Sarrera
The Behringer ULTRATONE K3000FX is a versatile 300-Watt, 4-channel PA system and keyboard amplifier designed for robust sound reproduction. It features a powerful 15-inch BUGERA woofer and a custom-made 1-inch driver, an integrated digital effects processor, and the FBQ Feedback Detection System. This manual provides essential information for the proper setup, operation, and maintenance of your K3000FX ampbiziagoa.
Segurtasun-argibide garrantzitsuak
- Irakurri arretaz argibide hauek unitatea erabili aurretik.
- Gorde jarraibide hauek etorkizuneko erreferentzia izateko.
- Jarraitu produktuan eta eskuliburu honetan dauden abisu guztiei.
- Jarraitu argibide guztiak funtzionamendu segururako.
- Ez erabili aparatu hau uraren ondoan edoamp inguruneak.
- Garbitu zapi lehor batekin bakarrik.
- Ez blokeatu aireztapen-irekidurak. Instalatu fabrikatzailearen argibideen arabera.
- Ez instalatu bero-iturri inongo ondoan, esate baterako, erradiadoreak, bero-erregistroak, sukaldeak edo beste aparatu batzuk (barne ampberoa sortzen duten argitzaileak).
- Ez zapaldu polarizatutako edo lurreko entxufearen segurtasun-helburua. Entxufe polarizatu batek bi pala ditu, bata bestea baino zabalagoa dutenak. Lurreratze-motako entxufe batek bi pala eta lurreko hirugarren ahoa ditu. Pala zabala edo hirugarren ahoa zure segurtasunerako eskaintzen dira. Emandako entxufea zure entxufean sartzen ez bada, kontsultatu elektrizista bati zaharkituta dagoen entxufea ordezkatzeko.
- Babestu korronte-kablea oinez ibiltzetik edo atxilotzetik, batez ere entxufeetan, erosotasun-harguneetan eta aparatutik irteten diren puntuetan.
- Erabili soilik fabrikatzaileak zehaztutako eranskinak/osagarriak.
- Erabili fabrikatzaileak zehaztutako edo aparatuarekin saltzen den saskiarekin, euskarria, tripodea, euskarria edo mahaiarekin soilik. Orga bat erabiltzen denean, kontuz ibili saskia/aparatuaren konbinazioa mugitzean, iraultzeagatik zauririk ez izateko.
- Deskonektatu aparatu hau tximista-ekaitzetan edo denbora luzez erabiltzen ez duzunean.
- Jarri zerbitzu-zerbitzu guztiak zerbitzu-pertsonal kualifikatuari. Zerbitzua behar da aparatua edozein modutan hondatu denean, hala nola, elikatze-kablea edo entxufea hondatuta dagoenean, likidoa isuri denean edo objektuak aparatura erori direnean, aparatua euria edo hezetasuna jasan duenean, ez du normalean funtzionatzen. , edo erori egin da.
Konfigurazioa
Despaketatzea eta ikuskatzea
Carefully unpack your K3000FX amplifier. Inspect the unit for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately. Retain the original packing materials for future shipping or storage.
Kokatzea
Jarri amplifier on a stable, level surface. Ensure adequate ventilation around the unit. Avoid placing it in direct sunlight or near heat sources. The K3000FX also features an integrated 35-mm pole socket for stand mounting, allowing it to be used as a PA system.
1. irudia: Aurrealdea view of the K3000FX ampbiziagoa.
Konexioak
The K3000FX offers multiple input and output options for various applications.
Figure 2: Rear panel connections of the K3000FX ampbiziagoa.
- Potentzia-konexioa: Konektatu emandako elikatze-kablea atzeko paneleko korronte alternoko sarrerara eta gero entxufe egoki batera.
- Channel Inputs (1-4): Each channel features 1/4" stereo inputs. Channel 1 also includes an additional XLR microphone input for direct connection of dynamic microphones.
- CD sarrera: Use the RCA (phono) inputs to connect an external audio source like a CD player or MP3 player for playback or practicing along.
- Aurikularretarako irteera: Connect headphones to the dedicated 1/4" stereo headphone jack for quiet practicing.
