Sarrera
The Presto EverSharp Electric Knife Sharpener (Model 08800) provides an efficient and automatic method for sharpening most non-serrated kitchen and sport knives. This two-stage system is designed to precision grind a perfect sharpening angle and then fine hone and polish the edge, delivering professional results for home use.
1. irudia: Aurrealdea view of the Presto EverSharp Electric Knife Sharpener.
Berme garrantzitsuak
Etxetresna elektrikoak erabiltzean, oinarrizko segurtasun-neurriak jarraitu behar dira beti sute, deskarga elektriko eta pertsonei lesio arriskua murrizteko, besteak beste:
- Read all instructions before using the sharpener.
- To protect against electrical hazards, do not immerse the sharpener in water or other liquids.
- Deskonektatu entxufetik erabiltzen ez duzunean, piezak jarri edo kendu aurretik eta garbitu aurretik.
- Saihestu pieza mugikorrekin kontaktua.
- Ez erabili aparaturik kablea edo entxufea hondatuta dagoenean, edo aparatuak gaizki funtzionatzen duenean edo erori edo hondatu ondoren. Itzul ezazu aparatua baimendutako zerbitzu-instalazio hurbilenera aztertzeko, konpontzeko edo doikuntza elektriko edo mekanikorako.
- Gailuaren fabrikatzaileak gomendatzen edo saltzen ez dituen eranskinak erabiltzeak sua, deskarga elektrikoa edo lesioak eragin ditzake.
- Ez erabili kanpoan.
- Ez utzi kablea mahaiaren edo erakusmahaiaren ertzetik zintzilik zintzilik, ezta gainazal beroak ukitu ere.
- Tresna hau etxeko erabilerarako soilik da.
- Always ensure the sharpener is placed on a stable, flat surface before use. The non-slip base helps secure the unit during operation.
Konfigurazioa
- Unpack the knife sharpener and place it on a clean, dry, and stable countertop.
- Ensure the power switch is in the "OFF" (O) position.
- Entxufatu korronte kablea 120 voltioko korronte alternoko entxufe elektriko estandar batean.
- Verify the non-slip suction cups on the base are securely attached to the countertop to prevent movement during sharpening.
2. Irudia: Behea view of the sharpener, highlighting the non-slip suction cups for stability.
Funtzionamendu-argibideak
The Presto EverSharp features a two-stage sharpening system. Stage 1 is for precision grinding, and Stage 2 is for fine honing and polishing. Always sharpen non-serrated knives. For serrated knives, refer to the specific instructions below.
Sharpening Non-Serrated Knives
- Turn the sharpener ON by pressing the power switch to the "I" position. The sharpening wheels will begin to rotate.
- Stage 1 - Coarse Sharpening: Insert the knife blade into the left slot of Stage 1 (marked '1'). Hold the knife with the blade perpendicular to the sharpener and pull it towards you with light, even pressure. The precision blade guides will automatically position the knife at the ideal sharpening angle.
- Repeat this process 3-4 times for each side of the blade, alternating between the left and right slots of Stage 1. Ensure you pull the entire length of the blade through the slot, from heel to tip.
- Stage 2 - Fine Honing: Move to Stage 2 (marked '2'). Insert the knife blade into the left slot of Stage 2. Again, pull the knife towards you with very light pressure, allowing the Sapphirite wheels to fine hone and polish the edge.
- Repeat this 3-4 times for each side of the blade, alternating between the left and right slots of Stage 2. Hau datage refines the edge for a razor-sharp finish.
- After sharpening, turn the sharpener OFF (O) and carefully wipe the blade with a damp oihala metalezko limadurak kentzeko.
Figure 3: Demonstrating how to hold and guide a knife through the sharpening slot.
Figure 4: Close-up of the power switch, indicating ON/OFF positions.
Aiztoak zorrozten
This sharpener can be used for non-electric serrated knives that are only serrated on one side. For these knives, only use Stage 2 (fine honing) and only sharpen the non-serrated side of the blade. Do not attempt to sharpen the serrated edge.
- Turn the sharpener ON.
- Insert the non-serrated side of the blade into the appropriate slot of Stage 2 (marked '2').
- Pull the knife towards you with light pressure, ensuring only the non-serrated edge makes contact with the sharpening wheel.
- Errepikatu 3-4 aldiz.
- Turn the sharpener OFF and clean the blade.
Aholku lagungarriak
- Always use light pressure. Excessive pressure can slow the motor and damage the blade.
- Maintain a consistent speed when pulling the knife through the slots.
- For very dull knives, you may need additional passes through Stage 1 before moving to Stageta 2.
- Sparks may occur when sharpening high carbon steel knives; this is normal.
Video 1: Demonstration of the Presto EverSharp Knife Sharpener in action, showing how to achieve sharp blades quickly.
Video 2: Explaining the design for non-serrated kitchen knives and proper usage.
Mantentzea eta Garbiketa
Regular cleaning ensures optimal performance and longevity of your sharpener.
- Always unplug the sharpener before cleaning.
- Wipe the exterior of the sharpener with a damp oihal. Ez sartu unitatea uretan.
- The sharpener is equipped with receptacles underneath to catch metal filings. To clean, remove the red plugs on the bottom of the unit and empty the filings. Replace the plugs securely after cleaning.
- Do not attempt to lubricate the sharpening wheels or any other part of the sharpener.
Arazoak konpontzea
- Sharpener does not turn on: Ensure the power cord is securely plugged into a working electrical outlet and the power switch is in the "I" (ON) position.
- Labana ez da ondo zorrozten:
- Ensure you are using light, consistent pressure. Too much pressure can hinder sharpening.
- Verify you are pulling the knife through the correct slots for Stage 1 eta Stageta 2.
- For very dull knives, more passes through Stage 1 may be required.
- Ensure the knife is non-serrated, or if serrated, only the non-serrated side is being sharpened in Stageta 2.
- Excessive sparks: While normal for high carbon steel, ensure you are not applying excessive downward pressure.
Zehaztapenak
| Modelo zenbakia | 08800 |
| Marka | Presto |
| Materiala | Plastic, Sapphirite wheels |
| Kolorea | Zilarrezko/beltza |
| Produktuaren neurriak | 9.9"L x 7.2"Z x 4.8"A |
| Elementuaren pisua | 2.95 kilo |
| Grit Mota | Fine (for Stage 2) |
| Energia iturria | 120 Volts AC (North American Electrical Standards) |
Bermea eta Laguntza
The Presto EverSharp Electric Knife Sharpener (Model 08800) comes with a 1-year limited warranty against defects. For warranty claims or product support, please refer to the contact information provided in your product packaging or visit the official Presto webgunea.
