1. Sarrera
This user manual provides comprehensive instructions for the Behringer Feedback Destroyer Pro FBQ2496, an ultra-high performance 2-channel 24-bit/96 kHz Feedback Destroyer and Parametric EQ. It is designed to automatically and intelligently locate and destroy feedback frequencies, ensuring optimal audio quality in live sound and studio environments.
Please read this manual thoroughly before operating the device to ensure proper setup, operation, and maintenance.
1. irudia: Aurrealdeko panela view of the Behringer Feedback Destroyer Pro FBQ2496, showing controls and displays.
2. Segurtasun-argibide garrantzitsuak
- Elikatze-iturria: Erabili zehaztutako elikatze-iturria soilik. Ziurtatu bolumenatage matches the device's requirements (100 - 240 V~).
- Aireztapena: Do not block ventilation openings. Install according to manufacturer's instructions.
- Ura eta hezetasuna: Ez erabili aparatu hau uraren ondoan, ezta tantaka edo zipriztinen eraginpean jarri ere.
- Beroa: Ez instalatu bero-iturri inongo ondoan, esate baterako, erradiadoreak, bero-erregistroak, sukaldeak edo beste aparatu batzuk (barne ampberoa sortzen duten argitzaileak).
- Zerbitzua: Jarri zerbitzu-zerbitzu guztiak zerbitzu-pertsonal kualifikatuari. Zerbitzua behar da aparatua edozein modutan hondatu denean, hala nola, elikatze-kablea edo entxufea hondatuta dagoenean, likidoa isuri denean edo objektuak aparatura erori direnean, aparatua euria edo hezetasuna jasan duenean, ez du normalean funtzionatzen. , edo erori egin da.
3. Konfigurazioa
3.1 Desontziratzea eta ikuskatzea
Carefully unpack the FBQ2496 and inspect it for any signs of damage during transit. If any damage is found, contact your dealer immediately.
3.2 Rack-en muntaketa
The FBQ2496 is designed for standard 19-inch rack mounting. Ensure adequate ventilation around the unit when installing it in a rack.
3.3 Konexioak
The FBQ2496 features balanced inputs and servo-balanced outputs with 1/4'' TRS and gold-plated XLR connectors. Connect your audio source (e.g., mixer output) to the inputs and your amplifier or next processing unit to the outputs.
- Audio Sarrerak: Use balanced XLR or 1/4" TRS cables for optimal signal integrity.
- Audio irteerak: Konektatu zure boterearekin amplifier or next device in the signal chain using balanced XLR or 1/4" TRS cables.
- MIDI konexioak: The unit supports extensive MIDI implementation for remote control and firmware updates. Connect MIDI IN/OUT to your MIDI interface or controller.
- Potentzia-konexioa: Connect the supplied power cord to the AC inlet on the rear panel and to a suitable power outlet. The internal switch-mode power supply supports 100 - 240 V~.
4. Funtzionamendu-argibideak
4.1 Aurrealdeko panela gainditzeaview
2. irudia: Xehetasuna view of the FBQ2496 front panel controls.
- Maila-neurgailua: Displays input/output signal levels for both channels. The CLIP indicator illuminates when the signal is too high.
- IKASI botoia: Activates the automatic feedback detection and suppression process.
- PANIC botoia: Immediately engages maximum feedback suppression in emergency situations.
- Channel Displays (1/L & 2/R): Show the active filters for each channel. Up to 20 filters per channel can be set.
- Bistaratze digitala: Shows parameter values, menu options, and filter numbers.
- Parametric EQ Controls (GAIN, FREQUENCY, BANDWIDTH, PEQ): Used for manual adjustment of parametric filters.
- Kodetzaile birakaria: Navigates menus and adjusts parameter values.
- POWER botoia: Unitatea piztu / itzali egiten du.
4.2 Funtzionamendu moduak
The FBQ2496 offers several operating modes to suit different applications:
- Modu automatikoa: Continuously monitors the mix and automatically sets filters to suppress feedback. This is the "set-and-forget" default setting.
