LAUNCH X-431 Creader Elite V2.0 For HONDA User Manual

1. Sarrera

The LAUNCH X-431 Creader Elite V2.0 is a professional diagnostic tool designed to provide comprehensive system diagnostics for Honda and Acura vehicles. This manual provides detailed instructions on how to set up, operate, and maintain your device, ensuring optimal performance and longevity.

Ezaugarri nagusiak hauek dira:

• Full System Diagnostics for Honda/Acura/Dongfeng Honda/GAC Honda.
• Bi-directional Control (Active Test) for component testing.
• All Free Reset Functions (e.g., ABS Bleeding, Oil Reset, SAS Reset, Injector Coding, TPMS Reset, EPB Reset, Gear Learning, Throttle Calibration, AFS Reset, Sunroof Initialization, DPF Regeneration, Battery Matching, etc.).
• Full 10 OBD2 Functions for all OBD-II compliant vehicles.
• Auto VIN Scan for quick vehicle identification.
• Lifetime Free Software Updates via Wi-Fi.
• Android 8.1 OS, 4-inch Touchscreen, 2GB RAM, 16GB Storage, 3000mAh Battery.
• Multi-language support: English, French, Spanish, German, Russian, Italian, Portuguese, Japanese, Korean, Polish, Traditional Chinese.

2. Segurtasun-neurriak eta abisuak

To prevent personal injury or damage to vehicles and/or the tool, read this user manual carefully and observe the following safety precautions at a minimum whenever working on a vehicle:

• Inoiz ez erabili tresna hau diseinatu den aplikaziorako.
• Inoiz ez aldatu edo aldatu tresna hau inola ere. Erremintaren funtzionamendu eta/edo mantentze desegokiak edo tresna aldatzeak lesio larriak edo heriotza eragin ditzake.
• Ez dago erabiltzaileak zaintzeko piezarik. Gailua konponketa-pertsona kualifikatu baten esku utzi ordezko pieza berdinak soilik erabiliz. Horrek gailuaren segurtasuna mantenduko dela bermatuko du. Gailua desmuntatzeak berme eskubidea baliogabetuko du.
• Kontuz: This tool contains an internal Lithium Polymer battery. The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush, pierce or dispose of the battery in fire or water.
• Produktu hau ez da jostailu bat. Ez utzi haurrei elementu honekin edo gertu jolasten.
• Ez jarri gailua euria edo hezetasunera.
• Ez jarri gailua gainazal ezegonkorren gainean.
• Ez utzi inoiz gailua arretarik gabe kargatzeko prozesuan. Gailua sukoia ez den gainazal batean jarri behar da kargatzean.
• Maneatu gailua kontu handiz. Gailua erortzen bada, egiaztatu hausturarik dagoen eta funtzionamenduan eragina izan dezakeen beste edozein baldintza.
• Ez erabili tresna atmosfera lehergarrietan, adibidez, likido sukoiak, gasak edo hauts astunak daudenean.
• Keep the tool dry, clean, and free of oil, water or grease. Use a mild detergent on a clean cloth to clean the enclosure of the device when necessary.
• Taupada-markagailuak dituzten pertsonek medikuarekin kontsultatu behar dute erabili aurretik. Bihotzeko taupada-markagailutik hurbil dauden eremu elektromagnetikoek taupada-markagailuen interferentziak edo taupada-markagailuen hutsegiteak eragin ditzakete.
• Egin beti automobilen probak ingurune seguru batean.
• Ez saiatu tresna erabiltzen edo behatzen ibilgailua gidatzen duzun bitartean. Tresna erabiltzeak edo behatzeak gidariaren distrakzioa eragingo du eta istripu hilgarria sor dezake.
• Jantzi ANSI arauak betetzen dituen segurtasun-babesa.
• Keep clothing, hair, hands, tools, test equipment, and other objects away from all moving or hot engine parts.
• Erabili ibilgailua ondo aireztatutako lan-eremu batean. Ihes-gasak pozoitsuak dira.
• Chock the drive wheels and never leave the vehicle unattended while running tests.
• Kontuz ibili pizte-bobinaren, banatzailearen txanoaren, pizte-kableen eta bujien inguruan lan egiten duzunean. Osagai hauek bolumen arriskutsuak sortzen dituztetages motorra martxan dagoenean.
• Jarri transmisioa P (A / T-rako) edo N-n (M / T-rako) eta ziurtatu aparkatzeko balazta aktibatuta dagoela.
• Keep a fire extinguisher suitable for gasoline, chemical, and electrical fires within the work area.
• Don't connect or disconnect any test equipment while the ignition is on or the engine is running.

