1. Produktua amaitu daview
The SEAFLO Magnetic Circulation Pump is a centrifugal magnetic drive pump designed for continuous duty in various applications, including marine air conditioning systems. It eliminates the need for a shaft seal, enhancing durability and reducing maintenance. The pump is serviceable with a standard screwdriver and can operate fully submerged or in open air, offering complete moisture protection. It is capable of pumping liquids with a specific gravity greater than water and higher viscosity.
Ezaugarri nagusiak:
- Suitable for AC systems up to 12,000 BTU.
- Run dry safe for normal workloads.
- Lifetime exceeding 10,000 hours.
- Continuous duty operation.
- 8.5 GPM seawater circulation pump.
- Designed to replace various marine air conditioning pump brands.
Aurrealdea view of the SEAFLO 500GPH Mini Water Pump, showcasing its compact design and inlet/outlet ports.
Produktu ofizialaren bideo emanaldiaasing the SEAFLO Air Conditioning Pump, its features, and applications.
A diagram illustrating key features: Industry standard inlet/outlet, epoxy coated shell for submersion, liquid cooling system for continuous operation, graphite bearing for dry run safety, and industry standard mounting base.
2. Konfigurazioa eta instalazioa
The SEAFLO pump is designed for easy installation with industry-standard inlet and outlet sizes and a standard mounting base. Ensure all connections are secure and leak-free before operation.
2.1 Dimentsioak eta konexioak
Detailed technical drawing providing dimensions of the pump, including overall length (144.5mm / 5.7in), width (121.0mm / 4.76in), height (74.5mm / 2.93in), and mounting base dimensions (188.0mm / 7.4in length, 102.0mm / 4in width, 65.0mm / 2.56in height). Inlet is 3/4in-14FPT and Outlet is 1/2in-14MPT.
- Sarrerako Portua: 3/4" FPT (Eme Hodi Hari)
- Irteera portua: 1/2" MPT (Male Pipe Thread)
- Muntaketa: The pump features an industry-standard mounting base with rubber feet for stable installation.
2.2 Typical Marine AC System Integration
The pump is commonly used in marine air conditioning systems to circulate seawater for cooling. A typical setup involves drawing water from a sea cock through a strainer, then pumping it through the A/C condenser coil, and finally discharging it via a sea water outlet.
A schematic diagram showing the SEAFLO pump's integration into a marine air conditioning system, including connections for sea cock (ball valve), strainer, A/C condenser coil, and sea water outlet.
3. Funtzionamendu-argibideak
The SEAFLO pump is designed for continuous operation and is safe to run dry under normal workloads. It can be installed either fully submerged or in an open-air environment, thanks to its moisture-protected design. Ensure the liquid temperature does not exceed 54°C (130°F) for optimal performance and longevity.
4. Mantentzea
Regular maintenance ensures the longevity and efficient operation of your SEAFLO pump. The pump is designed to be serviceable with a standard screwdriver.
4.1 Mantentze-lanetarako aholku orokorrak
- Periodically inspect the pump's inlet and outlet for any blockages or debris.
- Ensure all electrical connections are clean and secure.
- Check for any signs of wear or damage to the power cord and housing.
- If the pump is operating in an open-air environment, ensure it is protected from excessive moisture and direct sunlight.
4.2 Component Identification for Service
Bat eztanda egin zuen view diagram detailing the individual components of the pump, numbered for identification with a corresponding parts list.
| Gakoa | Deskribapena | Kantitatea |
|---|---|---|
| 1 | Torlojuak | 4 |
| 2 | Ponparen estalkia | 1 |
| 3, 8 | Gomazko tapoia | 2 |
| 4, 7 | Garbigailua | 2 |
| 5 | Ardatza | 1 |
| 6 | Impeller system | 1 |
| 9, 11 | O-ringa | 2 |
| 10 | Ponpa-ganbera | 1 |
| 12 | Drive magnet | 1 |
| 13 | Motor karkasa | 1 |
| 14 | Marine base | 1 |
| 15 | Torlojuak | 4 |
| 16 | Oinak muntatzea | 4 |
| 17 | Elikatze-kablea | 1 |
5. Arazoak
If you encounter issues with your SEAFLO pump, consider the following common troubleshooting steps:
- Potentziarik gabe: Check electrical connections, ensure the power source is active, and verify the correct voltage (115V or 230V) is supplied to the pump.
- Low Flow or No Flow: Inspect the inlet and outlet for blockages. Clean any strainers in the system. Check for air leaks in the suction line. Ensure the impeller system (Key 6) is free from debris and operating correctly.
- Ezohiko zarata: This could indicate debris in the pump chamber, a worn bearing, or an issue with the impeller. Disassemble the pump (refer to Section 4.2) and inspect components.
- Gehiegizko berotzea: Ensure adequate liquid flow through the pump. Verify the liquid temperature is within the specified limits (max 54°C / 130°F).
If problems persist after these steps, contact SEAFLO customer support or a qualified technician.
6. Zehaztapenak
| Zehaztapena | Balioa |
|---|---|
| Marka Izena | ITSASOA |
| Modelo zenbakia | SFCPA1-G500-01 / SFCPA2-G500-01 |
| liburukiatage | 115V / 230V |
| Emaria | 8.5 GPM (60 Hz) / 31 LPM (50 Hz) |
| Maiztasuna | 50 Hz / 60 Hz |
| Head (60 Hz) | 19 ft / 8.2 psi |
| Head (50 Hz) | 4.3 m |
| Power (115V, 60Hz) | 115 W |
| Power (115V, 50Hz) | 110 W |
| Power (230V, 60Hz) | 110 W |
| Power (230V, 50Hz) | 105 W |
| Amps Draw (115V, 60Hz) | 1.8 A |
| Amps Draw (115V, 50Hz) | 1.9 A |
| Amps Draw (230V, 60Hz) | 0.9 A |
| Amps Draw (230V, 50Hz) | 0.9 A |
| Likidoaren Tenperatura | Max 54°C (130°F) |
| Sarrerako Portuak | 3/4" FPT |
| Irteera-atakoak | 1/2" MPT |
| Betebehar Zikloa | Etengabea |
| Pisua | 7.5 lb (3.42 kg) |
| Ziurtagiria | CE, ISO9001:2000, ROHS |
| Kezka handiko produktu kimikoa | Bat ere ez |
| Aplikazioa | Other, Machining, Marine |
| Energia iturria | Elektrikoa |
| Presioa | Presio Handia |
| Egitura | Ponpa zentrifugoa |
6.1 Errendimendu-kurba
Graph showing the pump's performance curve, illustrating Head (in feet and meters) versus Flow (in GPM and LPM) for both 50 Hz and 60 Hz frequencies.
7. Bermea eta Laguntza
The SEAFLO 500GPH Mini Water Pump comes with a 2-year warranty. For technical assistance, warranty claims, or any other inquiries, please contact SEAFLO customer support directly. You can find more information and contact details on the official SEAFLO webgunea: WWW.SEAFLO.COM.
