INKBIRD IIC-400-WIFI Smart Indoor Sprinkler Controller User Manual

1. Sarrera

The INKBIRD IIC-400-WIFI Smart Indoor Sprinkler Controller is designed to provide intelligent and efficient watering for your garden or lawn. With Wi-Fi connectivity, you can control and monitor your irrigation system remotely via a smartphone application. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure optimal performance of your device.

2. What You Will Get

Upon unboxing your INKBIRD IIC-400-WIFI Smart Sprinkler Controller, you should find the following items:

• Protective Face Plate
• Smart Sprinkler Controller Unit
• 3x Screws with Anchors for mounting
• Elikatze-moldagailua
• Bihurkin
• 4x Threaded Wiring Connectors

3. Behar izango dituzun tresnak

Before beginning the installation, ensure you have the following tools and access:

• 2.4GHz Wi-Fi Access
• Smartphone or Tablet (iOS 13/Android 7.1 or later)
• Bihurkin (barne)
• Mailua
• Zulagailu elektrikoa

4. Zehaztapenak

4.1. Zehaztapen elektrikoak

4.2. App Installation Requirements

• iOS edo Android gailu bateragarria (iOS 13/Android 7.1 eta berriagoak)
• 2.4 GHz-ko haririk gabeko sareko seinalea instalatzeko tokian eskuragarri
• WEP/WPA/WPA2/WPA2 PSK(AES) segurtasun moduak onartzen ditu

4.3. Produktuaren neurriak

• Controller Size: 6.11inch*4.67inch*1.45inch / 155.2mm*118.5mm*36.9mm
• Produktuaren pisua: 224g / 7.9oz

5. Produktuen diagrama

The INKBIRD IIC-400-WIFI controller features a clear layout for easy identification of components and wiring terminals.

5.1. LED adierazle argia

• Zone 1~4 indicator lights: Stays on when watering is in progress; Flashes when watering is paused; Flashes in turn when soaking is in progress. Flashes simultaneously when no schedules are running; All off when the controller shuts down.
• All indicator lights: Always on and the buzzer beeps once per second to indicate that the device time has been reset. Wi-Fi needs to be re-paired to calibrate the device time.
• Delay indicator light: Stays on when rain, freezing weather, or manual skips are detected; Schedules with these features enabled will be delayed.
• Wi-Fi indicator light: Flashes when in pairing mode; Stays on when connected and online.

5.2. Eragiketa-botoiak

• Wi-Fi botoia: Luze sakatu 2 segundoz parekatzeko moduan sartzeko.
• EZAR botoia: Used for settings adjustments.
• Start/Skip Button: Press and hold for 2 seconds to turn the controller on/off.

5.3. Wiring Terminals

The controller features clearly labeled terminals for various connections:

• C (Common): For common wires.
• M (Master Valve/Pump Start Relay): For master valve or pump start relay wires.
• 1, 2, 3, 4 (Zone Outputs): For individual zone wires.
• S (Rain Sensor): For rain sensor wires.
• 24 VAC: For 24V AC power connections.
• PWR IN: Energia sarrerako ataka.

6. Instalazio urratsak

Before installation, ensure the device can connect to Wi-Fi without issues.

6.1. Step 1: Download the APP

Bilatu “INKBIRD” in your device's App Store (iOS) or Google Play (Android) to download and install the application. Create an account once the app is installed.

Alternatively, you can scan the QR code below to download the app:

6.2. Step 2: Connect to Wi-Fi

1. Plug the device into a power socket. The LED light will fully illuminate for one second.
2. After 5 seconds, the Wi-Fi indicator light will flash, indicating that the device has entered Wi-Fi connection state. If it does not flash, press and hold the Wi-Fi button for two seconds to reset the Wi-Fi connection.
3. Open the INKBIRD app, click “+” in the top right corner, and follow the in-app instructions to complete the Wi-Fi connection. Note that this controller supports 2.4GHz Wi-Fi networks only.
4. Once successfully connected, the Wi-Fi indicator on the controller will remain on.

6.3. Step 3: Remove Your Old Controller

1. First, test your existing sprinkler system to ensure all sprinklers are working correctly.
2. Label each wire from your old controller using the provided label stickers to avoid confusion during re-installation.

6.4. Step 4: Mark Screw Locations

1. Ensure the distance between the new controller and the power socket is less than 6 feet (1.8 meters).
2. Use the mounting template (if provided, or measure the controller) to mark the installation location on the wall.
3. Drill holes at the marked locations using an electric drill.
4. Insert the screw anchors into the drilled holes using a hammer.

6.5. Step 5: Install Your New Controller

1. Secure the top screw, leaving enough space between the screw head and the wall for the controller to hang.
2. Hang the new controller onto the top screw.
3. Secure the controller with two additional screws at the bottom.

6.6. Step 6: Wire Connection

Insert the labeled wires into the appropriate terminals on the new controller.

