1. Segurtasun-argibide garrantzitsuak
Please read these instructions carefully before installation and use. Failure to follow these instructions may result in property damage, personal injury, or death.
- This appliance must be installed by a qualified electrician and plumber in accordance with all local and national regulations.
- Ensure the electrical supply matches the specifications of the appliance (230 V, 3.5 kW).
- Do not operate the appliance if it is damaged or not functioning correctly.
- Do not block the water outlet or tamper presio arintzeko balbularekin.
- This unit is designed for pressureless operation. Only use the special mixer tap supplied with the unit.
- Mantendu haurrak gailutik urrun funtzionatzen ari diren bitartean.
- Deskonektatu elikadura hornidura edozein mantentze edo garbiketa egin aurretik.
2. Produktua amaitu daview
The CLAGE M3/SMB is a compact, hydraulically controlled small instantaneous water heater designed for over-sink installation. It provides hot water instantly for a single tap, making it ideal for hand washing or small dishwashing tasks. The unit features an effective bare-wire heating system (IES®) and comes with a special mixer tap for wall connection.
This image displays the CLAGE M3/SMB small instantaneous water heater unit mounted above a chrome-finished mixer tap. The water heater unit is a compact, rectangular, silver-colored device designed for over-sink installation. The mixer tap features two control knobs and a curved spout.
3. Zehaztapen Teknikoak
| Zehaztapena | Balioa |
|---|---|
| Modelo zenbakia | M3/SMB |
| Potentzia Irteera | 3.5 kW |
| Bolumen nominalatage | 230 V |
| Konexio elektrikoa | 1 AC/N/PE, Plug-ready |
| Neurriak (H x W x D) | 135 x 186 x 87 mm |
| Pisua | Gutxi gorabehera. 1.92 kg |
| Babes Klasea | IP 25 |
| Ur-konexioak | 3/8 hazbetekoa |
| Funtzionamendu-presioa | Pressureless |
| Muntatze Mota | Wall-mounted, Over-sink |
4. Instalazioa (Konfigurazioa)
Instalazioa profesional kualifikatu batek egin behar du.
4.1 Paketatzea
- Kontu handiz kendu osagai guztiak ontzitik.
- Check for any visible damage. Do not install if damaged.
- Ensure all parts listed in the packing contents are present.
4.2 Unitatea muntatzea
- Select a suitable wall location directly above the sink, ensuring sufficient space for maintenance and operation.
- Use the variable metal wall bracket to mark drilling points.
- Zuloak egin eta hormako tapoi egokiak sartu.
- Securely fasten the wall bracket to the wall.
- Mount the water heater unit onto the bracket.
4.3 Ur-konexioa
- Connect the cold water supply to the designated inlet on the mixer tap (usually marked blue).
- Connect the hot water outlet from the unit to the designated inlet on the mixer tap (usually marked red).
- Ensure all connections are tight to prevent leaks. Use appropriate sealing materials.
- Open the main water supply and check for leaks.
- Before electrical connection, flush the unit by opening the tap until water flows freely and air is expelled.
4.4 Konexio elektrikoa
- Ensure the main power supply is switched off at the circuit breaker.
- Connect the appliance to a dedicated 230 V, 3.5 kW electrical circuit. The unit is plug-ready.
- Verify proper grounding.
- Once connections are secure, switch on the main power supply.
5. Funtzionamendua
5.1 Lehen erabilera
- After installation and electrical connection, ensure the unit is completely filled with water by opening the cold water tap until water flows steadily.
- Turn the hot water knob on the mixer tap. The heating element will activate, and hot water will begin to flow after a short delay.
- Adjust the water temperature by mixing hot and cold water using the mixer tap controls.
5.2 Eguneroko erabilera
- To obtain hot water, turn the hot water knob on the mixer tap. The unit will heat water as it flows through.
- To obtain cold water, turn the cold water knob.
- Adjust the flow rate and temperature as desired using the tap controls.
- The unit is designed for continuous flow within its specified capacity.
6. Mantentzea
Regular maintenance ensures optimal performance and longevity of your CLAGE M3/SMB water heater.
- Kanpoaldea garbitzea: Garbitu unitatearen kanpoaldea leun batekin, damp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
- Deskalifikazioa: Depending on water hardness, limescale can build up in the heating system. If you notice a decrease in hot water flow or temperature, the unit may need descaling. This procedure should be performed by a qualified technician.
- Konexioak egiaztatzea: Periodically inspect water and electrical connections for any signs of leaks or wear.
- Mixer Tap Maintenance: Clean the aerator of the mixer tap regularly to remove any debris or limescale buildup that might restrict water flow.
7. Arazoak
Bezeroarentzako arreta-zerbitzuarekin harremanetan jarri aurretik, mesedez, kontsultatu arazoak konpontzeko gida hau:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Ur berorik ez | Ez dago elikadura hornidurarik Ur-emaria baxuegia Berogailuaren akatsa | Check circuit breaker and power connection Increase water flow at the tap Jarri harremanetan teknikari kualifikatuarekin |
| Low hot water flow | Aireztagailu itxia Kare-metaketa Uraren presio nahikoa | Garbitu airezgailua Descale unit (professional service) Check main water supply pressure |
| Unitatetik edo konexioetatik ura isurtzen | Konexio solteak Zigiluak hondatuta Barne matxura | Konexioak estutu (ez gehiegi estutu) Replace seals (professional service) Jarri harremanetan teknikari kualifikatuarekin |
| Ura ez da nahikoa beroa | Ur emaria altuegia Kare-metaketa | Reduce water flow at the tap Descale unit (professional service) |
If the problem persists after attempting these solutions, please contact a qualified technician or CLAGE customer support.
8. Bermea eta Laguntza
For warranty information, technical support, or spare parts, please refer to the official CLAGE website or contact your local CLAGE dealer. Keep your purchase receipt as proof of purchase.
