Sarrera
This manual provides essential instructions for the installation, operation, and maintenance of your replacement 2-in-1 HEPA and Carbon Filter, compatible with Rowenta Pure Air air purifier models PU3030, PU3030F0, and PU3030U0 (Filter model XD6231U0/XD6231). Please read this manual thoroughly before replacing your filter to ensure proper function and optimal air purification.
Produktua amaituview
The 2-in-1 filter combines a True HEPA filter and an Activated Carbon filter to provide comprehensive air purification. This composite design efficiently targets various airborne pollutants.
- HEPA iragazkia: Effectively captures up to 99.97% of airborne particles, including pollen, dust mites, mold spores, and other allergens.
- Karbon Aktibatutako Iragazkia: Designed to remove odors, smoke, volatile organic compounds (VOCs), and other gaseous particles from the air.


Konfigurazioa eta Instalazioa
Follow these steps to correctly install your new replacement filter:
- Prepare the Air Purifier: Ensure your Rowenta Pure Air air purifier is turned off and unplugged from the power outlet before beginning the filter replacement process.
- Access the Filter Compartment: Refer to your air purifier's original manual for specific instructions on how to open the filter compartment. This usually involves removing a back or front panel.
- Kendu iragazki zaharra: Carefully remove the used filter. It may be dusty, so handle it over a trash can.
- Deskonprimitu iragazki berria: Remove the new 2-in-1 HEPA and Carbon Filter from its protective packaging.
- Identify Filter Orientation: The filter has a distinct front (HEPA side, typically white and pleated) and back (Activated Carbon side, typically black and honeycomb-like). Ensure you orient the filter correctly according to your air purifier's design. The image below shows the typical appearance.
- Txertatu iragazki berria: Gently slide the new filter into the compartment. Make sure it fits snugly and securely.
- Itxi konpartimentua: Close the filter compartment door or panel securely.
- Reset Filter Indicator (if applicable): Plug in your air purifier and turn it on. If your model has a filter replacement indicator, follow its instructions to reset it.


Funtzionamendu-printzipioak
Once installed, the filter works in conjunction with your air purifier to clean the air. Air is drawn into the purifier, passes through the multi-layer filtration system, and then clean air is released back into the room.
- The HEPA layer captures fine particulate matter.
- The Activated Carbon layer adsorbs gases and odors.

Mantentzea
To maintain optimal performance of your air purifier and ensure continuous clean air, regular filter replacement is crucial.
- Ordezko maiztasuna: The filter needs to be replaced every 3-6 months. This timeframe can vary depending on air quality, usage frequency, and the presence of pets or smokers in the environment.
- Ez garbitu: This filter is not washable. Attempting to wash the HEPA or carbon components will damage them and reduce their effectiveness.
- Xedapena: Dispose of the old filter with regular household waste.
Arazoak konpontzea
If you experience issues after replacing your filter, consider the following:
- Aire fluxu murriztua: Ensure the filter is installed correctly and not obstructed. Check if the air purifier's intake and output vents are clear.
- Usain iraunkorrak: If odors persist shortly after replacement, verify the filter's orientation. If the filter has been in use for an extended period beyond the recommended 3-6 months, its carbon layer may be saturated, requiring a new replacement.
- Iragazkiaren adierazle-argia piztuta jarraitzen du: Consult your air purifier's original manual for instructions on how to reset the filter replacement indicator for your specific model.
Zehaztapenak
| Ezaugarri | Deskribapena |
|---|---|
| Mota | Air Purifier Parts (Composite Filter) |
| Eredu bateragarriak | Rowenta Pure Air PU3030, PU3030F0, PU3030U0 |
| Iragazi modeloaren zenbakia | XD6231U0 (XD6231) |
| 1. funtzioa | HEPA Filter (captures up to 99.97% of airborne particles) |
| 2. funtzioa | Activated Carbon Filter (removes odors, smoke, VOCs) |
| HEPA Material | Electrostatic electret melt-blown material; high air permeability, low wind resistance, efficient pollutant capture. |
| Activated Carbon Material | High-quality modified activated carbon particles; developed pores, wide area, strong adsorption capacity for formaldehyde, benzene, TVOC, and odors. |
| Jatorria | Txina kontinentala |
| Kezka handiko produktu kimikoa | Bat ere ez |


Bermea eta Laguntza
For any questions or assistance regarding this replacement filter, please contact the seller or manufacturer's customer support. They will provide the best solution for any issues you may encounter.
Erabiltzailearen aholkuak
- Ohiko egiaztapenak: Periodically check the filter for visible dust and debris, especially if you live in an area with high pollution or have pets. While not washable, a visual check can help you anticipate replacement needs.
- Errendimendu optimoa: Adhering to the 3-6 month replacement schedule is key to maintaining the air purifier's efficiency and ensuring healthy indoor air quality.





