1. Sarrera
Thank you for choosing the KALOC UT75 Full Motion TV Wall Mount. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new TV mount. The UT75 is designed to securely hold 55-75 inch LCD/LED televisions, offering full motion capabilities including tilt and swivel for optimal viewangeluak. Mesedez, irakurri arretaz eskuliburu hau instalazioa egin aurretik eta gorde etorkizunean erreferentzia gisa.
2. Segurtasun informazioa
OHARRA: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty. Improper installation can lead to serious injury or death.
- This product is intended for installation by qualified personnel only. If you are unsure about the installation process, consult a professional installer.
- Ensure the mounting surface (wall) can safely support the combined weight of the mount and your TV.
- Do not exceed the maximum weight capacity of 40kg (88lbs).
- Verify your TV's VESA pattern is compatible with the mount (200x200mm to 600x400mm).
- Use only the provided mounting hardware. If any parts are missing or damaged, contact KALOC support immediately.
- Mantendu haurrak eta maskotak urrun instalatzean.
- Avoid installing the mount near heat sources, direct sunlight, or areas with high humidity.
- Aldian-aldian egiaztatu torloju eta konexio guztiak ondo finkatuta daudela ziurtatzeko.
3. Paketearen edukia
Please check to ensure all components are present and undamaged before beginning installation. If anything is missing or broken, please contact customer support.
- KALOC UT75 TV Wall Mount Assembly
- Telebista muntatzeko euskarriak (2 pieza)
- Horma-plaka
- Mounting Hardware Kit (screws, anchors, washers, spacers for various TV models and wall types)
- Argibide eskuliburua (dokumentu hau)

4. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Marka | KALOC |
| Modelo zenbakia | UT75 |
| Produktuaren izena | Mugimendu osoko telebista hormako muntaia |
| Materiala | SPCC (Cold Rolled Steel) |
| Telebista-tamaina bateragarria | 55" - 75" |
| VESA bateragarritasuna | 200x200mm-tik 600x400mm-ra |
| Inklinazio angelua | -5° / +5° |
| Kargatzeko Ahalmena | 40 kg (88 lb) |
| Harresirako distantzia | 30 mm - 363 mm |


5. Instalazioa eta konfigurazioa
Before you begin, ensure you have the necessary tools (e.g., drill, stud finder, level, screwdriver, wrench) and understand the type of wall you are mounting to (wood stud, concrete, brick). It is highly recommended to have two people for installation.
5.1. Instalazioaren aurreko egiaztapenak
- Check Wall Strength: Confirm your wall can support the combined weight of your TV and the mount.
- Locate Studs/Solid Points: Use a stud finder to locate wood studs or ensure you are drilling into solid concrete/brick.
- Zehaztu muntaketa-altuera: Decide on the desired height for your TV. The center of the TV should ideally be at eye level when seated.
5.2. Telebistako euskarriak telebistara lotzea
- Kontu handiz jarri telebista aurpegia behera gainazal leun eta garbi batean, marradurak saihesteko.
- Identifikatu telebistaren atzealdean dauden VESA muntatzeko zuloak.
- Hautatu telebistaren muntaketa-zuloetarako egokiak diren torlojuak, arandelak eta tartekatzaileak hardware-kitatik.
- Attach the two vertical TV brackets to the back of your TV using the selected hardware. Ensure they are securely fastened and evenly spaced.

5.3. Hormako plaka muntatzea
- Hold the wall plate against the wall at your desired mounting height. Use a level to ensure it is perfectly horizontal.
- Markatu zulaketa-lekuak hormako plakaren zuloen bidez.
- Drill pilot holes at the marked locations. For wood studs, drill appropriate size pilot holes. For concrete/brick, use a masonry drill bit and insert wall anchors.
- Secure the wall plate to the wall using the provided lag bolts and washers. Tighten all bolts firmly.

5.4. Hanging the TV
- Laguntzarekin, altxatu telebista kontu handiz erantsitako euskarriekin.
- Hook the TV brackets onto the wall plate. Ensure both brackets are properly seated and engaged.
- Secure the TV to the wall plate using the safety screws or locking mechanisms provided.
- Gently test the mount's stability and ensure the TV is securely attached before releasing it.
5.5. Installation Video Overview
For a visual guide on the product and its features, please watch the following video. While it showcases various models, the general principles of full-motion mounts apply.
6. Funtzionamendua
The KALOC UT75 mount offers flexible adjustments to achieve your desired viewesperientzia.
- Inklinazio doikuntza: The TV can be tilted -5°/+5° to reduce glare or optimize viewing from different heights. Loosen the tilt adjustment knobs (if present) or use the provided tool, adjust to the desired angle, and then re-tighten securely.
- Swivel and Extension: The full-motion arms allow you to swivel the TV left or right and extend it away from the wall (from 30mm to 363mm). Gently push or pull the TV to the desired position.
- Kableen kudeaketa: Utilize the integrated cable management features (if present on your model) to route and conceal cables for a clean look.

7. Mantentzea
Mantentze-lan erregularrak zure telebista-euskarriaren iraupena eta funtzionamendu segurua bermatzen ditu.
- Garbiketa: Garbitu euskarria zapi leun eta lehor batekin. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
- Egiaztatu konexioak: Periodically (e.g., every 6 months) inspect all mounting screws and bolts to ensure they are still tight and secure.
- Ikuskatu kalteak ikusteko: Check for any signs of wear, corrosion, or damage to the mount components. If any damage is found, discontinue use and contact customer support.
8. Arazoak
If you encounter issues with your KALOC UT75 TV mount, refer to the following common problems and solutions:
- Telebista ez dago maila berean:
- Ensure the wall plate was installed perfectly level.
- Check if the TV brackets are evenly attached to the TV.
- Some mounts have a post-installation leveling adjustment feature; consult the specific instructions for your model.
- Muntaketa solte edo ezegonkorra sentitzen da:
- Kendu telebista euskarritik berehala.
- Re-check all wall mounting bolts and TV bracket screws to ensure they are fully tightened.
- Verify the wall structure is adequate and the anchors (if used) are properly installed.
- Ensure the TV's weight does not exceed the mount's capacity.
- Zailtasuna inklinazioa/biraketa doitzeko:
- Ensure any locking knobs or screws for tilt adjustment are loosened before attempting to adjust.
- Apply gentle, even pressure when moving the TV. Do not force it.
Urrats hauek zure arazoa konpontzen ez badute, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin.
9. Erabiltzaileentzako aholkuak
- Consider using a cable management sleeve or ties to bundle and hide cables running from your TV to other devices for a cleaner aesthetic.
- When adjusting the TV's position, always hold the TV firmly with both hands to prevent accidental drops.
- Optimorako viewing, adjust the tilt and swivel based on your seating position and room lighting conditions.
10. Bermea eta Laguntza
For any questions, technical assistance, or warranty claims, please contact KALOC customer support.
Bezeroarentzako arretarako kontaktua:
WhatsApp: +86 15013439327
Please have your model number (UT75) and purchase information ready when contacting support.





