1. Sarrera
The CONENTOOL ME86H WiFi Smart Thermostat is an advanced temperature control device designed specifically for electric floor heating systems. It offers precise temperature management, flexible weekly programming, and convenient remote control via a smartphone application. This manual provides detailed instructions for the safe installation, operation, and maintenance of your thermostat.
Ezaugarri nagusiak:
- Intelligent Weekly Programming: Customize heating schedules for weekdays and weekends with up to 6 periods per day.
- High-End Touch Screen: Sensitive and durable touch interface for easy operation and cleaning.
- Segurtasun Ezaugarri Bikoitzak: Child lock to prevent accidental changes and power outage memory to restore settings automatically.
- Tenperaturaren kontrol zehatza: NTC high-precision sensor ensures ±1℃ accuracy, preventing overheating or overcooling.
- Tenperatura sorta zabala: Adjustable from 5℃ to 95℃, suitable for various electric heating applications.
- 16A Large Load: Supports 230V voltage and a maximum load of 3680W.
- Ultra-Low Standby Power Consumption: Less than 1W.
- WiFi konexioa: Remote control and monitoring via a dedicated smartphone app.
2. Segurtasun informazioa
Please read all safety warnings and instructions carefully before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Installation must be carried out by a qualified electrician in accordance with local wiring regulations.
- Always disconnect power at the circuit breaker before performing any work on the thermostat or heating system.
- Ez instalatu termostatoa hezetasun handiko, eguzki-argia zuzenean jasotzen duten edo tenperatura altuegia duten lekuetan.
- Ensure the thermostat's electrical ratings (voltage and current) match your heating system's requirements.
- Mantendu gailua haurren eskura ez dagoen leku batean, ustekabean erabiltzea saihesteko.
- The thermostat is designed for electric floor heating systems only. Do not use with water underfloor heating or gas heating systems.
3. Paketearen edukia
Paketea irekitzean, egiaztatu honako elementu guztiak daudela:
- 1 × CONENTOOL ME86H Thermostat
- 1 × Instruction Manual (this document)
- 1 × 3-meter NTC Sensor Cable
- 2 × Muntatzeko Torlojuak
4. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Marka | CONENTOOL |
| Eredua | ME86H |
| Bertsioa | With WiFi |
| Energia hornidura boltage | AC230V, 50 / 60Hz |
| Karga Korrontea | 16A (for Electric Floor Heating) |
| Self-Consumed Power | < 1 W |
| Tenperatura-sentsorea | NTC |
| Tenperaturaren zehaztasuna | ± 1℃ |
| Tenperatura Ezarpen Tartea | 5 ℃ eta 95 ℃ artean |
| Ziurtagiria | CE |
| Jatorria | Txina kontinentala |
| Materiala | Flame-retardant PC material |
| Paketearen pisua | 0.3 kg |
5. Instalazioa
5.1 Muntaketa
The CONENTOOL ME86H thermostat is designed for installation in standard 86mm flush boxes or European 60mm flush boxes. Ensure the mounting location is free from drafts, direct sunlight, and other heat sources that could affect temperature readings.
5.2 Kableatu-diagrama
OHARRA: Disconnect power at the circuit breaker before wiring. Incorrect wiring can cause damage to the thermostat, heating system, or personal injury. Consult a qualified electrician if you are unsure.
The thermostat is intended for 16A electric floor heating systems. Connect the live (L) and neutral (N) power supply wires, the load wires (L1, N1), and the NTC sensor cable as shown in the diagram below.
Kableatu terminalak:
- 1 (L1): Load Live
- 2 (N1): Karga Neutroa
- 3 (N): Elikatze-iturria Neutroa
- 4 (L): Power Supply Live
- Sensor (1, 2): NTC Temperature Sensor (B=3950, R25°C=10k)
6. Funtzionamendua
6.1 Thermostat Display and Buttons
Familiarize yourself with the thermostat's display and touch-sensitive buttons for manual control and programming.
Botoiaren funtzioak:
- Power Key (Circle icon): Touch to turn the system On or Off.
- Mode Key (Square icon with dots): Select between 'Period Control Mode' (programmed schedule) or 'Manual Mode'.
