1. Sarrera
The FOSSiBOT FAC580 is a high-efficiency alternator charger designed to power your FOSSiBOT power station or compatible third-party power stations directly from your vehicle's alternator. Delivering up to 580W of power, it charges significantly faster than traditional in-vehicle cigarette chargers, ensuring your devices are ready for use during your journeys. This manual provides essential information for safe installation, operation, and maintenance of your FAC580 charger.
2. Segurtasun informazioa
Please read all safety instructions carefully before using the FOSSiBOT FAC580 Alternator Charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure the charger is installed in a well-ventilated area to prevent overheating.
- Do not expose the charger to water, rain, or excessive moisture.
- Keep the charger away from flammable materials and explosive gases.
- Always ensure the vehicle's engine is off and the FAC580 switch is in the off position before connecting or disconnecting cables to the car battery.
- Erabili emandako kableak eta osagarriak soilik.
- Do not attempt to disassemble or modify the charger. Contact customer support if service is required.
- The FAC580 features multi-layer protection including short-circuit, over-current, over-heat, and over-voltage protection to safeguard your car battery, charger, and power station.
3. Paketearen edukia
Egiaztatu elementu guztiak zure paketean daudela:
- 1 x FOSSiBOT FAC580 Alternator Charger
- 1 x Input Cable (5M)
- 1 x Output Cable (0.5M)
- 4 x Torlojuak
- 1 x bihurkin
- 1 x Erabiltzailearen eskuliburua
4. Produktua amaitu daview
The FOSSiBOT FAC580 is designed for ease of use and efficient charging. Familiarize yourself with its components:
- Wire terminal to MC4: Connects to your power station.
- Argiaren adierazle argia: Displays the product's operational status.
- fan: Provides active cooling for product heat dissipation.
- Aldatu botoia: Controls power on/off and selects charging modes.
- Wire crimping terminal to O-ring terminal: Connects to the car battery.
The FAC580 is available in two colors: Classic Black and Vibrant Green.
5. Instalazio gida
Follow these steps to properly install your FOSSiBOT FAC580 Alternator Charger in your vehicle:
- 1. urratsa: Konektatu kableak
Fix the input and output lines to the FAC580 with the provided screws. Before final installation, check that the product functions properly. Connect the output and input cables of the FAC580 correctly. - Step 2: Track
Route the input cable from the vehicle's interior to the car battery compartment. Ensure the cable is securely routed and not exposed to moving parts or sharp edges. - Step 3: Wire to Battery
Ensure the FAC580 switch is in the off position. Connect the input cable to the car battery: the red wire connects to the Battery positive (+) terminal, and the black wire connects to the Battery negative (-) terminal. - Step 4: Fixed
Securely fix the FAC580 onto a suitable surface within your car, such as the car wall or trunk, using the provided screws. Ensure it is stable and won't move during driving.
- Step 5: Connect Power Station
Connect your power station to the FAC580 using the XT90-MC4 cable. - Step 6: Select Mode & Start Charging
Switch the FAC580 to the desired mode to begin charging.
6. Funtzionamendu-argibideak
The FAC580 features a two-stage power switch to adjust output power based on input voltage, ensuring efficient and safe charging. The charger automatically stops charging if the input voltage barrutitik kanpo dago.
6.1. Kargatzeko moduak
- Mode 1 (Recommended for Driving): Activate this mode during journeys for fast car charging.
- Sarrera boltage >14V: Auto boost to 580W (Fast Charging)
- Sarrera boltage 13.2V-14V: 300W Max Output
Image: Depicts the FAC580 charging a power station in a vehicle while driving, utilizing Mode 1. - Mode 2 (Emergency Use Only): Use this mode when you need urgent power with the engine off. The FAC580 instantly powers your power station and protects your car's battery while charging.
- Sarrera boltage >14V: Auto boost to 580W (Fast Charging)
- Sarrera boltage 13.2V-14V: 300W Max Output
Image: Shows the FAC580 providing emergency power to a power station from a vehicle with the engine off, using Mode 2.
6.2. Automatic Cut-off
- Sarrera boltage <13.2V: The charger automatically cuts off to prevent draining your car battery.
7. Zehaztapenak
Detailed technical specifications for the FOSSiBOT FAC580 Alternator Charger:
| Kategoria | Xehetasuna |
|---|---|
| Orokorra | Marka: FOSSiBOT Type: Alternator Charger Eredua: FAC580 Color: Black (also available in Gray) |
| Potentzia Sarreraren Zehaztapenak | Kargatzen Voltage Range: 12V - 18V / 24V - 33V Beheko voltage Protection (UVP): 12V Beheko voltage Recovery: 12.5V Gehiegizko bolumenatage Protection (OVP): 35V Gehiegizko bolumenatage Recovery: 31V |
| Irteeraren zehaztapenak | Irteera-potentzia nominala: 580W No-Load Output Voltage: 45 - 48V Gehienezko irteerako korrontea: 15A Kargatzeko eraginkortasuna: % 92 Erreserbako energia-kontsumoa: < 3W |
| Pisua eta Tamaina | Produktuaren pisua: 0.8 kg Paketearen pisua: 1 kg Product Size (L x W x H): 18.2 x 16.2 x 4.7 cm Package Size (L x W x H): 19 x 17 x 5 cm |
8. Arazoak
If you encounter issues with your FOSSiBOT FAC580, refer to the following common problems and solutions:
- Charger not turning on or charging:
- Check all cable connections to ensure they are secure and correctly wired to the car battery and power station.
- Verify the car battery voltage. Sarrera bolumena badatage is below 13.2V, the charger will automatically cut off to protect the car battery. Start the vehicle's engine to increase alternator output.
- Ensure the FAC580 switch is in the correct operating mode (Mode 1 or Mode 2).
- Kargatzeko abiadura motela:
- Ensure the vehicle's engine is running and the alternator is providing sufficient power. Mode 1 (driving mode) is designed for optimal charging during journeys.
- Egiaztatu sarrerako bolumenatage. If it's between 13.2V-14V, the output will be limited to 300W. For 580W fast charging, the input voltage needs to be >14V.
- Kargagailua bero sentitzen da:
- The FAC580 has a professional cooling system with fans. Ensure the vents are not blocked and there is adequate airflow around the unit.
- The charger has over-heat protection and will reduce output or shut down if it gets too hot. Allow it to cool down.
9. Erabiltzaileentzako aholkuak
- Cable Inclusion: The FAC580 package includes all necessary cables (5M input cable, 0.5M output cable) for installation in your vehicle, along with screws and a screwdriver.
- Kokapen egokiena: For best performance and cooling, install the FAC580 in a location with good air circulation, such as the trunk or a dedicated compartment, away from direct sunlight or heat sources.
- Engine-Off Charging: When using Mode 2 for emergency engine-off charging, monitor your car battery's voltage to ensure it doesn't drop too low, although the charger has built-in protection.
10. Bermea eta Laguntza
The FOSSiBOT FAC580 Alternator Charger comes with a 1-year warranty. For technical support, warranty claims, or any questions regarding your product, please contact your retailer or FOSSiBOT customer service. Please have your purchase receipt and product model number ready when contacting support.
