AT1-4000X Variable Frequency Drive Instruction Manual

1. Sarrera

The AT1-4000X Variable Frequency Drive (VFD) is designed to provide precise speed control for 3-phase 4kW AC motors, operating from a single-phase 220V AC input. This VFD utilizes a unique control method to achieve high torque, high accuracy, and a wide speed regulating range, ensuring high performance in various applications.

Ezaugarri nagusiak hauek dira:

• Excellent anti-trip performance and adaptability to challenging power conditions, temperature fluctuations, humidity, and dust interference, significantly enhancing stability.
• Optimized PWM control technology and electromagnetic compatibility for low noise and reduced electromagnetic interference.
• User-friendly design for easy operation and wiring.
• Fast start and stop response with substantial torque at low speeds.

2. Segurtasun-neurriak

Failure to follow these instructions may result in death, serious injury, or significant property loss.

• Always ensure the power supply is disconnected before performing any wiring or maintenance.
• Never connect the U/V/W output terminals to the AC power supply. Doing so will cause severe damage to the inverter.
• Do not install the inverter in environments with flammable or explosive gases, as this poses a risk of explosion.
• The ground terminal (GND) of the inverter must be properly and securely grounded.
• Only qualified professionals should perform internal wiring or open the inverter's casing due to the presence of high voltage.

3. Produktua amaitu daview

The AT1-4000X VFD features a clear digital display and an intuitive control panel for easy monitoring and adjustment of motor parameters. The unit is designed for efficient heat dissipation with integrated cooling fins and fans.

3.1 Kontrol-panela

Aurrealdeko panelak honako hauek ditu:

• Bistaratze digitala: Shows operational parameters such as frequency (Hz), forward/reverse status (FWD/REV), and revolutions per minute (r/min).
• Adierazleak: Power, Hz, FWD, REV, r/min.
• Botoiak:
  • DISP: Display mode selection.
  • PROG: Program mode entry/exit.
  • FUNC/DATA: Function/Data entry.
  • FWD/REV: Forward/Reverse direction control.
  • ▲ (Up Arrow): Increase value or navigate menus.
  • ▼ (Down Arrow): Decrease value or navigate menus.
  • RUN: Start motor operation.
  • STOP/RESET: Stop motor operation or reset errors.
• Botoi birakaria: For fine adjustment of frequency or parameter values.

3.2 Terminalak

The VFD is equipped with clearly labeled terminals for power input and motor output.

4. Zehaztapenak

5. Konfigurazioa

Before proceeding with installation and wiring, ensure all safety precautions are understood and followed. Installation should be performed by qualified personnel.

5.1 Instalazio-ingurunea

• Install the VFD in a clean, dry, and well-ventilated area.
• Avoid direct sunlight, high temperatures, excessive humidity, and dusty environments.
• Ensure there is sufficient space around the unit for proper heat dissipation.
• Ez instalatu material sukoi edo lehergarrien ondoan.

5.2 Kableatzeko jarraibideak

The VFD is designed for simple wiring. Always ensure the power supply is OFF before connecting any wires. Connect wires after removing the terminal screws.

6. Funtzionamendu-argibideak

Once the VFD is correctly installed and wired, you can begin operation. Familiarize yourself with the control panel functions.

6.1 Oinarrizko funtzionamendua

1. Piztu: Ensure all connections are secure, then apply single-phase 220V AC power to the L and N terminals. The VFD display should illuminate.
2. Abiarazi motorra: Sakatu RUN button to start the motor. The FWD or REV indicator will light up depending on the current direction setting.
3. Maiztasuna/Abiadura doitu: Use the rotary knob to adjust the output frequency, which in turn controls the motor speed. The display will show the current frequency (Hz) or RPM (r/min).
4. Norabidea aldatu: Sakatu FWD/REV button to toggle the motor's rotation direction.
5. Motorra gelditu: Sakatu STOP/RESET botoia motorra gelditzeko.

6.2 Parameter Programming

The PROG eta FUNC/DATA buttons, along with the arrow keys (▲, ▼), are used to access and modify various operating parameters. Refer to the detailed programming manual (if available) for specific parameter settings relevant to your application.

• Sakatu PROG to enter or exit programming mode.
• Erabili ▲ eta ▼ to navigate through parameter groups or individual parameters.
• Sakatu FUNC/DATA to select a parameter for editing or to confirm a value.
• Use the rotary knob or arrow keys to change the parameter value.
• Sakatu FUNC/DATA berriro balio berria gordetzeko.

7. Mantentzea

Regular maintenance helps ensure the longevity and reliable operation of your VFD.

• Garbiketa: Mantendu VFD-a garbi eta hautsik eta hondakinik gabe. Erabili zapi leun eta lehor bat garbitzeko. Ez erabili garbitzaile likidorik.
• Aireztapena: Ensure that the cooling fans and ventilation openings are not obstructed to prevent overheating.
• Ikuskapena: Aldian-aldian egiaztatu kableatu-konexio guztiak estutasuna eta higadura edo kalteen zantzurik dagoen egiaztatzeko.
• Zerbitzu profesionala: Due to high internal voltages, any internal inspection or repair should only be performed by qualified service personnel. Do not attempt to open the VFD casinzeure burua.

8. Arazoak

Atal honek arazo arruntetarako jarraibide orokorrak eskaintzen ditu. Arazo konplexuetarako, jarri harremanetan laguntza teknikoarekin.

If an error occurs, the VFD display may show an error code. Press the STOP/RESET button to clear the error after addressing the cause.

9. Erabiltzaileentzako aholkuak

• For optimal performance, ensure the VFD is matched correctly to your motor's power rating (e.g., 4kW motor for this 4kW VFD).
• When adjusting frequency, make gradual changes to avoid sudden motor stress.
• Always ensure proper grounding to prevent electrical hazards and ensure stable operation.
• Keep the VFD's ventilation clear to prevent overheating, especially during continuous operation.

10. Bermea eta Laguntza

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the point of purchase or contact the seller directly. Keep your purchase records handy when seeking support.