Sarrera
Thank you for choosing the Codelocks CL1005 Standard Vertical Cabinet Lock. This keyless digital lock provides secure access for cabinets and lockers. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your lock.

Image: Codelocks CL1005 Standard Vertical Cabinet Lock. This image displays the front view of the CL1005 lock, showing the keypad and the main body.
Konfigurazioa eta instalazioa
The CL1005 lock is designed for easy installation and can serve as a quick retrofit for existing cam locks or for new installations on units without a lock. It fits doors up to 1/2 inch (12.7 mm) thick and features a 5/8 inch (15.8 mm) threaded barrel.
Paketearen edukia:
- CL1005 Lock Body
- Torlojuak muntatzea
- Instalazio txantiloia
- 2 x AAA bateria
- Cam (pre-installed or separate)
Instalazio urratsak:
- Atea prestatu: Use the provided template to mark and drill the necessary holes on the cabinet door. Ensure the door thickness does not exceed 1/2 inch (12.7 mm).
- Insert Lock Body: Insert the threaded barrel of the lock body through the prepared hole from the front of the cabinet door.
- Secure Lock Body: From the inside of the cabinet, place the mounting plate over the threaded barrel and secure it with the provided nut. Tighten firmly.
- Install Cam: Attach the appropriate cam to the back of the lock mechanism using the provided screw. Ensure the cam rotates freely and engages with the cabinet frame when locked.
- Instalatu bateriak: Open the battery compartment cover on the back of the lock. Insert the 2 x AAA batteries, observing the correct polarity (+/-). Close the cover securely.
- Proba funtzionamendua: Before closing the cabinet, test the lock with the default code (refer to the operating instructions for default code and programming).
Funtzionamendu-argibideak
The CL1005 lock operates using a user-programmable code. It is powered by 2 x AAA batteries, providing approximately 15,000 openings.
Blokeoa irekitzea:
- Enter your 4-6 digit user code.
- The lock will emit a confirmation tone and the LED will flash green.
- Turn the knob to the unlocked position.
- Ireki armairuko atea.
Itxiera eta blokeoa:
- Itxi armairuko atea.
- Turn the knob to the locked position. The lock will automatically engage.
Changing the User Code:
Refer to the specific programming instructions provided with your lock for detailed steps on changing the user code and master code. Generally, this involves entering a programming sequence followed by the new code.
Battery Failure Override:
In case of battery failure, the lock can be temporarily powered using a 9V battery. Locate the two contact points (LEDs) on the front of the lock. Apply the 9V battery across these points (positive to positive, negative to negative). While holding the 9V battery in place, enter the Master Code to open the lock. Replace the internal AAA batteries immediately after gaining access.
Mantentzea
Bateria ordezkatzea:
When the batteries are low, the lock may emit a warning signal (e.g., multiple beeps or a red LED flash) upon code entry. Replace the 2 x AAA batteries promptly to ensure continuous operation. Always use high-quality alkaline batteries.
- Open the battery compartment cover on the back of the lock.
- Kendu bateria zaharrak.
- Insert new 2 x AAA batteries, ensuring correct polarity.
- Itxi bateriaren konpartimenduaren estalkia ondo.
Garbiketa:
Garbitu giltzarrapoaren kanpoaldea oihal leun eta lehor batekinamp zapirik gabe. Saihestu garbitzaile urratzaileak, disolbatzaileak edo produktu kimiko gogorrak erabiltzea, hauek akabera eta osagai elektronikoak kaltetu baititzakete.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Lock does not respond to code entry. |
|
|
| Lock opens but does not stay locked. |
|
|
| Lock emits warning beeps/flashes. | Bateria baxua. | Replace the 2 x AAA batteries immediately. |
Zehaztapenak
- Eredua: CL1005
- Marka: Codelocks
- Blokeo mota: Keypad, Keyless
- Ezaugarri berezia: Giltzarik gabeko sarrera
- Potentzia: 2 x AAA bateria (hornituta)
- Bateriaren iraupena: Approximately 15,000 openings
- Atearen lodiera: Gehienez 1/2 hazbete (12.7 mm)
- Kupelaren tamaina: 5/8 inch (15.8 mm) threaded
- Neurriak (L x W x H): 6 x 2.5 x 1.5 hazbete (152 x 63.5 x 38.1 mm)
- Pisua: 16 ontza (0.45 kg)
- Amaiera: Silver Grey (Painted)
- Kontrol-metodoa: Ukitu
- Estiloa: Modernoa
Bermea eta laguntza
For warranty information, technical support, or further assistance with your Codelocks CL1005, please refer to the official Codelocks webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. Gorde erosketa-agiria erosketaren frogagiri gisa.
Codelocks Official Webgunea: www.codelocks.com