- Single-Shot Mode: Automatically detects and destroys feedback, then locks the filters until they are manually reset. This is useful for ringing out a room before a performance.
- Manual Mode (Parametric EQ): Allows individual programming of up to 40 fully-parametric filters with adjustable frequency, bandwidth, and gain. This mode is ideal for precise sound shaping.
4.3 Basic Feedback Suppression (Auto Mode)
- Ensure all connections are secure and the unit is powered on.
- Set your mixer's output levels to a moderate level.
- Sakatu IKASI button to activate Auto Mode. The unit will begin analyzing the audio signal.
- Gradually increase the microphone gain until feedback starts to occur. The FBQ2496 will quickly identify and suppress the feedback frequencies.
- The unit will automatically set ultra-narrow FBQ filters to eliminate the feedback while preserving the sonic quality of your signal.
- For immediate feedback emergencies, press the IKARA botoia.
5. Mantentzea
The Behringer FBQ2496 requires minimal maintenance. Follow these guidelines to ensure its longevity:
- Garbiketa: Garbitu unitatea zapi leun eta lehor batekin. Ez erabili garbitzaile likidorik edo aerosolik.
- Aireztapena: Ensure that the ventilation slots are free from dust and obstructions.
- Biltegiratzea: Unitatea denbora luzez gordetzen baduzu, deskonektatu korrontetik eta gorde leku fresko eta lehor batean.
- Firmware eguneraketak: Check the official Behringer website periodically for any available firmware updates. Updates can typically be performed via the MIDI interface.
6. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Botererik ez | Power cable disconnected; faulty power outlet. | Check power cable connection; try a different power outlet. |
| Ez dago audio irteerarik | Incorrect cable connections; unit in Bypass mode; input signal too low. | Verify all audio cable connections; ensure unit is not in Bypass mode; increase input signal level. |
| Feedback not suppressed | LEARN mode not active; filters are full; extreme acoustic conditions. | Activate LEARN mode; reset filters if necessary; adjust microphone placement or gain. |
| Audio distortsionatua | Input signal too high (clipping); faulty cables. | Reduce input signal level (check CLIP indicator); replace cables. |
7. Zehaztapen Teknikoak
- Eredua: FBQ2496
- Mota: 2-channel Feedback Destroyer / Parametric EQ
- Sampling Tarifa: 96 kHz
- A/D & D/A Conversion: 24 bit / 96 kHz
- DSP: 32 bitekoa
- Feedback Filters: Up to 40 FBQ filters (20 per channel)
- Iragazki mota: Ultra-narrow notch filters (up to 1/60th of an octave)
- Konektoreak: Balanced 1/4'' TRS and gold-plated XLR inputs/outputs, MIDI In/Out/Thru
- Elikatze-iturria: Internal switch-mode power supply (100 - 240 V~)
- Neurriak (H x W x D): 1.75" x 19.02" x 8.54" (44.5 mm x 483 mm x 217 mm)
- Pisua: 5.86 lb (2.66 kg)
- Kolorea: Zilarrezkoa
- Materiala: Metalezko plastikoa
8. Bermea eta Laguntza
8.1 Bermearen informazioa
Behringer produktuak berme mugatu batek estaltzen ditu. Bermearen baldintza zehatzak ikusteko, kontsultatu zure produktuarekin batera datorren berme-txartela edo bisitatu Behringer-en webgune ofiziala. webgunea.
8.2 Laguntza Teknikoa
For technical assistance, product registration, or to download the latest drivers and firmware, please visit the Behringer support page on their official webgunea. Maiz egiten diren galderak eta bezeroarentzako arreta-zerbitzuko harremanetarako informazioa ere aurki ditzakezu bertan.
Sareko baliabideak:
- Behringer ofiziala Webgunea: www.behringer.com
- Product Support Page: Refer to the Behringer website for specific product support.
