LAUNCH CR319 OBDII Scanner User Manual

1. Sarrera

The LAUNCH CR319 is a powerful and user-friendly OBDII/EOBD scanner designed for diagnosing engine-related issues in vehicles. It provides comprehensive OBDII functions, allowing users to read and clear diagnostic trouble codes (DTCs), view live data, check I/M readiness, and more. This manual will guide you through the setup, operation, and maintenance of your CR319 scanner.

Figure 1: LAUNCH CR319 OBDII Scanner

2. Hasteko urratsak eta konfigurazioa

The LAUNCH CR319 is a plug-and-play device that requires no batteries or external applications. Simply connect it to your vehicle's OBD2 port.

2.1 Osagaiak gainetikview

Figure 2: CR319 Front and Back View

Figure 3: CR319 Product Dimensions and Controls

• Diagnostiko kablea: Eskanerra ibilgailuaren OBD2 atakara konektatzen du.
• LCD pantaila: Diagnostiko-informazioa erakusten du.
• Selection Buttons (Up/Down): Nabigatu menuetan eta aukeretan.
• Ados botoia: Hautaketak berresten ditu.
• ESC botoia: Uneko menutik edo funtziotik irteten da.

2.2 Konexio-urratsak

1. Locate the DLC (Data Link Connector): The 16-pin OBD2 port is usually located under the dashboard on the driver's side. Refer to your vehicle's manual if you cannot find it.


Figure 4: Locating the DLC Port

2. Konektatu eskanerra: Plug the CR319's diagnostic cable into the vehicle's OBD2 port.


Figure 5: Connecting the CR319

3. Piztea: Jarri ibilgailuaren piztea 'ON' posizioan (motorra itzalita edo martxan egon daiteke, probaren arabera). Eskanerra automatikoki piztuko da.

3. Funtzionamendu-argibideak

Once connected and powered on, the CR319 will display the main menu. Use the UP/DOWN buttons to navigate and the OK button to select.

Figure 6: Main Menu and Navigation

3.1 OBDII funtzio osoak

The CR319 supports all 10 modes of OBDII diagnostics:

Figure 7: Full OBDII Functions Overview

• Irakurri kodeak: Retrieves Diagnostic Trouble Codes (DTCs) from the vehicle's computer to identify the error location.
• Ezabatu kodeak: DTCak ezabatzen ditu eta matxura-adierazlea itzaltzen du Lamp (MIL), also known as the 'Check Engine' light.
• Zuzeneko datuak: Displays real-time information from the engine sensors, such as RPM, vehicle speed, coolant temperature, etc.


Figure 8: Live Data Stream Display

• I / M prest egotea: Checks the status of emission-related systems to determine if they are operating correctly and ready for inspection/maintenance testing.
• Izoztu markoa: Records a snapshot of vehicle conditions (parameters) at the moment an emission-related fault occurs, aiding in diagnosis.
• O2 sentsoreen proba: Berreskuratzea ahalbidetzen du eta viewing of O2 sensor monitor test results for the most recently performed tests.
• Monitorearen proba barnean: Views results of on-board diagnostic monitoring tests for specific components/systems. Useful after servicing or clearing control module memory.
• VIN Scan (Vehicle Information): Displays the Vehicle Identification Number (VIN), calibration identification, and calibration verification number (CVN) of the test vehicle.
• EVAP System (Mode $8): Allows initiation of a leak test for the evaporative emission control system.

3.2 DTC Lookup Library

The CR319 includes a built-in DTC lookup library, eliminating the need to search online for code definitions.

• Menu nagusitik, hautatu 'DTC bilaketa'.
• Input the error code using the navigation buttons.
• The scanner will display the definition and explanation of the code.

Figure 9: DTC Lookup in Action

3.3 Hizkuntza hautatzea

The CR319 supports multiple languages for user convenience.

• Menu nagusitik, joan 'Tresnen konfigurazioa' atalera.
• Select 'Languages'.
• Choose your preferred language from the list (English, French, Russian, Spanish, German, Italian, Portuguese).

10 irudia: Hizkuntza hautatzeko menua

4. Ibilgailuen bateragarritasuna

The LAUNCH CR319 is compatible with most OBDII/CAN protocol compliant vehicles manufactured from 1996 onwards.

