HITBOX ARC200 mini3 2-in-1 Welding Machine User Manual

1. Sarrera

Thank you for choosing the HITBOX ARC200 mini3 2-in-1 Welding Machine. This compact and lightweight inverter welder is designed for both MMA (Stick) and Lift TIG welding processes, offering excellent performance for various materials including mild steel, sheet metal, square pipe, cast iron, metal cage, and stainless steel. Featuring advanced IGBT inverter technology, Hot Start, Arc Force, Anti-stick, and VRD functions, this machine provides reliable and efficient welding capabilities.

Figure 1: HITBOX ARC200 mini3 Welder, illustrating its ultra-portable design with dimensions (9.25in L, 5.9in H, 4.5in W) and weight (5.59 LBS).

Figure 2: The welder supports both ARC (MMA) and Lift TIG welding modes. Note: A WP17V TIG torch needs to be purchased separately for Lift TIG operation.

2. Segurtasun-neurriak

• Always wear appropriate personal protective equipment (PPE), including welding helmet, gloves, and protective clothing.
• Ensure proper ventilation in the welding area to avoid inhaling fumes.
• Ez erabili makina d-n.amp edo baldintza hezeak.
• Ziurtatu makina behar bezala lurrarekin lotuta dagoela.
• Deskonektatu energia mantentze-lanak edo doikuntzak egin aurretik.
• Mantendu haurrak eta baimenik gabeko langileak soldadura-eremutik urrun.

3. Produktua amaitu daview eta Osagarriak

3.1 Panelaren Sarrera

Figure 3: Front and Rear Panel Introduction

1. Uneko pantaila
2. MMA Function Indicator
3. Lift TIG Function Indicator
4. Power & Abnormal Indicator
5. Modua aldatzeko botoia
6. Current Regulation Knob (press to set function)
7. "+" Output Connector
8. "-" Output Connector
9. Potentzia Sarrera
10. Piztu/Itzali etengailua
11. Hozteko haizagailua

3.2 Osagarriak

Figure 4: Standard accessories included with your welder.

• Argibide eskuliburua (dokumentu hau)
• 5 x Welding Rods
• Garbiketa eskuila
• Elektrodo euskarria
• Beheko Clamp

4. Konfigurazioa

4.1 Desontziratzea eta ikuskatzea

Carefully unpack the welding machine and all accessories. Inspect for any damage that may have occurred during transit. If any damage is found, contact your supplier immediately.

4.2 Energia-konexioa

Connect the power input cable (9) to a suitable 220V power supply. Ensure the power source meets the machine's requirements and is properly grounded. This model is equipped with a UK Plug.

4.3 Welding Cable Connections

Proper connection of welding cables is crucial for safe and effective operation. Refer to the diagrams below for specific connections based on the welding mode.

4.3.1 Stick (MMA) Welding Connection

Figure 5: Stick (MMA) Welding Connection Diagram

• Konektatu lurra Clamp to the "-" Output Connector (8).
• Connect the Electrode Holder to the "+" Output Connector (7).
• Erantsi lurra clamp securely to the workpiece.
• Insert the welding electrode into the electrode holder.

4.3.2 Lift TIG Welding Connection

Note: A TIG gun (WP17V torch) needs to be purchased separately for Lift TIG operation.

Figure 6: Lift TIG Welding Connection Diagram

• Konektatu lurra Clamp to the "+" Output Connector (7).
• Connect the TIG Torch to the "-" Output Connector (8).
• Erantsi lurra clamp securely to the workpiece.

5. Funtzionamendu-argibideak

5.1 Piztu/Itzali

Flip the Power ON/OFF Switch (10) to turn the machine on or off. The Power & Abnormal Indicator (4) will illuminate when the machine is powered on.

5.2 Modu hautaketa

Press the Mode Switching Button (5) to toggle between MMA (Stick) welding mode and Lift TIG welding mode. The corresponding indicator (2 for MMA, 3 for Lift TIG) will light up on the digital display (1).

5.3 Indarrean dagoen araudia

Rotate the Current Regulation Knob (6) to adjust the welding current. The current value will be shown on the Current Display (1). Press the knob to set additional functions if available (e.g., Arc Force, Hot Start, Anti-stick, VRD).

Figure 7: Digital Display showing current and function indicators.

5.4 Welding Features

• Hasiera beroa: Provides an initial boost of current to make arc striking easier, especially with difficult-to-start electrodes.
• Arku indarra: Prevents the electrode from sticking to the workpiece by increasing the current when the arc length becomes too short.
• Makilaren aurkakoa: Automatically reduces the current if the electrode sticks to the workpiece, allowing for easy removal without damaging the electrode or workpiece.
• VRD (liburuatage Murrizteko gailua): Zirkuitu irekiko bolumena murrizten dutage to a safe level when the machine is idle, enhancing user safety.
• IGBT Technology: Ensures stable arc, high efficiency, and reliable performance.

5.5 Suitable Welding Materials

The HITBOX ARC200 mini3 is suitable for welding a variety of materials:

8. irudia: Adibamples of materials suitable for welding with this machine.

• Altzairu Epela
• Txapa
• Hodi karratua
• Burdinurtua
• Metalezko kaiola
• Altzairu herdoilgaitza

6. Mantentzea

• Garbiketa: Regularly clean the machine, especially the cooling fan (11) and ventilation openings, to prevent dust and debris buildup. Use the provided cleaning brush or compressed air.
• Kableen ikuskapena: Periodically check welding cables, electrode holder, and ground clamp for wear, damage, or loose connections. Replace damaged components immediately.
• Biltegiratzea: Store the welding machine in a dry, clean environment when not in use.
• Zerbitzu profesionala: For any internal repairs or complex issues, contact qualified service personnel.

7. Arazoak

• Potentziarik gabe: Check the power input cable (9) connection, the Power ON/OFF Switch (10), and the main power supply.
• "ERR" Indicator (on display): If the "ERR" indicator illuminates, it typically signifies an internal fault or an overload condition. Turn off the machine, disconnect from power, wait a few minutes, and then restart. If the error persists, contact support.
• Poor Arc/Sticking Electrode: Ensure proper current settings for the electrode size and material. Check for clean connections and a good ground clamp contact. The Anti-stick and Arc Force features should help mitigate these issues.
• Gehiegizko berotzea: If the machine stops during operation, it might be due to overheating. Allow the machine to cool down. Ensure the cooling fan (11) is unobstructed and functioning correctly.

8. Zehaztapenak

9. Erabiltzaileentzako aholkuak

• Praktikak perfektua egiten du: If new to welding, start with scrap materials to get a feel for the machine and different settings.
• Electrode Selection: Choose the correct electrode type and diameter for your material thickness and desired weld properties.
• Garbitasuna: Always ensure the workpiece is clean and free of rust, paint, or oil for optimal weld quality.
• Lur-konexioa: A strong, clean ground connection is vital for stable arc performance.
• TIG zuzi: Remember that a TIG torch is a separate purchase for Lift TIG welding. Ensure it is compatible with the machine.

10. Bermea eta Laguntza

Bermeari buruzko informazioa, laguntza teknikoa edo zerbitzu-kontsultak egiteko, jarri harremanetan zure saltzailearekin edo fabrikatzailearekin zuzenean. Gorde erosketa-agiria erosketaren frogagiri gisa.