1. Common Wires (C): Insert common wires (usually labeled 'C') into any of the 'C' terminals.
2. Master Valve / Pump Start Relay (M): If you have a master valve or pump start relay (wires usually labeled 'M' or 'Pump'), wire it into the 'M' terminal. Oharra: The pump should never be wired directly to the controller; doing so will damage the controller and void your warranty.
3. Zone Wires (1~4): Insert the wires corresponding to your landscape's zones into terminals 1 through 4.
4. Rain Sensor (S) (Optional): If you are using a rain sensor (wires usually labeled 'S'), wire it into the 'S' and '24-' terminals. The '24-' terminal is equivalent to the 'C' terminal. Remember to enable the rain sensor in the app.
5. Power-in (P): Insert the power connector upwards into the power jack, then plug the adapter into a power outlet. Oharra: Do not turn on the power before all wires are securely connected. If any wire is damaged, cut off power to the controller and replace the damaged wire to avoid hazards.

7. Operation (Function Description)

The INKBIRD app provides comprehensive control over your sprinkler system.

7.1. Automatic/Manual Watering

• Modu automatikoa: Makes daily watering visible, efficient, and scientific.
• Eskuzko ureztatzea: Allows you to provide extra water as needed. The default manual watering time on the device is 180 minutes.

7.2. Smart Irrigation Features

• Rain Skip: Intelligently skips watering schedules during rainy weather to prevent overwatering.
• Urtaroen doikuntza: Adjusts watering amounts for hot summers or cold winters with a single click.

7.3. Managing Watering Schedules and History

Aplikazioak aukera ematen dizu view upcoming watering plans and review past watering activities.

7.4. Itzaltzeko memoria funtzioa

The controller has a built-in time chip that automatically runs the time without needing spare batteries. It supports non-volatile storage, saving all settings even if power is cut off. The timer will automatically resume once power is restored.

7.5. OTA Function

The device supports Over-The-Air (OTA) updates, ensuring lifetime satisfactory use with continuous improvements.

8. Arazoak konpontzeko gida

If you encounter issues with Wi-Fi connection or irrigation facilities, refer to the table below for common problems and solutions. For further assistance, please contact support@inkbird.com.

9. Mantentzea

To ensure the longevity and optimal performance of your INKBIRD IIC-400-WIFI Smart Sprinkler Controller, follow these simple maintenance guidelines:

• Keep the controller clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Ensure the controller is installed in a dry location, as it is not waterproof.
• Aldian-aldian egiaztatu kableatu-konexio guztiak ondo finkatuta daudela eta korrosiorik edo kalterik ez dutela ziurtatzeko.
• Regularly check for app updates to benefit from new features and performance improvements.

10. Erabiltzaileentzako aholkuak

Ez dago erabiltzaileentzako aholku zehatzik re-tikviews or Q&A were provided for this product.

11. Bermea eta Laguntza

11.1. Bermea

This item carries a 2-year warranty against defects in components or workmanship. During this period, products found to be defective will be repaired or replaced without charge, at the discretion of INKBIRD.

11.2. Bezeroarentzako arreta

For any problems or questions regarding the use of your INKBIRD IIC-400-WIFI Smart Sprinkler Controller, please feel free to contact us at support@inkbird.com. We are committed to providing the best possible assistance.

Erabiltzailearen eskuliburu zehatza PDF formatuan ere deskargatu daiteke: INKBIRD IIC-400-WIFI User Manual (PDF)

12. FCC eskakizuna

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. Baliteke gailu honek ez du interferentzia kaltegarririk eragin.
2. Gailu honek jasotako edozein interferentzia onartu behar du, nahi ez den funtzionamendua eragin dezakeen interferentziak barne.

Oharra: Ekipo hau probatu egin da eta B Klaseko gailu digital baten mugak betetzen dituela ikusi da, FCC Arauetako 15. zatiaren arabera. Muga hauek etxebizitza-instalazio batean interferentzia kaltegarrien aurka arrazoizko babesa emateko diseinatuta daude. Ekipo honek irrati-maiztasun-energia sortzen, erabiltzen eta igor dezake, eta argibideen arabera instalatu eta erabiltzen ez bada, interferentzia kaltegarriak sor ditzake irrati-komunikazioetan. Dena den, ez dago bermatzen instalazio jakin batean interferentziarik gertatuko ez denik. Ekipo honek irrati- edo telebista-harreran interferentzia kaltegarriak eragiten baditu, eta hori ekipoa itzali eta piztuz jakin daiteke, erabiltzaileari gomendatzen zaio interferentziak zuzentzen saiatzea, neurri hauetako bat edo gehiago erabiliz:

• Berbideratu edo lekuz aldatu antena hartzailea.
• Handitu ekipoaren eta hargailuaren arteko bereizketa.
• Konektatu ekipoa hargailua konektatuta dagoen zirkuitu desberdineko entxufe batera.
• Kontsultatu banatzaileari edo irrati/telebistako teknikari esperientziadun bati laguntza lortzeko.

Ekipo honek kontrolatu gabeko ingurune baterako ezarritako FCC erradiazioaren esposizio-mugak betetzen ditu. Ekipo hau erradiadorearen eta gorputzaren artean gutxienez 20 cm-ko distantziara instalatu eta funtzionatu behar da. Transmisore hau ez da egon behar beste antena edo transmisore batekin batera kokatuta edo funtzionatu behar.