SINOTIMER IL Plug Digital Programmable Timer Switch User Manual

1. Produktua amaitu daview

The SINOTIMER IL Plug Digital Programmable Timer Switch is designed to control electrical appliances by setting specific ON/OFF times over a 7-day weekly cycle. It features a digital display, multiple programming options, and a built-in battery for program backup.

Figure 1: SINOTIMER TM518-IL and TM519-IL models.

1.1 Ezaugarriak

• Up to 20 ON/OFF setting programs.
• 1 Countdown program for ON or OFF countdown switching.
• Time setting includes hour, minute, and week.
• Random function for ON/OFF switching randomly to simulate occupancy, enhancing home security.
• Summer / Winter saving time setting & switching.
• Built-in rechargeable Ni-MH battery (1.2V/40mAh) for program memory backup (over 100 hours / 120 days standby).
• Manual ON/OFF/AUTO switching modes.
• Suitable for various electrical appliances like rice cookers, water dispensers, heaters, liquid electric mosquito coils, and for charging batteries (electric vehicle, digital camera, cell phone).

1.2 Zehaztapenak

2. Instalazioa eta hasierako konfigurazioa

2.1 Instalazio fisikoa

1. Plug the timer switch into a standard IL wall socket (230V/50Hz power supply).
2. Plug your appliance (e.g., lamp) into the socket on the timer.
3. Ensure the power consumption of the controlled appliance is within the maximum 3600W resistive load.
4. If the appliance has its own switch, make sure it is switched ON.

Figure 2: SINOTIMER TM518-IL with Israel Plug.

2.2 Resetting the Timer

Before first use or after a long period of storage, press the small 'R' (Restore Factory Defaults) button using a pointed object (like a pen tip) to clear all settings. The display will show "MO 00:00" and start in clock mode.

2.3 Uneko ordua ezartzea

Uneko eguna eta ordua ezartzeko:

1. Sakatu ERLOIA botoia, eta gero sakatu ASTEA to scroll up the day of the week until the current day is displayed. Long press ASTEA for more than 2 seconds for rapid adjustment.
2. Sakatu ERLOIA botoia, eta gero sakatu ORDUA to scroll up the hour until the current hour. Long press ORDUA for more than 2 seconds for rapid adjustment.
3. Sakatu ERLOIA botoia, eta gero sakatu MIN to scroll up the minute until the current minute. Long press MIN for more than 2 seconds for rapid adjustment.

3. Funtzionamendu-argibideak

3.1 ON/OFF zikloen programazioa

Tenporizadoreak 20 pizteko/itzaltzeko programa onartzen ditu gehienez. Programa bat ezartzeko:

1. Sakatu PROG botoia behin sakatu. Pantailak "1 ON" erakutsiko du.
2. Sakatu ASTEA to select the desired day or group of days for this program. Available combinations include:
   • astelehena
   • asteartea
   • asteazkena
   • Osteguna
   • ostirala
   • Larunbata
   • Igandea
   • Monday - Sunday
   • Monday - Friday
   • Saturday - Sunday
   • Astelehenetik larunbatera
   • Astelehena, asteazkena, ostirala
   • Asteartea, osteguna, larunbata
   • Monday, Tuesday, Wednesday
   • Osteguna, ostirala, larunbata
3. Sakatu ORDUA to set the hour for the "ON" time.
4. Sakatu MIN to set the minute for the "ON" time.
5. Sakatu PROG berriro. Pantailak "1 OFF" erakutsiko du.
6. Repeat steps 2-4 to set the "OFF" time for the first program.
7. Jarraitu sakatzen PROG to advance through programs 2-20 (ON and OFF settings).
8. Programazio modutik irteteko, sakatu ERLOIA key. If no key is pressed for 15 seconds, the timer will automatically return to normal operation mode.

Note: The output is ON during the countdown period.

