1. Sarrera
Thank you for choosing the ORICO RGB Light Hard Disk Docking Station. This device is designed to provide high-speed data transfer, convenient storage expansion, and an immersive experience for game enthusiasts. It supports 2.5/3.5-inch SATA HDDs and SSDs, offering a versatile solution for your data management needs. This manual will guide you through the setup, operation, and troubleshooting of your docking station.
2. Paketearen edukia
Irekitzean, egiaztatu paketearen edukia. Elementuren bat falta bada edo hondatuta badago, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin.
- ORICO Hard Disk Docking Station (1-bay or 2-bay, depending on model)
- Power Adapter (12V 2A for single-bay, 12V 3A for dual-bay)
- 2-in-1 USB C-to-C/A Data Cable (100 CM, supports PD60W)
- Instruction Book (this manual)
- Salmenta osteko txartela
3. Zehaztapenak
| Ezaugarri | Deskribapena |
|---|---|
| Produktuaren izena | 88-series Hard Drive Docking Station |
| Ereduak | 8818C3-BK (Single-bay), 8828C3-BK (Dual-Bays), 8828C3-C-BK (Dual-Bays with Offline Clone) |
| Bateragarritasuna | 2.5"/3.5" SATA HDD & SSD (Incompatible with IDE Hard Drives) |
| Kanpoko Interfazea | USB3.2 Gen2 C motakoa |
| Transmisio-tasa | Up to 10Gbps (Type-C Port & Cable), 6Gbps (SATA Port) |
| Max Support Capacity | 20TB (Single-bay), 40TB (Dual-bay) |
| Elikatze-moldagailua | 12V 2A (Single-bay), 12V 3A (Dual-bay) |
| Kablea | 100 CM 2-in-1 USB C-to-C/A (Supports PD60W) |
| Kasu Materiala | Plastikoa (ABS) |
| LED adierazlea | RGB Colorful Light (14 RGB modes including single color, flashing/breathing effects) |
| Beroaren xahupena | Open design for high efficiency |
| Dimensions (Single-bay) | 147 x 74 x 68 mm |
| Dimensions (Dual-bay) | 152.7 x 136 x 73.1 mm |
| Onartutako Sistemak | Windows, Mac OS, Linux (Backward compatible with Windows 10/9/8) |
| Ezaugarriak | Tool-free installation, Auto-Sleep, Offline Clone (8828C3-C model only), Dust-proof Baffles, Anti-slip Pads |
4. Konfigurazio gida
4.1. Disko gogorrak instalatzea
- Ziurtatu kargatzeko estazioa itzalita eta ordenagailutik deskonektatuta dagoela.
- Gently insert your 2.5-inch or 3.5-inch SATA HDD/SSD into the appropriate slot(s) until it is firmly seated. The docking station features dust-proof baffles to protect the slots.
- Ensure the drive is correctly aligned with the SATA connector inside the slot.
4.2. Connecting to a Computer/Device
- Connect the provided 2-in-1 USB C-to-C/A Data Cable to the Type-C port on the docking station.
- Connect the other end of the cable to an available USB-C or USB-A port on your computer, laptop, smart TV, PS4/PS5, or smart router.
- Konektatu korronte-egokitzailea kargatzeko estaziora eta entxufe batera.
- Turn on the power switch on the docking station. The RGB lights will illuminate.
5. Funtzionamendua
5.1. Oinarrizko Erabilera
- Once connected, your operating system should automatically detect the installed hard drive(s).
- You can access the drive(s) like any other external storage device.
- The docking station supports Plug & Play. However, for safe removal, always eject the drive(s) from your operating system before powering off the docking station or physically removing the drives.
5.2. RGB argiztapen moduak
The docking station features 14 RGB lighting modes, including single-color, flashing, and breathing effects, to enhance your gaming or workspace ambiance. The central button on the front of the device controls the RGB lighting. Press it to cycle through different modes.
5.3. Offline Clone Function (Model 8828C3-C only)
The offline clone function allows you to duplicate data from one hard drive to another without needing a computer connection.
