1. Sarrera
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Deye SUN-6K-SG04LP1-EU-SM2 series single-phase hybrid inverters. These inverters are designed for solar energy systems, offering versatile power management for both grid-tied and off-grid applications. Please read this manual thoroughly before installation and operation.
1. irudia: Aurrealdea view of the Deye Hybrid Inverter.
2. Segurtasun informazioa
OHARRA: DESHARKETA ELEKTRIKOAREN ARRISKUA. Installation and maintenance must be performed by qualified personnel only. Failure to follow these instructions may result in serious injury or death.
- Always disconnect all power sources (PV array, battery, and AC grid) before performing any service or maintenance.
- Ziurtatu inbertsorearen lurra egokia.
- Ez erabili inbertsorerik hondatuta badago edo gaizki funtzionatzen duela dirudienean.
- Keep children and unauthorized personnel away from the inverter.
- Observe all local electrical codes and standards during installation.
Figure 2: Inverter front panel showing the 'Warning electric shock' label.
3. Paketearen edukia
Egiaztatu behean zerrendatutako elementu guztiak zure paketean sartuta daudela. Elementuren bat falta bada edo hondatuta badago, jarri harremanetan zure hornitzailearekin.
- Inbertsore hibridoa x1
- Horman muntatzeko euskarria x1
- Stainless steel anti-collision bolt M6*60 x4
- Stainless steel mounting screws M4*12 x4
- Komunikazio paraleloko kablea x1
- Datalogger (aukerakoa) x1
- Bateriaren tenperatura sentsorea x1
- Sentsore Clamp x1
- Erabiltzailearen eskuliburua x1
- Magnetic ring for battery x1
- Magnetic ring for BMS and Meter communication cable x2
- Magnetic ring for AC wires x2
- DC+/DC- Plug connectors including metal terminal xN
- Eguzki-energia fotovoltaikorako konektore giltza berezia x1
Figure 3: Visual representation of included accessories and components.
4. Zehaztapenak
The following tables detail the technical specifications for the Deye SUN-6K-SG04LP1-EU-SM2 series hybrid inverters.
4.1. Battery Input Data & PV String Input Data
Figure 4: Detailed specifications for battery and PV input.
4.2. AC Input/Output Data, Efficiency, Protection & General Data
Figure 5: Detailed specifications for AC input/output, efficiency, protection, and general data.
5. Dimentsio fisikoak
Refer to the diagram below for the physical dimensions of the inverter, including connectors and brackets.
Figure 6: Inverter dimensions and mounting points.
6. Konfigurazioa eta instalazioa
The Deye Hybrid Inverter must be installed by a certified electrician or qualified solar professional. Improper installation can lead to equipment damage, personal injury, or void the warranty.
6.1. Muntatzeko kokapena
- Choose a cool, dry, and well-ventilated area, away from direct sunlight and flammable materials.
- Ensure the mounting surface can support the inverter's weight (approx. 17.6-19 kg).
- Maintain adequate clearance around the inverter for proper airflow and heat dissipation.
- Mount the inverter vertically using the provided wall mounting bracket and screws.
6.2. Konexio elektrikoak
- PV konexioa: Connect the solar PV strings to the designated DC+ and DC- terminals. Observe correct polarity and voltage mugak.
- Bateria konexioa: Connect the battery bank to the battery terminals, ensuring correct polarity. The inverter supports Lead-acid or Lithium-ion batteries.
- Sare korronte alternoko konexioa: Connect the AC output to the main electrical panel or grid connection point.
- Karga konexioa: Connect critical loads to the inverter's load output terminals.
- Komunikazio konexioak: Connect the parallel communication cable, datalogger (if applicable), battery temperature sensor, and sensor clamp as per the system design. The inverter supports RS485/RS232/CAN communication interfaces.
Refer to the detailed wiring diagrams in the full product manual for specific connection instructions.
7. Funtzionamendu-argibideak
Once installed and all connections are verified, the inverter can be powered on.
7.1. Hasierako abiarazpena
- Ensure all external DC and AC breakers are in the OFF position.
- Turn on the battery breaker.
- Turn on the PV array DC switch.
- Turn on the AC grid breaker.
- Observe the inverter's display for status indicators.
Figure 7: Inverter display and control buttons.
7.2. Jarraipena
The inverter features a built-in display for real-time monitoring of system performance, including PV input, battery status, AC output, and fault codes. Optional dataloggers and monitoring modes (GPRS/WiFi/Bluetooth/4G/LAN) allow for remote monitoring and data logging.
8. Mantentzea
Mantentze-lan erregularrak zure inbertsorearen errendimendu optimoa eta iraupena bermatzen ditu.
- Garbiketa: Periodically clean the inverter's exterior and ventilation openings to prevent dust accumulation, which can hinder natural cooling. Use a soft, dry cloth.
- Ikuskapena: Annually inspect all electrical connections for tightness and signs of corrosion. Check cables for damage.
- Ingurumena: Ziurtatu instalazio-ingurunea zehaztutako funtzionamendu-tenperatura eta hezetasun-tarteen barruan mantentzen dela.
Deskonektatu beti energia mantentze-lanak egin aurretik.
9. Arazoak
Atal honek arazo arruntetarako jarraibide orokorrak eskaintzen ditu. Arazo konplexuetarako, jarri harremanetan laguntza teknikoarekin.
9.1. Potentzia irteerarik ez
- Check if all DC and AC breakers are in the ON position.
- Egiaztatu PV sarrerako bolumenatage eta egungoa.
- Egiaztatu bateria bolumenatage eta konexioak.
- Inspect for any fault codes displayed on the inverter screen.
9.2. Inverter Not Charging Battery
- Ensure PV input is sufficient and within operating range.
- Check battery temperature sensor connection and reading.
- Verify battery type settings in the inverter configuration.
9.3. Inverter Display Not Working
- Check the main power supply to the inverter.
- If the inverter has power but the display is blank, contact support.
10. Erabiltzaileentzako aholkuak
- For optimal performance, ensure your PV array is clean and free from shading.
- Regularly monitor your system's performance through the display or optional monitoring platforms to identify any anomalies early.
- Keep the inverter's ventilation clear to prevent overheating, especially in warmer climates.
11. Bermea eta Laguntza
The Deye Hybrid Inverter comes with a warranty period of 5 to 10 years. The exact warranty duration depends on the final installation site and specific terms. Please refer to the official warranty policy document for detailed information.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your authorized Deye dealer or technical support provider.
