Antec FLUX SE MESH BTF Mid Tower Case

Sarrera

Thank you for choosing the Antec FLUX SE MESH BTF Mid Tower Case. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your new PC case. Please read this manual carefully before beginning your build to ensure proper installation and optimal performance.

Konfigurazioa eta Instalazioa

Before starting, ensure you have all necessary components and tools. Always handle components with care and consider using an anti-static wrist strap.

1. Kasua prestatzea

1. Kendu alboko panelak: Carefully remove the tempered glass side panel and the steel side panel by unscrewing the thumbscrews at the rear of the case.
2. Access Front Panel: The front mesh panel can be detached for easier access to front fan mounts and dust filter cleaning.
3. Osagaiak identifikatzea: Familiarize yourself with the internal layout, including motherboard tray, drive bays, and fan mounts.

2. Plaka amaren instalazioa

1. Install the CPU, CPU cooler (if air cooler), and RAM onto your motherboard before placing it in the case.
2. Align the motherboard with the standoffs in the case. The case supports ATX, Micro-ATX, and Mini-ITX motherboards.
3. Lotu plaka nagusia emandako torlojuekin.

3. Elikatze-iturriaren (PSU) instalazioa

1. Mount your ATX power supply into the PSU shroud area at the bottom rear of the case.
2. Lotu PSUa kaxaren atzealdeko torlojuekin.

4. Biltegiratze unitatearen instalazioa

• 3.5 hazbeteko HDDak: Install 3.5" hard drives into the dedicated drive cage located under the PSU shroud.
• 2.5 hazbeteko SSDak: Mount 2.5" SSDs to the dedicated brackets behind the motherboard tray or on top of the PSU shroud.

5. Txartel grafikoaren (GPU) instalazioa

1. Kendu beharrezko hedapen-zirrikituen estalkiak kaxaren atzealdean.
2. Insert your graphics card into the PCIe slot on the motherboard and secure it with screws.

6. Haizagailuaren eta erradiadorearen instalazioa

The case offers extensive cooling options:

• Aurrealdea: Supports up to 3 x 120mm or 2 x 140mm fans, or radiators up to 360mm.
• Goia: Supports up to 2 x 120mm or 2 x 140mm fans, or radiators up to 280mm.
• Atzekoa: Supports 1 x 120mm fan or 120mm radiator.
• PSU estalkia: 2 x 120 mm-ko haizagailu onartzen ditu.

7. Kableen kudeaketa

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables for improved airflow and aesthetics.

8. Connecting Front I/O

Connect the front panel cables (USB 3.0, USB 2.0, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

Zure ordenagailuaren kaxa erabiltzea

Once all components are installed and cables are connected, replace the side panels. Power on your system using the power button on the front I/O panel. The mesh design ensures optimal airflow for cooling your components.

Aurrealdeko I/O atakak:

• Pizteko botoia: To turn the system on/off.
• Berrezarri botoia: Sistema berrabiarazteko.
• USB 3.0 portuak: Abiadura handiko datuak transferitzeko.
• USB 2.0 ataka: USB gailu estandarretarako.
• HD audio-konektoreak: Entzungailuetarako eta mikrofonorako.

Mantentzea

Mantentze-lan erregularrak zure ordenagailuaren osagaien errendimendu optimoa eta iraupena bermatzen laguntzen du.

• Hauts-iragazkiak: The case features removable dust filters on the front, top, and bottom (PSU intake). Regularly remove and clean these filters with compressed air or water (ensure they are completely dry before reinstallation).
• Barruko garbiketa: Periodically use compressed air to clear dust from internal components and fans. Ensure the system is powered off and unplugged before cleaning.
• Kanpoko garbiketa: Garbitu kanpoko gainazalak leun batekin, damp oihal. Saihestu akabera kaltetu dezaketen produktu kimiko gogorrak.

Arazoak konpontzea

Arazoak badituzu, kontuan hartu arazoak konpontzeko ohiko urrats hauek:

• Potentziarik gabe: Ensure the PSU is switched on, all power cables (24-pin, 8-pin CPU, GPU PCIe) are securely connected, and the front panel power switch cable is correctly attached to the motherboard.
• Haizagailuak ez dira biratzen: Check fan connections to the motherboard or fan controller. Ensure sufficient power is supplied.
• Front I/O Not Working: Verify that all front panel cables (USB, Audio) are correctly connected to the motherboard headers.
• Gehiegizko berotzea: Ensure proper fan configuration (intake/exhaust), clean dust filters, and check CPU cooler/GPU heatsink mounting.

Zehaztapenak

The Antec FLUX SE MESH BTF Mid Tower Case offers robust features for PC builders:

Bermea eta Laguntza

For warranty information and technical support, please refer to the official Antec webwebgunearekin edo jarri harremanetan zure saltzailearekin. Gorde erosketaren frogagiria bermearen erreklamazioetarako.

Erabiltzailearen aholkuak

• Kableen kudeaketa: Take your time with cable management. A tidy interior not only looks better but also improves airflow and makes future upgrades easier.
• Haizagailuaren orientazioa: Ensure your fans are oriented correctly for optimal airflow. Typically, front and bottom fans should be intake, while rear and top fans should be exhaust.
• Hauts-iragazkiaren garbiketa: Make cleaning dust filters a routine task (e.g., once a month) to maintain good airflow and prevent dust buildup inside your PC.
• Osagaien bateragarritasuna: Always double-check the dimensions of your CPU cooler, GPU, and PSU against the case's maximum clearance specifications before purchasing.