3. Konfigurazioa

3.1 Osagaiak eta kontrolak

Familiarize yourself with the main components and controls of the LAUNCH X-431 Creader Elite V2.0:

1. Kargatzeko ataka (C motakoa): Connects the charging cable to power the tool.
2. Diagnostic Connector (DB-15): Connects to the vehicle's Data Link Connector (DLC) using the diagnostic cable.
3. Pizteko botoia: Turns the tool on or off.
4. Ukipen-pantaila: Displays test results and user interface.
5. Atzera botoia: Exits the current screen or returns to the previous screen.
6. Hasierako botoia: Navigates to the main menu screen.
7. Ezarpenen botoia: Quick access to the settings module.

3.2 Powering Up the Tool

The tool can receive power via two methods:

1. Kargatzeko kablearen bidez: Plug one end of the included Type-C charging cable into the tool's charging port and the other end into an external power supply device.
2. Diagnostikoaren kablearen bidez: Insert one end of the diagnostic cable into the DB-15 connector of the tool, and the other end into the vehicle's DLC.

Kargatzeko LEDa berde iraunkorra pizten denean, bateria guztiz kargatuta dagoela adierazten du.

3.3 Initial Setup (Getting Started)

For first-time use, follow these steps to configure system settings and update diagnostic software:

1. Sakatu Pizteko botoia to turn on the tool.
2. On the welcome page, tap Hasi aurrera egiteko.
3. Choose your desired system language and tap Hurrengo urratsa.
4. Select your time zone and tap Hurrengo urratsa to enter the WLAN setup screen.
5. Slide the Wi-Fi switch to ON. The system will search for available wireless networks.
   • If the network is open, you can connect directly.
   • If the network is encrypted, enter the security key (password).
6. After connecting to Wi-Fi, tap Hurrengo urratsa to configure workshop information. Input the required details and tap Hurrengo urratsa.

   Note: Configured workshop information will be appended to every diagnostic report generated.

7. Carefully read the user agreement. Check the box next to Agree to all the above terms, eta sakatu OK to complete the sign-up process and navigate to the Main Menu.

Note: To enjoy more capabilities and better service, it is strongly recommended to update the tool on a regular basis.

3.4 Ibilgailura konektatzea

1. Turn the vehicle's ignition off.
2. Locate the vehicle's 16-pin Data Link Connector (DLC).

   

   The DLC is typically located 12 inches from the center of the instrument panel, under or around the driver's side for most vehicles. For some vehicles with special designs, the DLC location may vary. Refer to your vehicle's service manual if you cannot find it.

   

3. Plug one end of the diagnostic cable into the vehicle's DLC, and the other end to the DB-15 diagnostic connector of the tool. Tighten the captive screws.
   • A plastic DLC cover may be found on some vehicles; remove it before plugging in the cable.
   • The cable connector is keyed and will only fit one way. If you have problems connecting, rotate the connector 180° and try again.
4. Piztu piztea. Motorra itzalita edo martxan egon daiteke.

4. Funtzionamendu-argibideak

4.1 Menu nagusia amaituview

The main menu provides access to the following function modules:

• Local Diagnose: Configures the tool for professional diagnostic operations.
• OBD II: Quick access to check for DTCs, isolate MIL causes, check monitor status, verify repairs, and perform emission-related services.
• Service Function: Offers coding, reset, relearn, and other service functions.
• Software eguneratzea: Updates vehicle diagnostic software and APK.
• Mall: Subscribes to additional vehicle diagnostic or service software.
• Gehiago: Includes Launch Academy, Online Service, Know Your Customer, Toolbox (Diagnostic Software Clear, Firmware Fix, DTC Library, Diagnostic Record, DLC Lookup, Image), and Mine (My Report, My Order, Settings).

4.2 Ibilgailuen diagnostikoak

This function is designed to diagnose electronic control systems of a single vehicle model, providing comprehensive full-system code coverage and special test functions.

4.2.1 Smart Diagnostics (Auto-Detect)

This function quickly accesses vehicle electronic control systems by decoding the Vehicle Identification Number (VIN), eliminating manual menu selection. Ensure "Automatic detection on connect" is ON in Settings. After connection and ignition ON, the system enters auto-detect mode.

1. Once VIN information is successfully obtained, confirm it and tap OK to start diagnosing all available systems. A diagnostic report will be automatically generated.
2. If VIN access fails, a screen will appear for manual VIN input. Input the VIN and tap OK.

Note: The VIN is usually a 17-character string of uppercase letters and numbers (excluding Q, I, O) found on the dashboard, driver's door, or firewall.

4.2.2 Manual Diagnostics

If Auto-Detect fails, you can perform vehicle diagnosis manually. Ensure the corresponding vehicle manufacturer software is installed. The diagnostic menu varies by vehicle make, model, and year.

