YABER Autoaren Abiarazlearen 4000A 26800mAh Erabiltzailearen Eskuliburua

1. Sarrera

Thank you for choosing the YABER Car Jump Starter. This device is designed to provide a reliable solution for starting your vehicle's battery, acting as a powerful power bank, and offering emergency lighting. This manual will guide you through the proper use, maintenance, and safety precautions to ensure optimal performance and longevity of your jump starter.

Having this device in your car's trunk provides peace of mind, ensuring you can start your car and get home without waiting for roadside assistance, especially when facing issues like a battery left unused for too long or low temperatures affecting battery performance.

Common scenarios where the YABER Jump Starter is essential.

2. Segurtasun ohartarazpen garrantzitsuak

Produktu hau erabili aurretik, irakurri eta ulertu segurtasun-informazio guztia. Argibide hauek jarraitzen ez badira, deskarga elektrikoak, sua edo lesio larriak gerta daitezke.

Smart Clamps Protection Features:

The YABER Jump Starter is equipped with smart clamps that incorporate multiple protection mechanisms to ensure safe operation:

• Tenperatura altuko babesa: Funtzionamenduan zehar gehiegi berotzea saihesten du.
• Alderantzizko konexioaren babesa: Abisatzen du eta kalteak saihesten ditu kloroa badagoamps gaizki konektatuta daude.
• Uneko babesaren gainekoa: Gehiegizko korronte-fluxuaren aurkako babes-neurriak.
• Alderantzizko kargaren babesa: Prevents current from flowing back into the jump starter from the vehicle battery.
• Alderantzizko polaritatearen babesa: Ensures correct polarity connection.
• Deskarga gaindiko babesa: Barneko bateria deskarga sakonetatik babesten du.
• Gainkargaren babesa: Prevents overcharging of the internal battery.
• Zirkuitu laburren babesa: Zirkuitu labur baten kasuan automatikoki itzaltzen da.

Smart clamps provide multiple layers of safety.

Visual representation of the smart clamp babes-ezaugarriak.

Segurtasun-neurri orokorrak:

• Ez sartu produktua uretan.
• Ez erabili produktua atmosfera lehergarrietan, adibidez, likido, gas edo hauts sukoien aurrean.
• Ez aldatu edo desmuntatu produktua.
• Mantendu haurren eskura.
• Erabili emandako giltza adimenduna bakarrik.ampak eta kableak.

3. Paketearen edukia

Mesedez, egiaztatu paketea elementu hauek dituen:

• Car Jump Starter (YA40) x 1
• Protective Smart Clamps (Red = positive; Black = negative) x 1
• C motako USB kablea x 1
• Inflator Hose x 1 (if applicable to your model variant)
• Erabiltzailearen eskuliburua x 1
• Biltegiratzeko kutxa x 1

The YABER Jump Starter and its included accessories.

4. Produktuaren ezaugarriak

The YABER Car Jump Starter is a versatile device offering multiple functionalities:

• Powerful Jump Starter: Delivers 4000A peak current, capable of starting all 12V gasoline engines and up to 10.0L diesel engines.
• High Capacity Power Bank: Features a 26800mAh battery capacity with two USB outputs (5V/2.4A, 9V/2A) and a USB-C input (5V/9V 2A) for fast charging of mobile devices.
• 12V/10A DC Output: Provides power for various 12V accessories.
• LED larrialdi argia: Integrated flashlight with 3 modes: Illumination (Normal), Strobe, and SOS for emergency situations.
• Extreme Temperature Operation: Designed to work reliably in temperatures ranging from -20℃ to +60℃ (-4°F to 140°F).
• Smart Clamps: Equipped with multiple safety protections as detailed in the Safety Warnings section.

Amaituview of the YABER Jump Starter's multi-functional capabilities.

5. Zehaztapenak

The jump starter is designed for reliable performance in a wide range of temperatures.

6. Konfigurazioa eta hasierako karga

Before first use, ensure the jump starter is fully charged. It is recommended to fully charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided Type-C USB cable to the USB-C input port on the jump starter.
2. Connect the other end of the USB cable to a suitable USB wall adapter (not included) or a powered USB port.
3. The digital display on the jump starter will show the charging progress. Charge until the display shows 100%.

The device supports two-way fast charging, allowing for quick recharging of the unit itself.

