.HPP.POWR
www.honeywell.com
firealarmresources.com

Dokumentuak / Baliabideak

Honeywell IPGSM-4G Single or Dual Path Commercial Fire Communicator [pdf] Jabearen eskuliburua
IPGSM-4G Single or Dual Path Commercial Fire Communicator, IPGSM-4G, Single or Dual Path Commercial Fire Communicator, Single Path Commercial Fire Communicator, Dual Path Commercial Fire Communicator, Commercial Fire Communicator, Fire Communicator