Jarraitu urrats orokor hauek:

1. Hautatu Tokiko diagnostikoa.
2. Hautatu Ibilgailuen fabrikatzailea.
3. Hautatu Ibilgailuen eredua.
4. Hautatu Eskaneatze modua (Automatic System Detection or Manual System Detection).
5. Hautatu Test funtzioa (e.g., Read Version Information, Read Fault Code, Clear Fault Code, Read Data Stream, Special Function).

4.2.3 Osasun txostena (proba azkarra)

This function quickly accesses all electronic control units and generates a detailed report on vehicle health. Tap Osasun Txostena on the test item selection screen to scan ECUs. Fault codes are marked with a red cross, and working systems with a green tick.

• Txostena: Saves the diagnostic result. Access reports via More -> Mine -> My Report.
• Garbitu kodea: Clears existing diagnostic trouble codes.

4.2.4 Read Fault Code (DTCs)

Displays detailed information of Diagnostic Trouble Codes (DTCs) retrieved from the vehicle's control system. DTCs are five-digit alphanumeric codes indicating a problem area. The first character identifies the main system (B=Body, C=Chassis, P=Powertrain, U=Network), the second indicates code type (0=Generic, 1=Manufacturer Specific), the third identifies the specific system/sub-system, and the fourth/fifth identify the malfunctioning section.

• Laguntza: View DTC help information.
• Kode bilaketa: Bilatu more information about the current DTC online.
• Txostena: Save current data in text format.

Note: Never replace parts based solely on DTCs. Consult the vehicle's service manual for proper testing procedures.

4.2.5 Garbitu matxura kodea

Erases codes from the vehicle after repairs. Ensure the ignition key is ON and the engine is OFF before performing this function. Clearing DTCs does not fix underlying problems; if repairs are not made, codes will reappear.

4.2.6 Irakurri Datu-korrontea

Retrieves and displays live data and parameters from the vehicle's ECU. Data can be viewed in text (list), waveform graphs, or combined graphs for comparison. Tap Hautatu Guztiak or select specific items, then OK to view. Values outside the standard range will display in red.

• Grafikoa: Displays parameters in waveform graphs.
• Konbinatu: Merges graphs for data comparison.
• Erregistroa: Records diagnostic data for troubleshooting. Access records via More -> Toolbox -> Diagnostic Record.

4.2.7 Actuation Test (Bi-directional Control)

Accesses vehicle-specific subsystem and component tests. The tool sends commands to the ECU to drive actuators (e.g., cycling A/C, fuel pump, parking brake test, oil pressure control, engine compartment fan) and determines system integrity by reading ECU data or monitoring actuator operation. Follow on-screen instructions.

Note: Function menu varies by vehicle make, model, and year. Ensure components are correctly installed before testing.

4.2.8 Special Function (All Maintenance Service Functions)

Offers coding, reset, and relearn functions to restore vehicle systems after repair or replacement. Available tests vary by vehicle. These functions are free and do not require additional purchases in the Mall.

Examples of supported functions include:

• ABS odoljarioa
• Olioa Lamp Berrezarri
• SAS Berrezarri (Gidatze-angeluaren sentsorea)
• Injector Reset (Injector Coding)
• TPMS Berrezarri (Pneumatikoen Presioaren Jarraipen Sistema)
• EPB Berrezarri (Aparkaleku Balazta Elektronikoa)
• Engranaje Ikaskuntza
• Ahotsaren Kalibrazioa
• AFS Reset (Adaptive Front-lighting System)
• Sunteofaren hasieratzea
• DPF Birsorkuntza (Diesel Partikula Iragazkia)
• Bateriaren parekatzea
• Eserlekuaren Kalibrazioa
• Door Window Calibration
• Transmission Adaption Learn
• SRS Reset (Supplemental Restraint System)
• Eta beste asko.

Sartzeko: Select Diagnose > Select Car Model, Year > Run Autovin > Select Module > Special Functions!

4.3 OBDII Diagnostics (Generic OBD-II Functions)

This scanner supports all 10 test modes for OBD-II compliant cars, essential for daily repair work.

1. Kodeak irakurtzea: Diagnostiko Arazo Kodeen (DTC) deskribapen zehatzak erakusten ditu.
2. Erasing Kodeak eta Berrezarri: Turns off Check Engine Light (MIL), clears codes, and resets monitors.
3. Datu korrontea: Reads and displays live ECU/PCM data stream, with graphical plotting.
4. I/M Prestutasun Egoera: Shows if emission-related systems are operating properly and ready for inspection.
5. Irakurri zuzeneko datu-jarioa: Displays continuous data stream in live graphic (waveform) display.
6. View Izoztu fotograma datuak: Shows vehicle conditions recorded when an emission-related fault occurs.
7. O2 sentsoreen proba: O2 sentsorearen monitorearen proben emaitzak berreskuratu eta bistaratzen ditu.
8. Monitorearen proba barnean: Isurketarekin lotutako potentzia-trenaren osagaien proben emaitzak berreskuratu eta bistaratzen ditu.
9. Irakurri ibilgailuaren informazioa: VIN, CID (kalibrazio IDa) eta CVN (kalibrazio egiaztapen zenbakia) bistaratzen ditu.
10. Osagaien proba: Eskanerraren aginduen bidez ibilgailuaren zenbait osagai aktibatzen ditu funtzionamendua probatzeko.

