Philips 7388 20 Watt-eko 6 Volt-eko Halogeno Bonbillaren Erabiltzaile Eskuliburua

Sarrera

This manual provides essential information for the safe and effective use of your Philips 7388 20 Watt 6 Volt Halogen Bulb. Please read these instructions carefully before installation and operation to ensure optimal performance and longevity of the product.

The Philips 7388 halogen bulb is designed to produce a comfortable, warm white light, maintaining its luminous efficiency throughout its operational life. It features a G4 socket and is suitable for various lighting applications.

Segurtasun Informazioa

Beti beti segurtasun-neurri hauek:

• Itzali: Bonbilla instalatu, kendu edo garbitu aurretik, deskonektatu beti argindarrari korrontea.
• Kontuz maneiatu: Halogen bulbs can become very hot. Allow the bulb to cool completely before handling.
• Saihestu kontaktua: Do not touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves if necessary.
• Zuzena Voltage: Ziurtatu aparatuaren bolumenatage bonbillaren bolumenarekin bat datortage (6 Volts). Using an incorrect voltage can damage the bulb or the fixture.
• Egokia den finkapena: Use only in fixtures designed for halogen bulbs and with appropriate wattage balorazioak.
• Xedapena: Bonbilla erabiliak tokiko araudien arabera bota.

Konfigurazioa eta Instalazioa

Instalazio egokia lortzeko, jarraitu urrats hauek:

1. Step 1: Power Disconnection
   Ensure the power supply to the lighting fixture is turned off at the circuit breaker or by unplugging the fixture.
2. Step 2: Remove Old Bulb (if applicable)
   If replacing an existing bulb, allow it to cool completely. Gently pull the old G4 bulb straight out from its socket.
3. Step 3: Prepare New Bulb
   Carefully remove the new Philips 7388 bulb from its packaging. Avoid touching the glass envelope with bare hands. If you accidentally touch it, wipe it clean with a lint-free cloth moistened with rubbing alcohol.
4. Step 4: Insert New Bulb
   Align the two pins of the G4 bulb with the holes in the socket. Gently push the bulb straight into the socket until it is fully seated. Do not force it.
5. 5. urratsa: Berrezarri boterea
   Bonbilla ondo instalatuta dagoenean, berrezarri argindarra.
6. 6. urratsa: proba
   Piztu argiaren etengailua behar bezala funtzionatzen duela egiaztatzeko.

Funtzionamendu-argibideak

The Philips 7388 halogen bulb operates immediately upon receiving power. No special operating procedures are required beyond turning the fixture's power switch on or off.

• dimming: If used with a compatible dimmer switch, the brightness of the bulb can be adjusted. Ensure the dimmer is rated for halogen or incandescent loads and matches the bulb's voltage eta wattage.
• Bero irteera: Halogen bulbs produce heat. Ensure adequate ventilation around the fixture to prevent overheating.

Mantentzea

Minimal maintenance is required for the Philips 7388 halogen bulb.

• Garbiketa: If the bulb becomes dusty, ensure the power is off and the bulb is cool. Gently wipe the glass with a soft, dry, lint-free cloth. Do not use liquid cleaners directly on the bulb.
• Ordezkoa: When the bulb reaches the end of its life, replace it following the "Setup and Installation" steps. Always use a bulb with the same specifications (20W, 6V, G4 base) to ensure compatibility and safety.

Arazoak konpontzea

If your Philips 7388 bulb is not functioning as expected, consider the following:

• Bonbilla ez da argitzen:
  • Egiaztatu gailuaren energia-iturria piztuta dagoen.
  • Ensure the bulb is correctly seated in the G4 socket.
  • Inspect the bulb for any visible damage or a broken filament. If damaged, replace the bulb.
  • Probatu argindarra bonbilla funtzionatzen duen batekin, argindarrarekin arazorik dagoen baztertzeko.
• Bonbilla distira:
  • Ziurtatu bonbilla guztiz sartuta dagoela entxufean.
  • Egiaztatu konexio solteak dauden aparatuan edo kableatuan.
  • If using a dimmer, ensure it is compatible with halogen bulbs and not overloaded.
• Short Bulb Life:
  • Egiaztatu liburu zuzenatage (6V) is being supplied to the bulb. Overvoltage can significantly reduce bulb life.
  • Ensure the bulb is not being touched with bare hands during installation, as skin oils can cause premature failure.
  • Check for excessive vibration or heat in the fixture, which can shorten bulb life.

Zehaztapenak

Key technical specifications for the Philips 7388 Halogen Bulb:

Bermea eta Laguntza

For warranty information or technical support regarding your Philips 7388 Halogen Bulb, please refer to the official Philips Lighting webwebgunera edo jarri harremanetan zuzenean bezeroarentzako arreta-zerbitzuarekin. Gorde erosketa-agiria erosketaren frogagiri gisa.

You can visit the Philips Store for more information: Philips denda Amazonen