- DI irteera: The balanced stereo XLR DI output with a Ground Lift switch allows for direct connection to a mixing console or external PA system.
- Esteka irteera: Connect this output to a slave amplifier (e.g., another K3000FX) for true stereo operation or to expand your sound system.
- Subwoofer irteera: Connect an active subwoofer to this output for enhanced low-end power.
Funtzionamendu-argibideak
Piztu/Itzaltzea
Ensure all connections are secure before powering on. Turn the MASTER VOLUME control to its minimum setting. Press the POWER switch to turn on the unit. Wait a few seconds for the amplifier to stabilize before increasing the volume. To power off, reverse this procedure.
Kanalaren funtzionamendua
The K3000FX features four independent stereo channels, each with dedicated controls:
- Bolumen kontrola: Kanal bakoitzaren sarrera-maila doitzen du.
- FX Send Control: Determines the amount of signal sent from each channel to the internal digital effects processor.
- Channel 1 XLR Input: For connecting dynamic microphones.
Efektu Digital Prozesadorea
The integrated 24-bit digital FX processor offers 100 presets, including reverb, chorus, flanger, delay, pitch shifter, and various multi-effects. Use the FX program selector to choose your desired effect. The FX RETURN level in the Main section controls the overall wet/dry mix of the effects.
FBQ Feedback detektatzeko sistema
The revolutionary FBQ Feedback Detection System instantly reveals critical frequencies that cause feedback. When feedback occurs, the corresponding LED on the 7-band graphic EQ will illuminate, indicating which frequency band needs adjustment to eliminate the feedback.
7-Bandeko EQ grafikoa
Use the dedicated 7-band graphic equalizer to shape your sound. Adjust the sliders for each frequency band to boost or cut specific frequencies, optimizing the amplifier's output for your instrument and acoustic environment. The FBQ system works in conjunction with this EQ.
Main Section Controls
- FX itzulera maila: Controls the overall level of the effects returned to the main mix.
- Master bolumena: Irteerako bolumen orokorra doitzen du ampbiziagoa.
- Telefonoen maila: Entzungailuen irteeraren bolumena kontrolatzen du.
- Shape Switch: Engages a specific equalization curve for a quick tonal adjustment.
Mantentzea
Garbiketa
Garbitu amplifier's exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish. Ensure no liquids enter the unit.
Biltegiratzea
gordez gero amplifier for an extended period, ensure it is in a dry, dust-free environment. It is recommended to use the original packaging for protection.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Ez dago soinu irteerarik. |
|
|
| Soinu distortsionatua. |
|
|
| Feedback (howling sound). |
|
|
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Irteera Wattage | 300 Watt |
| Bozgorailuaren konfigurazioa | 15-inch BUGERA Woofer, 1-inch Custom Driver |
| Kanalak | 4 Stereo Channels |
| Digital FX Processor | 24-bit, 100 Presets (Reverb, Chorus, Flanger, Delay, Pitch Shifter, Multi-effects) |
| Berdinketa | 7-band Graphic EQ with FBQ Feedback Detection System |
| Sarrerak | 1/4" Stereo (Channels 1-4), XLR Mic (Channel 1), RCA (CD Input) |
| Irteerak | Balanced Stereo XLR DI, 1/4" Headphone, Link, Subwoofer |
| Energia iturria | Kable elektrikoa |
| Neurriak (H x W x D) | 26.77 x 19.49 x 24.02 hazbete (gutxi gorabehera) |
| Pisua | 70.11 libera (gutxi gorabehera) |
| Muntatze Mota | Pole Mount (35mm socket) |
Bermea eta Laguntza
Bermeari eta baldintza zehatzei buruzko informazio gehiago lortzeko, kontsultatu zure produktuarekin batera datorren berme-txartela edo bisitatu Behringer-en webgune ofiziala. website. For technical support, service, or spare parts, please contact Behringer customer service through their official channels. Ensure you have your product model number (K3000FX) and serial number ready when contacting support.
Fabrikatzailea: Behringer AEB
Modelo zenbakia: K3000FX