4.4 Historia

The tool records every diagnostic session. The History function provides direct access to previously tested vehicles, allowing you to resume operations or view past reports. Tap Historia on the Local Diagnose screen to see records by date.

• Tap a vehicle model to view its last diagnostic report.
• To delete history, select items and tap Ezabatu. Erabili Hautatu Guztiak to delete all records.
• Sakatu Sarbide azkarra to navigate directly to the function selection page of the last diagnostic operation.

5. Mantentzea

5.1 Software eguneratzea

All diagnostic software is updated periodically. It is recommended to update and install the latest software version for the best service, functions, and experience. Pre-installed diagnostic software updates are free for life. Software subscribed in the Mall is free for one year; re-subscribe after expiration.

To update: Tap Software eguneratzea on the main menu. Select target software and tap Eguneratu. Ensure a stable network connection. Software packages will install automatically after download.

5.2 Diagnostikoko softwarea Garbitu

This function allows you to delete diagnostic software that is not frequently used, freeing up storage space.

5.3 Firmwarearen konponketa

Use this module to upgrade and fix diagnostic firmware. Do not cut power or switch to other interfaces during the fixing process.

5.4 Garbiketa

This option allows you to clear cache files and free up storage space on the device.

6. Arazoak

6.1 DTC Liburutegia

This option allows you to retrieve detailed descriptions of specific Diagnostic Trouble Codes (DTCs) from the built-in database. This helps in understanding the meaning of fault codes without external resources.

6.2 Iritzia

If you encounter diagnostic problems that require further analysis, use the Feedback module to send details to the service team for troubleshooting assistance.

6.3 FAQ (Frequently Asked Questions)

This module provides answers to common questions related to the tool's operation and features.

6.4 Berreskuratzea

This option allows you to reset the tool to its default factory settings. Be aware that resetting may cause data loss, so proceed with caution.

7. Zehaztapenak

7.1 Enbalatzeko zerrenda

Produktuen paketeak honako elementu hauek ditu:

• 1pc * Main Unit (Diagnostic tool)
• 1pc * OBD2 Cable (Detachable)
• 1pc * User Manual
• 1pc * Quick Start Guide
• 1pc * GPSR safety warning

8. Bermea eta laguntza

8.1 Bermearen informazioa

LAUNCH electronic products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user. This warranty does not cover parts that have been abused, altered, used for unintended purposes, or used inconsistently with instructions. The exclusive remedy for any defective automotive meter is repair or replacement. LAUNCH is not liable for any consequential or incidental damages.

Final determination of defects is made by LAUNCH. No agent, employee, or representative of LAUNCH has authority to bind LAUNCH to any affirmation, representation, or warranty concerning LAUNCH automotive meters, except as stated herein.

The product also comes with a 5-year warranty as stated in the product description.

8.2 Customer Service & Technical Support

For questions on operation or technical issues, contact the seller or LAUNCH TECH Service Center:

• Webgunea: https://en.cnlaunch.com
• Telefonoa: +86 755 8455 7891
• Posta elektronikoa: overseas.service@cnlaunch.com

When providing feedback, clearly state the Serie zenbakia of your product for quick and efficient problem resolution.

8.3 Lineako Zerbitzua

The tool includes an "Online Service" module where you can contact service staff for immediate technical support directly through the device.

8.4 Launch Academy

Access the "Launch Academy" module for abundant repair cases, operation skills, and training videos for quick reference and learning.

9. Erabiltzaileentzako aholkuak

• Ibilgailuen bateragarritasuna: Erosketa aurretikasing or performing diagnostics, it is highly recommended to verify compatibility with your specific vehicle model and year. If unsure, contact customer support with your car's VIN.
• Free Special Functions: All special features and reset functions are included for free; there is no need to purchase additional special features in the Mall for Honda/Acura vehicles.
• Active Test Usage: When performing active tests (bi-directional control), ensure that the components being tested are correctly installed to prevent damage or inaccurate results.
• Diagnostic Report Management: Utilize the screenshot and screen recorder features to save diagnostic data. Diagnostic reports can be easily printed by scanning the QR code to share them first.
• Software eguneraketak: Regularly update the diagnostic software via Wi-Fi to ensure you have the latest features, vehicle coverage, and bug fixes for optimal performance.