Figure 11: Detailed Vehicle Coverage

4.1 Onartutako ibilgailu motak

• American Cars: Standard OBD2 Protocols from 2000 to present (e.g., Chrysler, Ford, GM, Jeep).
• Europako autoak: Standard OBD2 Protocols from 2003 to present (e.g., Alfa Romeo, SAAB, Acura, Opel, Audi, Seat, Peugeot, Renault, Bentley, Skoda, Daewoo, Benz, Daihatsu, Land Rover, BMW, Vauxhall, Citroen, Volvo, Fiat, VW, Ford, Jaguar).
• Japanese/Korean Cars: Standard OBD2 Protocols from 2006 to present (e.g., KIA, Isuzu, Honda, Mitsubishi, Hyundai, Dacia, Lexus, Mazda, Nissan, Subaru, Suzuki, Toyota).
• Txinako autoak: Standard OBD2 Protocols from 2009 to present.

Oharra: While compatible with most cars, regional differences in OBD2 protocol implementation or specific vehicle designs may lead to incompatibility with some models. The scanner supports 12V gasoline cars only; it does not support Diesel, 24V Heavy Duty, Hybrid, or Electric vehicles.

4.2 Supported OBDII Protocols

• SAE J1850 PWM (41.6 Kbaud)
• SAE J1850 VPW (10.4 Kbaud)
• ISO9141-2 (5 baud abiapuntua, 10.4 Kbaud)
• ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
• ISO14230-4 KWP (hasiera azkarra, 10.4 Kbaud)
• ISO15765-4 CAN (11bit ID, 500 Kbaud)
• ISO15765-4 CAN (29bit ID, 500 Kbaud)
• ISO15765-4 CAN (11bit ID, 250 Kbaud)
• ISO15765-4 CAN (29bit ID, 250 Kbaud)

5. Mantentzea

5.1 Software eguneraketak

The LAUNCH CR319 offers lifetime free software updates to ensure compatibility with new vehicle models and diagnostic protocols. Please visit the official LAUNCH webwebgunean eguneraketak deskargatu eta instalatzeko argibideak lortzeko.

5.2 Garbiketa eta biltegiratzea

• Garbitu gailua leun batekin, damp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Gorde gailua leku lehor eta fresko batean, eguzki-argitik eta muturreko tenperaturetatik urrun.
• Ensure the diagnostic cable is not kinked or damaged during storage.

6. Arazoak

6.1 Gai arruntak

• Potentziarik gabe: Ensure the scanner is correctly plugged into the vehicle's OBD2 port and the ignition is turned 'ON'. Check the vehicle's fuse for the OBD2 port if the issue persists.
• Komunikazio errorea: This message indicates the scanner cannot establish communication with the vehicle's ECU. Verify the vehicle is OBDII compliant (check year and type), ensure the connection is secure, and try on another compatible vehicle if possible.
• Pantaila izozten da: Disconnect the scanner from the vehicle, wait a few seconds, and reconnect. If the issue persists, ensure the software is up to date.

7. Zehaztapenak

8. Bermea eta laguntza

The LAUNCH CR319 comes with a 2-year warranty and lifetime technical support. For any issues or questions, please contact LAUNCH customer service or visit their official weblaguntza eskatzeko gunea.

The product is CE certified, ensuring it meets European safety, health, and environmental protection requirements.

9. Erabiltzaileentzako aholkuak

• Always ensure the vehicle's ignition is in the 'ON' position when using the scanner to ensure proper power and communication.
• For accurate diagnostics, make sure your vehicle is compatible with the OBDII protocol and falls within the supported manufacturing years.
• Keep the software updated to benefit from the latest vehicle compatibility and diagnostic features.
• The device is designed to be portable and easy to carry, making it convenient for quick checks or on-the-go diagnostics.

10. Paketearen edukia

Upon opening your LAUNCH CR319 package, you should find the following items:

• 1 * LAUNCH CR319 OBDII Scanner
• 1 * USB Cable (for updates)
• 1 * Erabiltzailearen eskuliburua

12. irudia: paketearen edukia

11. Produktuaren bideoa

Ikusi bideo hau azkar ikustekoview and demonstration of the LAUNCH CR319 OBDII Scanner's features and usage.