3.2 Programming Countdown Operation

To set a countdown timer:

1. Sakatu PROG button repeatedly until the display shows "CON ---" (after the 20 groups program).
2. Sakatu ORDUA eta MIN buttons to set the desired countdown time (from 1 minute to 99 hours and 59 minutes). Long press ORDUA or MIN for more than 2 seconds for rapid adjustment.
3. Erabili MODUA key to switch the countdown function between ON or OFF.
4. Sakatu ERLOIA key or wait 15 seconds to save the programmed countdown and return to normal operation mode.

Note: "ON" means output is ON during countdown period. "OFF" means output is OFF during countdown period.

3.3 Manual Countdown Operation

To manually operate or interrupt the countdown function:

1. Sakatu DEL/CD button for more than 3 seconds to interrupt the countdown function. The display will flash. The output will maintain its current status until the next programmed command.
2. Sakatu DEL/CD again for more than 3 seconds to resume or re-interrupt the countdown.

Note: The function will switch ON (OFF) immediately once countdown ON (OFF) started and ON/OFF switched after countdown.

3.4 Ausazko funtzioa

This feature allows the timer to switch ON and OFF at random times, typically between 6:00 PM and 5:30 AM, to simulate occupancy. For example, it might switch ON randomly between 10 and 26 minutes, then OFF randomly between 20 and 43 minutes, and repeat.

1. When the display shows clock time, press the R button to activate the random function. The "R" icon will appear on the display.
2. Desaktibatzeko, sakatu tekla R button again. The "R" icon will disappear.

3.5 Manual Override Switch

The MODUA button allows you to manually override the programmed settings at any time:

• Sakatu MODUA modu hauetan zehar ziklatzeko:
  • **ON**: Always ON (Timer function disabled).
  • **OFF**: Always OFF (Timer function disabled).
  • **AUTO**: Automatic operation according to programmed settings.

3.6 Summer Time Setting (Daylight Saving)

To adjust for summer time:

1. Sakatu ERLOIA button for 3 seconds. The present time will increase by one hour, and the LCD will display the icon of 'S'.
2. To revert to standard time, press the ERLOIA button for 3 seconds again. The 'S' icon will disappear, and the time will go back one hour.

Figure 3: Detailed instructions and button functions (Part 1).

4. Mantentzea

• **Cleaning**: Wipe the timer with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
• **Battery**: The built-in Ni-MH rechargeable battery maintains program settings during power outages. It has a standby time of approximately 120 days. The battery recharges automatically when the timer is plugged into a live socket. No user maintenance is required for the battery.
• **Storage**: Store the timer in a cool, dry place when not in use for extended periods.

5. Arazoak

6. Erabiltzaileentzako aholkuak

• **Security**: Utilize the random ON/OFF function when you are away from home to give the impression that the house is occupied, enhancing security.
• **Irtenbideatages**: The built-in battery ensures your programs are saved during power interruptions, but it's good practice to check the time and program settings after a prolonged outage.
• **Appliance Compatibility**: Always verify that the power consumption of your appliance does not exceed the timer's maximum load rating (16A / 3680W) to prevent damage to both the timer and the appliance.

7. Maiz egiten diren galderak (FAQ)

Q: Is this timer switch a surge protector?

A: No, this device is a programmable timer switch designed to control the ON/OFF cycles of electrical appliances. It does not provide surge protection or act as a controller protector.

Q: Can I use this timer with any appliance?

A: You can use it with most appliances, provided their power consumption does not exceed 16A or 3680W. Always check the appliance's power rating before connecting.

G: Zer gertatzen da argindarra joaten bada?

A: The built-in Ni-MH rechargeable battery provides backup for your programmed settings for up to 120 days. The clock will continue to run, and programs will be retained. The battery recharges when the unit is plugged in.

8. Bermea eta Laguntza

For any issues or questions regarding your SINOTIMER Digital Programmable Timer Switch, please contact the seller or manufacturer's customer support. Keep your purchase receipt for warranty claims.