MOZA FMP18 Panel Bundle User Guide

MOZA FMP18 Panel Bundle

Hitzaurrea

Eskerrik asko erosketagatik.asing our product. This manual provides important information about the product’s features, safety instructions, and usage guidelines. Please read this manual carefully before using the product to ensure safe and proper operation. Keep this manual for future reference. If you have any questions or need further assistance, please visit our customer support page: https://www.alza.cz/contact-and-support
Inportatzailea: Alza.cz as, Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Zehaztapenak

Osagaien neurriak

• DDI (Direct Digital Indicator): 167.05 mm (Width) x 182.95 mm (Height)
• FPP (Flight Control Panel): 194.86 mm (Width) x 306.71 mm (Height)
• AMPCD (Armament Control Panel): 167.05 mm (Width) x 188.10 mm (Height)

Full Assembly Dimensions

• Zabalera osoa: 527.17 mm
• Guztira Altuera: 455.40 mm
• Depth (excluding desk mount): 81.20 mm
• Desk Mount Depth: 211.45 mm

Erabiltzailearen Gida

1. Button Frame and Display Assembly
   The button frame and display panel connect via a magnetic attachment. Ensure the correct orientation by aligning the pogo pin connectors on the frame with the contact points on the display before allowing the magnetic attachment to snap securely into place.
2. Display Panels & Mounting Brackets Assembly
   Attach the mounting brackets to the rear of the display panels. Secure each bracket by tightening the M4 screws into the mounting holes using the included 3 mm Allen key.
3. Desk Mount Assembly
   Assemble the desk mounts using the M4 screws and the 3 mm Allen key. Next, attach the mounting bracket to the rear of the display panel and secure it with the M4 screws using the same Allen key.
4. Adjusting the Desk Mount Angle
   Loosen the adjustment screws on the side of the desk mount using the M8 spanner to adjust the angle. Once the desired angle is set, tighten the screws securely.

Muntatzeko aukerak

Mahaigaineko muntaketa
Clamp the desk mount onto the edge of your desk and tighten the threaded rod to secure the device.

• Supported desk thickness: 10 to 70 mm.
• Note: Do not mount the device on fragile surfaces, such as glass.

Aluminiozko Profile Muntaketa

1. Insert T-nuts into the aluminium profile.
   Align the mounting holes on the bracket with the T-nuts, then secure the bracket by tightening the screws into the T-nuts.

Oharra: Aluminiozko profile mounting hardware (aluminium profiles, T-nuts, screws, corner brackets, etc.) is not included and must be purchased separately.

PC batera konektatzea

Use the included USB cables to connect the components to your PC:

• Display Panels (DDI & AMPCD):
  • Use a USB-A to USB-A cable for each panel.
  • Connect one end to the panel and the other to your PC.
  • The screen brightness can be adjusted using the physical buttons located on the rear of each panel.
• FPP Module:
  • Use the USB-A to USB-C cable.
  • Connect the USB-C end to the FPP and the USB-A end to your PC.
    Once connected successfully:
  • The device indicator light will turn on.
  • The device will appear as connected in the MOZA Cockpit software.

Connection Layout Details

• Each display panel (left, right, and bottom) connects directly to the PC using its own USB-A to USB-A cable.
• The central FPP module connects to the PC via a USB-C to USB-A cable.
• Each display panel also features an auxiliary 5V USB-C power input port next to its main USB port for external power, if required.

Oharra:

• All USB-A ports are USB 3.0. Using USB 2.0 cables may cause a malfunction.
• If the device indicator light flashes continuously after powering on, this may indicate insufficient power. Use an additional 5V USB-C cable to provide external power to the display.
• If you are using a USB hub, an externally powered USB hub is recommended.

Softwarea amaitu daview

Orri Nagusia
Select FMP18 from the device list in the sidebar to access its dedicated settings interface.

Panelaren ezarpenak
Within this interface, you can select individual panels and adjust their lighting effects, or choose a brightness control mode. The available modes include:

• Telemetry Mode: Brightness is linked to a selected telemetry parameter, enabling synchronised lighting with the in-game cockpit.
• Device Mode: Brightness is linked to device axis inputs, including axes from other MOZA Flight hardware.
• Manual Mode: Adjust the panel brightness directly through the software.

Pantailaren ezarpenak
In the Screen Settings menu, you can map each display to its physical mounting position. Once your FMP18 mounting layout is confirmed, assign the corresponding screen IDs and click
‘Apply’ to configure screen export automatically for all supported aircraft.

Neurriak

• Do not expose the device to liquids or moisture, as this may cause a fire or an electric shock.
• Saihestu gailua eguzki-argia zuzenean erabiltzea.
• Do not use MOZA flight simulation equipment in conjunction with MOZA racing equipment. Recommended indoor operating temperature: 5 °C to 30 °C.
• For your safety and well-being, please monitor your gaming time and take regular breaks. The device is not suitable for children under 6 years of age, as small accessories may pose a choking hazard.
• Children under 13 years of age must be supervised by an adult.
• Do not attempt to disassemble the equipment yourself; doing so will void the warranty. The equipment must be connected using the factory-supplied power supply to ensure electrical safety and protect your consumer rights.
• To ensure user safety, any repair or replacement of parts must only be carried out by an officially authorised service centre.
• The use of non-standard power supplies is strictly prohibited, even if the voltage and other technical specifications appear to match.
• Use only AC power from a standard wall outlet to prevent damage to the product.
• Ez jarri gailua bero-iturrietara.
• Unplug the power cable if the device is to be left unused for an extended period.
• If you detect any abnormality, stop using the device immediately and contact MOZA customer support or an authorised service centre.
• Mesedez, bisitatu gure ofiziala website and social media channels for the latest product updates.

Berme Baldintzak

Berme-politikak alda daitezke herrialdearen edo eskualdearen arabera. Berme-aldia eta estaldura bezalako xehetasun zehatzak lortzeko, kontsultatu produktua erosi duzun salmenta-kanalak emandako salmenta osteko politika. Salmenta osteko zerbitzua eskatu behar baduzu, jarri harremanetan produktua erosi duzun salmenta-kanalarekin edo baimendutako saltzailearekin. Ziurtatu erosketaren frogagiri baliozkoa ematen duzula, hala nola faktura edo eskaera-zenbakia, zerbitzua jasotzeko eskubidea duzula berresteko.

EBko Adostasun Adierazpena

Ekipo honek EBko zuzentarauetako funtsezko eskakizunak eta gainerako xedapenak betetzen ditu.

Ekipo elektriko eta elektronikoen hondakinak (WEEE)

Produktu hau ez da etxeko hondakin arrunt gisa bota behar Ekipo Elektriko eta Elektronikoen Hondakinei buruzko EBko Zuzentarauaren arabera (WEEE – 2012/19/EU). Horren ordez, erosketa tokira itzuli edo birzikla daitezkeen hondakinak biltzeko gune publiko batean entregatuko dira. Produktu hau behar bezala botatzen dela ziurtatuz gero, ingurumenean eta gizakien osasunean izan daitezkeen ondorio negatiboak saihesten lagunduko duzu, produktu hau hondakinen manipulazio desegokian eragin ditzaketenak. Xehetasun gehiago lortzeko, jarri harremanetan tokiko agintaritzarekin edo gertuen dagoen bilketa-puntuarekin. Hondakin mota hau modu desegokian botatzeak isunak eragin ditzake estatuko araudiaren arabera.