Sarrera
This manual provides detailed instructions for the installation, operation, and maintenance of the Midea KJR-12B/DP (T)-E Fixed Frequency Line Controller for central air conditioning systems. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.
Konfigurazioa eta Instalazioa
The controller is designed for fixed frequency central air conditioning systems. Proper installation is crucial for safe and efficient operation. It is recommended that installation be performed by a qualified technician.
Paketearen edukia:
- KJR-12B/DP (T)-E Wire Controller (English Version)
- 12B Connection Cable
- 12B Socket Terminal
Instalazio urratsak:
- Muntaketa: Choose a suitable location on a wall, away from direct sunlight, heat sources, or drafts, and at a height that allows for easy operation. Secure the controller to the wall using appropriate fasteners through the mounting holes on the back of the unit.
- Kableatua: Connect the provided 12B connection cable to the terminal block on the back of the controller. Ensure that each wire is correctly matched to the corresponding terminal (A, B, C, D, E) as per the air conditioning unit's wiring diagram.
- Konexio seguruak: Double-check all wiring connections to ensure they are secure and properly insulated.
- Piztu: Once installation is complete and verified, restore power to the air conditioning system.
Funtzionamendu-argibideak
The controller features an intuitive interface with a digital display and various control buttons. Lift the front flap to access all control buttons.
Bistaratzeko adierazleak:
- AUTOA: Automatic operating mode.
- Hozten: Hozteko modua.
- LEHORRAK: Deshumidifikazio modua.
- BEROA: Berokuntza modua.
- ZAINTZAILEA BAKARRIK: Fan operation without heating or cooling.
- ZALETUEN ABIADURA: Uneko haizagailuaren abiaduraren ezarpena adierazten du.
Botoiaren funtzioak:
| Botoia | Funtzioa |
|---|---|
| MODUA | Cycles through operating modes: AUTO, COOL, DRY, HEAT, FAN ONLY. |
| ABANATZAILEA | Haizagailuaren abiadura doitzen du (adibidez, Baxua, Ertaina, Altua, Automatikoa). |
| TEMP (Up/Down) | Nahi den tenperatura-ezarpena doitzen du. |
| DENBORA ON | Sets a timer for the unit to turn on. |
| ATERA | Sets a timer for the unit to turn off. |
| JARRAITU NI | Activates a feature where the controller senses the temperature at its location and adjusts operation accordingly. |
| BEROGAILU AUX. | Engages auxiliary heating (if available and connected). |
| EKO | Energia aurrezteko modua aktibatzen du. |
| Swing | Controls the louver swing function (if applicable). |
| Berrezarri | Resets the controller settings. |
| BLOKATU | Locks the controller to prevent unauthorized changes. |
Mantentzea
Regular maintenance ensures the longevity and optimal performance of your controller.
- Garbiketa: Wipe the surface of the controller with a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these may damage the unit.
- Ikuskapena: Periodically check the connection cable for any signs of wear or damage.
- Potentzia-zikloa: If the controller behaves erratically, try turning off the power to the air conditioning unit at the circuit breaker for a few minutes, then restore power.
Arazoak konpontzea
Kontrolatzailearekin arazoak badituzu, jarraitu arazoak konpontzeko ohiko urrats hauek:
| Arazoa | Balizko Kausa / Irtenbidea |
|---|---|
| Kontrolatzailea ez da pizten. | Check the power supply to the air conditioning unit. Ensure the connection cable is securely attached to the terminal block. |
| Pantaila hutsik dago edo keinuka ari da. | Verify power supply. Try pressing the RESET button. If the issue persists, contact support. |
| Botoiek ez dute erantzuten. | Check if the LOCK function is active. Press the RESET button. |
| Air conditioner not responding to commands. | Ensure the controller is correctly wired to the air conditioning unit. Check the air conditioning unit's own power and status. |
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Eredua | KJR-12B/DP (T)-E |
| Mota | Fixed Frequency Line Controller for Central Air Conditioning |
| Marka | Midea |
| Jatorria | Txina kontinentala |
| Neurriak (gutxi gorabehera) | 10 cm (luzera) x 10 cm (zabalera) x 10 cm (altuera) |
| Pisua (gutxi gorabehera) | 0.5 kg |
| Kimikoak | None (High-concerned chemical) |
Erabiltzailearen aholkuak
- Egiaztatu bateragarritasuna: Before installation, always confirm that the back of your unit matches the provided images and that the model number KJR-12B/DP (T)-E is compatible with your Midea central air conditioning system.
- Kableatuen egiaztapena: Pay close attention to the terminal labels (A, B, C, D, E) during wiring to ensure correct connections and prevent damage.
Bermea eta Laguntza
For warranty information, technical support, or service inquiries, please contact your original point of purchase or an authorized Midea service center. Keep your purchase receipt as proof of purchase.
