Android Car Player Instruction Manual

Android Car Player Instruction

ZEHATZA

• power Supply Volllgo
• Uneko gehieneko kontsumoa
• Irteera potentzia maximoa

1. UNIVERSAL MACHINE WIRING DIAGRAM
   
2. SPECIAL VEHICLE WIRING DIAGRAM

KABLEATUAREN neurketak

• 10P: Connect the reversing video input. Note: The two short wires above this line are the Bluetooth antenna and the WIFI antenna. Even if the reversing camera is not connected, this cable needs to be connected to the machine, otherwise Bluetooth and WIFI will not be connected, and carplay and Android auto will not be connected.
• 6P: Connect USB-2.
• 4P. Connect USB-1.
• 8P: Connect the CANBUS box. Note: When the product you purchased has a CANBUS box, you must connect the CANBUS box to the
• 8Pin socket on the body, otherwise some of the original car functions will not be available.
• 12P.360-degree panoramic reversing image (only supported by some models).
• 20P.RCA plug. The AMP CONT line needs to pay attention to: If your car supports speakers such as JBL or BOSE, you may need to connect this cable to the on-off control of your car’s power amplifier, and try connecting it when there is no sound.

ATZEKOZKO KAMERA INSTALATZEKO METODOA

KABLEATU UNIBERTSALAREN KABLEATU ARGIBIDEAK

Tips The wiring harness colors of some models may be different. Please refer to the wire labels and the positions on the plugs and sockets.

UNIVERSAL MACHINE POWER PIN DEFINITION

BOLANTEEN KONTROLAK IKASTEA
Eduki sakatuta jatorrizko autoaren bolanteko botoi bat eta bilatu bolanteko botoiaren funtzioari dagokion botoiaren ikonoa. Egin klik ikonoan kolorea aldatzeko, ikaskuntza arrakastatsua da.

iPHONE Mirrorlink (Modelo batzuek bakarrik onartzen dute)
Gailua iPhonera konektatzen denean, telefonoaren pantailaren edukia autoaren pantailan proiektatuko da.

Android Mirrorlink (Modelo batzuek bakarrik onartzen dute)
When using an Android device, after connecting the USB data cable. you will be prompted to install the APP software. After installation, Plug the data cable again, it will enter the screen mirroring mode. And it can be operatedon both the player screen and the phone screen. Only the image transfer is successful at this time. The sound can only be  transmitted after the Bluetooth connection is successful.

Apple Car Play (Only some models support)

1. Wired connection: Just connect the USB data cable, and then it will auto matically enter the CarPlay interface.
2. Wireless connection: first tum on the bluetooth and wifi functions of the mobile phone. and then connect the bluetooth. Then it will automatically enter the CarPlay interface.
   (Note. The signal is transmitted through wifi at this ime, so even if the Bluetooth function is tumed off, it will be transmitted normally. When the wifi function is turned off. CarPlay will be disconnected.)

Android Auto (Modelo batzuek bakarrik onartzen dute)
Eginbide hau ez da onartzen herrialde guztietan, eta "Google Play zerbitzuak lokalean erabilgarri egon behar dute.

1. "Android Auto" deskargatu eta instalatu behar da software in “Google Play”
2. Android 6.0 edo berriagoa duen telefono mugikorra erabili behar da. Baliozko datu-kable konexioa erabili behar da.
3. Kable bidezko konexioa: konektatu besterik ez dago USB datu-kablea, eta automatikoki Android Auto interfazean sartuko da.
4. Wireless connection: First turn on the Bluetooth and wifi functions of the mobile phone. and then connect the Bluetooth. Then it will automatically enter the Android Auto interface. (Note: The signal is transmitted through wifi at this time, so even if the Bluetooth function is turned off, it will be transmitted normally. When the wifi function is turned off, Android Auto will be disconnected.)

ARAZO OHIKOAK ETA ARAZO SIMPLEAK

Ezin da normalean abiarazi

1. “Yellow” “Red” “Black’ this 3 lines only connected 2 line of them, so it will not start, it should be that the yellow line is connected to the positive pole, red line to the key control line, black to the negative pole, less connection or wrong connection does not boot.
2. Jatorrizko auto-lerroa eta unitate-kableatua ezin dira kolorera konektatu, jatorrizko auto-lerroaren kolorea ez da estandarra, horrela konektatzen bazara, aktibatu ez ezik, erre ere egin daiteke.
3. Jatorrizko autoaren entxufea ezin da zuzenean konektatu unitate berrira, nahiz eta konektatu besterik ez bada ere, ezin da erabili. bestela ez da piztuko edo erreko.
4. 3 hariak ondo konektatuta daude, baina ez da abiarazten. Egiaztatu linea horiko fusiblea hautsita dagoen. Fusiblearekin arazorik ez badago, bihurritu hari horia eta gorria elkarrekin. Piztu tekla eta sakatu unitatearen pizteko botoia piztu daitekeen ikusteko.
5. Every time you change the fuse, it burns. Please don’t change it again The reason is that when you first connect the positive and negative poles, the protection circuit of the unit is short-circuited. The unit can be repairedunder the guidance of our master. No basis can only be returned to the after-sales or new unit. If these are no problem, or also don’t boot, please make the final step to confirm, find a 12V battery or 12V power supply yellow and “red twist together with the positive, black to the negative pole. press the button check if it can boot or no, if you can boot, it showed that the original car line is not right connect, or there is a problem with the car line.  If it can’t be boot, the unit is broken. Does not boot unit, check the line carefully, do not blindly suspect the unit problem.

