Flysky PL18EV Lite RC Transmitter and FGr12B Receiver User Manual

Segurtasun informazio garrantzitsua

WARNING: CHOKING HAZARD - Small parts. Not for Children under 3 years.

(Also applies to AVVERTENZA, AVERTISSEMENT, WARNUNG, OSTRZEZENIE in other languages)

Kutxan dagoena

• 1 x Flysky PL18EV Lite Transmitter
• 1 x Flysky FGr12B Receiver

Konfigurazioa

1. Charging Transmitter Battery

• The PL18EV Lite Transmitter has a 1S (3.7V) 4300mAh built-in battery. Fully charge it according to the included charging instructions.
• Charging is via Micro USB.
• Charging Time: Approximately 4 hours via 5V*2A Micro USB, or 7 hours via 5V*2A wireless charging (if supported).

2. Installing RC Model Batteries

• Fully charge your RC model's main battery.
• Install the charged battery into your RC model's battery compartment and secure the cover.

3. Initial Transmitter State

• Ensure the power switch on the PL18EV Lite Transmitter is in the "OFF" position before connecting or powering on any components.

4. Hartzailearen lotura

• The FGr12B Receiver is designed to work with transmitters supporting the AFHDS3 protocol (e.g., PL18, NB4, NB4 Lite). Refer to the specific binding instructions provided with your full product manual or the Flysky website for detailed steps on how to bind the receiver to the transmitter. This process typically involves putting both the receiver and transmitter into a binding mode.

Funtzionamendua

Pizteko/Itzaltzeko sekuentzia

1. To power on: First, turn on the PL18EV Lite Transmitter. Then, power on your RC model.
2. To power off: First, power off your RC model. Then, power off the PL18EV Lite Transmitter.

Oinarrizko Kontrolak

The PL18EV Lite is an 18-channel transmitter. Its joysticks, switches, and dials control various functions of your RC model. Familiarize yourself with the layout and assign functions as per your model's requirements. The 3.5-inch TFT display provides real-time information and allows for configuration of channels, mixing, and other advanced settings.

Mantentzea

Garbiketa

• Use a dry, soft cloth to wipe the exterior of the transmitter and receiver.
• Do not use water, solvents, or abrasive cleaners, as these can damage the electronic components and finish.

Ikuskapena

• Regularly inspect the joysticks, switches, and antenna on the transmitter for any signs of wear or damage.
• Inspect the receiver's antenna and connections for integrity.
• If your RC model has tracks or complex moving parts, inspect them regularly for debris and remove any dirt or obstructions to ensure smooth movement.

Biltegiratzea

• After use, ensure both the RC model and the remote control are powered off.
• Store the transmitter and receiver in a cool, dry place, away from direct sunlight, high temperatures, and humid environments.
• Mantendu produktua haurrengandik eta maskotengandik urrun.

Arazoak konpontzea

Argindarrik ez / Gailua ez da pizten

• Ensure the built-in battery of the PL18EV Lite Transmitter is fully charged. Connect it to a Micro USB power source and check the charging indicator.
• Verify that the power switch is correctly in the "ON" position.

Loss of Signal / Unresponsive Model

• Check the battery levels of both the transmitter and the RC model.
• Ensure the transmitter and receiver are properly bound. If not, refer to the binding instructions.
• Verify that you are within the specified remote control distance (>500m ground distance).
• Check for potential interference from other 2.4GHz devices or large metal objects in the operating area.
• Inspect the antennas on both the transmitter and receiver for damage.

Bistaratzeko arazoak

• If the HVGA 3.5 Inch TFT display is not functioning correctly, try restarting the transmitter.
• Ziurtatu gailua ez dagoela tenperatura altuen eraginpean.

Zehaztapenak

Flysky PL18EV Lite Transmitter

Flysky FGr12B Receiver

Erabiltzailearen aholkuak

• Hizkuntza ezarpenak: The PL18EV Lite transmitter features a 3.5-inch TFT display. If you need to change the display language, navigate through the system settings menu on the transmitter. Consult the full user manual for detailed instructions on accessing and modifying language preferences.

Bermea eta Laguntza

Erabiltzailearen eskuliburua (PDF)

A comprehensive user manual in PDF format is available for detailed instructions and advanced features. You can view or download it from the following link:

Flysky PL18EV Lite User Manual (PDF)

Bermearen informazioa

For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.

Laguntza Teknikoa

For technical assistance, firmware updates, or further inquiries, please visit the official Flysky webgunea edo jarri harremanetan haien bezeroarentzako arreta-kanalekin.