- Up/Down Keys (Arrow icons): Adjust the temperature setting and navigate system parameters. Press and hold both Up and Down keys simultaneously for 5 seconds to activate/deactivate the Key Lock function.
- Clock Key (Clock icon): Adjust the current time and day of the week.
- Eskuzko modua: Allows you to set a desired temperature manually, overriding the programmed schedule.
- Modu automatikoa: The thermostat operates according to the set weekly program.
6.2 Asteko programazioa
The thermostat supports 5+2, 6+1, or 7-day programmable modes, allowing you to set different temperatures for up to 6 periods each day. This feature helps optimize energy consumption.
Example Program (5+2 Mode):
| Modua | Aldia | Denbora | Tenperatura |
|---|---|---|---|
| Monday - Friday | P1 | 06:00 | 22°C |
| P2 | 08:00 | 15°C | |
| P3 | 11:00 | 15°C | |
| P4 | 12:00 | 15°C | |
| P5 | 17:30 | 22°C | |
| P6 | 22:00 | 15°C | |
| Saturday - Sunday | P1 | 08:00 | 22°C |
| P2 | 23:00 | 16°C |
Refer to the full instruction manual (if provided separately) for detailed steps on setting up your weekly program.
6.3 Aplikazioen kontrola (Bizitza adimenduna)
The thermostat can be controlled remotely via a smartphone application, typically 'Smart Life' or a similar smart home app. This allows you to adjust settings, view uneko tenperaturak eta kudeatu ordutegiak edonondik.
Setup Steps (General):
- Deskargatu 'Smart Life' aplikazioa zure telefonoaren aplikazio dendatik (iOS edo Android).
- Erregistratu edo sartu zure kontuan.
- Add a new device in the app and select 'Thermostat' or 'Heater'.
- Follow the in-app instructions to connect your thermostat to your home WiFi network. This usually involves putting the thermostat into pairing mode (refer to the thermostat's display or a more detailed app setup guide).
- Once connected, you can control the thermostat remotely.
7. Mantentzea
The CONENTOOL ME86H thermostat requires minimal maintenance to ensure optimal performance and longevity.
- Garbiketa: Garbitu pantaila astiro-astiro eta casing leun, lehor edo apur bat d batekinamp cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surface.
- Sentsoreen zainketa: Ensure the NTC sensor cable is not damaged or obstructed, as this can affect temperature accuracy.
- Software eguneraketak: Periodically check the 'Smart Life' app for any available firmware updates for your thermostat to ensure you have the latest features and bug fixes.
8. Arazoak
If you encounter issues with your thermostat, try the following troubleshooting steps:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Termostatoa ez da pizten | Ez dago energia-iturririk; kableatu okerra | Check circuit breaker. Verify wiring connections (refer to Section 5.2). |
| Berokuntza ez dabil | Thermostat in OFF mode; Temperature set too low; Wiring issue; Heating system fault | Ensure thermostat is ON. Increase set temperature. Check wiring. Consult a heating technician if the heating system itself is faulty. |
| Tenperatura-irakurketa okerra | Sensor fault; Sensor placement affected by drafts/heat sources | Check sensor cable for damage. Ensure sensor is correctly installed and not exposed to external influences. |
| WiFi konexio arazoak | Incorrect WiFi password; Router too far; Network interference | Verify WiFi password. Move router closer or use a WiFi extender. Restart router and thermostat. Re-attempt pairing process. |
| Termostatoak ez du ukimenari erantzuten | Key Lock activated | Press and hold Up/Down keys for 5 seconds to deactivate Key Lock. |
Irtenbide hauek probatu ondoren arazoa konpontzen ez bada, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin.
9. Erabiltzaileentzako aholkuak
- Optimal Programming: Utilize the weekly programming feature to set lower temperatures when you are away or asleep to maximize energy savings without sacrificing comfort during active hours.
- Aplikazioaren integrazioa: For best results, integrate the thermostat with your smart home ecosystem (e.g., Google Home) for voice control and advanced automation.
- Sentsoreen kokapena: Ensure the floor sensor is correctly embedded in the floor to get accurate floor temperature readings and prevent overheating.
10. Bermea eta Laguntza
CONENTOOL products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official CONENTOOL webgunea.
Mesedez, gorde zure erosketa-froga berme-erreklamazioetarako.