7. Funtzionamendu-argibideak

7.1. Ibilgailu bat martxan jartzea

Ibilgailua martxan jartzen saiatu aurretik, ziurtatu abiarazlea gutxienez % 50ean kargatuta dagoela.

1. Txertatu: Konektatu smart clamp cable into the jump starter's 12V jump start port. Ensure it is fully inserted.
2. Konektatu: Erantsi gorria (+) clamp to the positive terminal of your vehicle's battery and the black (-) clamp to the negative terminal. The smart clamps will indicate if the connection is correct.
3. Hasi: Start your car's engine. If it doesn't start immediately, wait 20-30 seconds and try again. Do not crank for more than 3 seconds per attempt.
4. Kendu: Once the car starts, immediately remove the smart clamps from the car battery, then unplug the smart clamp kablea jauzi-abiarazletik.

Visual guide for the jump starting process.

The YABER Jump Starter is suitable for a wide range of 12V vehicles.

7.2. Power Bank gisa erabiltzea

The jump starter can charge your electronic devices via its USB output ports.

1. Connect your device's USB charging cable to one of the jump starter's USB output ports (USB-1 or USB-2).
2. Abiarazleak automatikoki hasiko da zure gailua kargatzen.
3. Pantaila digitalak gainerako bateriaren ehunekoa erakutsiko dutage.

Charging multiple devices simultaneously with the power bank function.

7.3. Using the LED Emergency Light

The built-in LED light has three modes: Illumination (normal flashlight), Strobe, and SOS.

1. Press and hold the power button for approximately 3 seconds to turn on the Illumination mode.
2. Press the power button briefly to cycle through the modes: Illumination > Strobe > SOS.
3. Press and hold the power button again for 3 seconds to turn off the light.

The LED light provides versatile illumination for various situations.

Xehetasuna view of the LED emergency light modes.

8. Mantentzea eta biltegiratzea

• Kargatzen: Bateriaren iraupena luzatzeko, kargatu berriro abiarazlea 3-6 hilabetero, erabili ez bada ere.
• Garbiketa: Use a dry, soft cloth to clean the device. Do not use harsh chemicals or abrasive materials.
• Biltegiratzea: Store the device in a cool, dry place away from direct sunlight, heat sources, and moisture. Keep it in its protective storage box when not in use.
• Tenperatura: Avoid storing the device in environments outside its operating temperature range (-20℃ to +60℃).

9. Arazoak

Gailua ez da piztuko:

• Ziurtatu gailua kargatuta dagoela. Konektatu energia-iturri batera C motako kablea erabiliz.

Ibilgailuak ez du abiarazte automatikoa egiten:

• Check that the smart clamp cable is fully inserted into the jump starter.
• Ensure the red (+) and black (-) clamps are connected correctly to the vehicle battery terminals. The smart clamps should indicate a correct connection.
• Verify that the jump starter has sufficient charge (at least 50%).
• If the vehicle battery is completely dead, it may take a few attempts. Wait 20-30 seconds between attempts.
• If the smart clamps show an error, refer to the smart clamp's indicator guide (if available) or disconnect and reconnect carefully.

Gailuak ez dira kargatzen power bank-etik:

• Ziurtatu abiarazleak karga nahikoa duela.
• Check that the USB cable is securely connected to both the jump starter and your device.
• Probatu beste USB kable edo ataka batekin.

10. Erabiltzaileentzako aholkuak

• Always keep the jump starter charged, especially before long trips or during winter months when car batteries are more prone to failure.
• Familiarize yourself with the smart clamp indicators. They are designed to provide immediate feedback on connection status and potential issues.
• When jump starting, ensure your vehicle's ignition is off before connecting the clamps.
• After a successful jump start, allow your car's engine to run for a few minutes to recharge its battery before turning it off.

11. Bermea eta Laguntza

YABER products are manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact YABER customer service through the official webgunea edo zure erosketa puntua.

Mesedez, gorde zure erosketa-froga berme-erreklamazioetarako.

12. Maiz egiten diren galderak (FAQ)

Q: What power does the device charge? Is it 110V or 220V?

A: The YABER Jump Starter charges via a USB-C input (5V/2A, 9V/2A). You can use any standard USB wall adapter (110V or 220V compatible) with a USB-C output to charge the device. The jump starter itself does not have a direct 110V or 220V input.

Q: Is the product new and does it come with a warranty?

A: Yes, all new YABER products are sold with a manufacturer's warranty. Please refer to the 'Warranty and Support' section for more details.