Itzaltze automatikoa

1. Kablearen errorea konektatzea: kable urdina (antenen elikadura automatikoa) unitatearen elikatze-kablera konektatuta badago, itzaltze automatikoa gertatuko da. Mesedez, jarraitu kableatu metodo zuzena arazoa konpontzeko.
2. Liburukiatage ezegonkorra da: bilatu 12V-5A zein den elikadura eta berriro probatu automatikoki itzaliko den ikusteko. Proba egin ondoren automatikoki itzaltzen ez bada, ordeztu elikadura iturria. Automatikoki itzaltzen bada, arazoa da unitatearekin.

Zarata dago

1. Jatorrizko bozgorailuaren potentzia txikiegia da. Unitatearen bolumena igotzen denean. zarata egongo da.
   Irtenbidea: Bozgorailua ordezkatzean edo abestia entzutean, bolumena ez da handiegia izan behar.

Bozgorailuaren kablea lurrean dago.
Irtenbidea: Hartu burdinazko bozgorailuaren kablea. Zuzenean konektatutako bozgorailuaren kablera.

Urruneko kontrola ezin da erabili

1. Test method Turn on the camera of the mobile phone and align the light of the remote control then press the button of the remote control to see if the phone will light up. If it is not lit there will be no power. Replace the battery: If it is it there is electricity, which proves that there is no problem with the remote control.

Ezarpenak ezin dira gorde (ez dago memoriarik)

1. Lerro horia eta marra gorria elkarrekin lotuta daude (bereizi horia positibotik, gorria teklaren kontrolarekin).
2. Horia eta gorria alderantzikatu egiten dira (posizioa aldatu besterik ez dago).

Bluetootha ez dabil
Piztu makina, bilatu makinaren Bluetooth izena telefono mugikorraren Bluetootha erabiliz, eta, gero, sakatu Konektatu, konektatu ondoren, deiak erantzun edo abestiak erreproduzi ditzakezu Bluetooth bidez.

Produktuak kea isurtzen du
Ordeztu fusiblea FUSIBLE, arazoa ezin bada konpondu, barne-zirkuitua erre egin da. Salmenta osteko zerbitzua behar da.

Soinua ezin da egokitu

1. Mesedez, berrezarri unitatea edo deskonektatu korronte-kablea eta konektatu.
2. The Volume knob is broken, and it can be replaced.

Atzerako kamerak ez du erakusten

1. Kableatu okerrak edo kableatuak falta dira.

Kamera konektatzeko metodoa:

1. Bilatu osagarriak: 1 kamera + 1 elikatze-kable + 1 bideo-kable.
2. Find the port of the wiring. First find the reverse control line on the power line of the unit. The control line is a pink line. Connect this line to the positive pole of 12V and the screen will turn blue. And then find the back of the unit the CAM video input interface, find the positive and negative of the backup light.
3. Kameran bi entxufe daude, entxufe gorria elikatze-kablera konektatuta dago, horia bideo-kablean sartzen da, elikatze-kablearen kable gorria eta bideo-kablearen kablea elkarrekin torlojututa daude polo positiboan. alderantzizkoa lamp, and the black wire of the power cable is not used. connected, the other end of the video cable is connected to the CAM video input interface on the back of the unit. The red line coming out of the video line is connected to the reversing control line of the power line.
4. Kamera hautsita dago. l badaamp kamerari behar bezala kabletuta dagoena ez dago pizten. hautsi eta berri batekin ordezkatuko da.

USB gailuak ezin dira erreproduzitu
Formateatu USB flash diskoa, eta file sistema hautatzen da: FAT32, deskargatu berriro edo bi abesti eta saiatu berriro. Oraindik ez badu funtzionatzen, mesedez ordezkatu USB flash drive.

FM-k ez du irrati-katea jasotzen

1. The antenna plug is not fully inserted, the antenna is disconnect or the line is disconnected.
2. Search station, press AS will automatically search or press the before or after button. Can’t solve the above 2 points. Please unplug the antenna plug and find a screwdriver or a metal strip to insert into the antenna.

Instalatu ondoren ez dago soinurik
Dear customers, the unit has been tested before shipment. If there is no sound, it is usually a wiring error or the original car speaker wire is short- circuited with iron. According to the steps to check it:

1. Egiaztatu bozgorailuaren kablea zirkuitulaburtuta dagoen eta konektatuta dagoen. Mesedez, berriro konektatu zirkuitu laburren bat baduzu.
2. Check how many speaker cables according to the original speaker cable if there are only 2 speaker cables, to prove that the original car line does not match our unit, you need to re-route the original car line. One speaker must lead to 2 speaker wires. 2 speakers must be have 4 speaker cables to available.

Denbora baten buruan ez dago soinurik
Disconnect all the speaker cable from the unit (do not remove them), and then find an external speaker to receive the gray and purple of the tail line of the unit.Check any group, and then try to see if there is any sound If there is a sound, it is proven that the car’s speaker line is short-circuited with iron or the speaker is damaged. If there is no sound, the unit is broken.

Aholkuak: If the device is updated, the functions are subject to change without prior notice