Broan-NuTone BEL6 Bathroom Exhaust Fan with LED Light

1. Sarrera

The Broan-NuTone BEL6 Roomside Series ENERGY STAR bathroom exhaust fan with LED light is designed for versatile and easy installation, including retrofitting without attic access and no drywall cutting. This fan effectively reduces moisture and odors in bathrooms up to 45 sq. ft. with quiet operation at 0.9 sones. Its modern CleanCover grille offers a seamless design and simplifies cleaning.

Figure 1: Key features of the Broan-NuTone BEL6 Bathroom Exhaust Fan.

2. Segurtasun informazioa

OHARRA: Sute, deskarga elektriko edo pertsonei lesioen arriskua murrizteko, kontuan hartu honako hau:

• Deskonektatu beti zerbitzu-paneleko korrontea unitatea mantendu edo garbitu aurretik.
• Instalazio-lanak eta kableatu elektrikoak pertsona kualifikatuek egin behar dituzte aplikagarriak diren kode eta estandar guztien arabera, suaren aurkako eraikuntza-kode eta estandarrak barne.
• Erabili unitate hau fabrikatzaileak nahi duen moduan soilik. Galderarik baduzu, jarri harremanetan fabrikatzailearekin.
• Erabili segurtasun-betaurrekoak instalazioan.

3. Paketearen edukia

Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:

• Haizagailuen Etxebizitza
• Blower Batzarra
• Kableatu panela
• Harizko Itxitura
• Hodi-konektorea
• Torlojuak
• Maskara (igeltsuzko horma-babeserako)
• Parrillaren apaingarriak
• Grille with LED Light Module

2. Irudia: Lehertuta view of the BEL6 fan components.

4. Beharrezko tresnak

Instalaziorako normalean tresna hauek behar dira:

• Zulagailua
• Bihurkin
• Kable Clamp Konektorea
• Hodiak
• Paperezko zinta
• Hari intxaurrak
• Segurtasun Betaurrekoak

5. Instalatzeko jarraibideak

This section outlines the steps for installing your Broan-NuTone BEL6 exhaust fan. For a visual guide, please refer to the installation video below.

5.1. Unitatea prestatzea

1. Kendu haizagailuaren multzoa eta kableatu-panela haizagailuaren karkasatik.

5.2. Mounting the Housing

2. Mount the fan housing securely to the ceiling structure using appropriate fasteners. The design features foldable mounting ears for versatile installation.

3. Irudia: Lehertuta view highlighting internal components and mounting features.

5.3. Duct Connector Installation

3. Install the duct connector with the included screws, ensuring the tabs engage in the housing.
4. Attach the ductwork to the connector using foil tape for a secure seal.

5.4. Kableatu konexioa

5. Connect the electrical wiring according to local codes and the wiring diagram provided in the full manual.
6. Attach the wire enclosure by tab and screw, then reinstall the wiring panel and secure it.

5.5. Blower Assembly Installation

7. Install the blower assembly back into the housing and plug it in.

5.6. Grille and LED Module Installation

8. Once drywall is complete, install the grille trim.
9. Plug in the LED module.
10. Install the grille by sliding the clips into the grille trim. The patented SlideClip technology allows for fast, springless attachment.

Figure 4: Detail of the SlideClip grille for easy installation.

6. Funtzionamendua

The Broan-NuTone BEL6 fan provides effective ventilation for rooms up to 45 sq. ft. Its 0.9 sones rating ensures quiet operation, making it barely noticeable while effectively removing moisture and odors. The integrated LED light provides illumination for your bathroom space.

Figure 5: The BEL6 fan installed in a bathroom ceiling.

7. Mantentzea

Regular cleaning helps maintain optimal performance and appearance. The CleanCover grille offers a seamless design that blends into the ceiling and is easy to clean. Simply remove the grille and wipe it down with a damp cloth. Ensure power is disconnected before any cleaning or maintenance.

Figure 6: The CleanCover grille provides a seamless look and is easy to maintain.

8. Arazoak

If the fan does not operate or the light does not turn on, check the following:

• Ensure the power supply is connected and the circuit breaker is on.
• Egiaztatu kableatu-konexio guztiak ondo finkatuta eta behar bezala instalatuta daudela.
• Check if the LED module is properly plugged into the blower assembly.
• Inspect for any obstructions in the fan or ductwork.

If issues persist, consult a qualified electrician or contact Broan-NuTone customer support.

9. Zehaztapenak

Figure 7: Dimensions of the BEL6 fan unit.

10. Bermea eta Laguntza

For warranty information, technical support, or replacement parts, please refer to the official Broan-NuTone webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzura. Gorde erosketa-agiria berme-erreklamazioetarako.