- Insert the disks: Ensure the docking station is disconnected from the computer and powered off. Insert the source disk (Disk A) into the 'Source' slot and the target disk (Disk B) into the 'Target' slot.
- Konektatu potentzia: Switch the button at the back of the docking station to 'Clone' mode. Then, turn on the power.
- Start cloning: Press the 'Start' button at the back of the docking station. The indicator light will flash during the cloning process. Once cloning is complete, the indicator light will remain constantly on.
Important Notes for Offline Clone:
- The target drive (Disk B) must have a capacity equal to or larger than the source drive (Disk A).
- Do not move or remove disks during the cloning process.
- Ensure the docking station is not connected to a computer during offline cloning.
- After cloning, the target disk may need to be activated in your computer's Disk Management (PC Management > Disk Management > Online).
- The approximate offline clone speed is 500GB per 2 hours.
6. Bateragarritasuna
The ORICO docking station is broadly compatible with various devices and operating systems:
- Hard Drive Types: 2.5-inch and 3.5-inch SATA I/II/III HDDs and SSDs.
- Sistema eragileak: Windows (including Windows 10/9/8), Mac OS, and Linux systems.
- Gailuak: PC, Laptops, Smart TVs, PS4/PS5 consoles, Smart Routers, and OTG-enabled mobile phones (with appropriate adapter).
7. Mantentzea
- Keep the docking station in a clean, dry environment.
- Saihestu gailua muturreko tenperaturetara edo eguzki-argitara zuzenean jarri.
- Garbitu kanpoaldea zapi leun eta lehor batekin. Ez erabili garbitzaile likidorik.
- Ensure proper ventilation around the device to maintain optimal heat dissipation.
- Always safely eject hard drives from your operating system before removing them from the docking station or powering off the device.
8. Arazoak
- Q: Why can't the PC recognize the HDD/SSD?
- A: First, verify that your hard drive is functional by testing it in another enclosure or directly connecting it to a computer. Try using a different hard drive in the docking station. If the issue persists, ensure all cables are securely connected and the power adapter is providing sufficient power. If the problem continues, contact customer service.
- Q: The transfer speed is not reaching 10Gbps.
- A: The 10Gbps is the theoretical maximum transmission speed for USB 3.2 Gen2. Actual speeds can vary depending on several factors, including the hard drive's speed, your computer's USB port capabilities, the operating system, and other system overhead. Ensure you are using a USB 3.2 Gen2 compatible port and a high-speed hard drive for optimal performance.
- Q: Is the docking station compatible with Windows, Mac OS, and Linux systems?
- A: Yes, the docking station is compatible with Windows (including Windows 10/9/8), Mac OS, and Linux operating systems.
- Q: Which brands of SSD/HDD are supported?
- A: The docking station supports various brands of 2.5-inch and 3.5-inch SATA HDDs/SSDs, including but not limited to Seagate, Toshiba, Western Digital, Samsung, and Hitachi.
9. Erabiltzaileentzako aholkuak
- Disk Insertion: Always ensure hard drives are inserted firmly and correctly into the slots to avoid connection issues.
- Offline Clone Preparation: Before initiating an offline clone, double-check that the target drive has sufficient capacity (equal to or greater than the source drive) to prevent data loss or incomplete cloning.
- Activating Cloned Drives: If a newly cloned drive is not immediately visible on your computer, remember to activate it via Disk Management (PC Management > Disk Management > Online) in Windows.
- Kanporaketa segurua: To prevent data corruption, always use the 'Safely Remove Hardware' option in your operating system before disconnecting the docking station or removing hard drives.
- Elikatze-iturria: Use the correct power adapter (12V 2A for single-bay, 12V 3A for dual-bay) to ensure stable operation and data integrity.
10. Bermea eta Laguntza
ORICO products come with a standard manufacturer's warranty. Please refer to the After Sales Card included in your package for specific warranty terms and conditions. For technical support, product inquiries, or warranty claims, please contact ORICO customer service through their official website or the contact information provided on your After Sales Card.
Oharra: Keep your purchase receipt and After Sales Card as proof of purchase for warranty services.
