1. Sarrera
This manual provides detailed instructions for the installation, operation, and maintenance of your Arc Audio FD2200 2-Channel Car Amplifatzailea. Irakurri arretaz eskuliburu hau instalatu edo erabili aurretik. ampfuntzionamendu egokia eta segurtasuna bermatzeko lifijadorea.
2. Segurtasun informazioa
Beti beti segurtasun-neurri hauek:
- Deskonektatu ibilgailuaren bateria konexio elektrikoak egin aurretik.
- Ziurtatu kableatu guztia behar bezala bideratuta eta finkatuta dagoela kalteak edo zirkuitulaburrak saihesteko.
- Saihestu instalatzea ampLikidorea eguzki-argiaren, bero gehiegiaren, hezetasunaren edo hautsaren eraginpean dauden lekuetan.
- Erabili kableatu egokia elikatze eta lurrerako konexioetarako, gehiegi berotzea saihesteko.
- Consult a professional installer if you are unsure about any aspect of the installation.
3. Produktua amaitu daview
The Arc Audio FD2200 is a high-performance 2-channel car amplifier designed to deliver clear and powerful audio. It features robust construction and advanced protection circuits.
Image 1: Arc Audio FD2200 2-Channel Car Amplifier. This image displays the top view ren ampbizitzailea, erakustaldiaasing its black and silver casing with the Arc Audio logo and model number.
Ezaugarri nagusiak:
- 12dB stereo crossover with x10 range switch (55Hz to 5.5KHz)
- High/low/full range selector switch
- Mono/stereo/bridged select feature
- 18dB bass control at 45Hz
- Protection against reverse voltage, liburuaren gaineantage, speaker short, and thermal overload
- Eraikuntza astunekoa
4. Konfigurazioa eta instalazioa
Instalazio egokia ezinbestekoa da errendimendu eta segurtasun optimoa lortzeko. Gomendagarria da hau edukitzea ampprofesional kualifikatu batek instalatutako argigailua.
4.1 Muntatzeko kokapena
Aukeratu muntatzeko kokapen bat:
- Leku lehorra eta ondo aireztatua.
- Eguzki-argitik eta gehiegizko berotik babestuta.
- Segurua eta bibrazioetatik librea.
- Kableatu eta doikuntzak egiteko eskuragarri.
4.2 Kableatutako konexioak
Jarraitu jarraibide hauek konexio elektrikoetarako:
- Potentzia (B+): Connect a fused power cable directly from the positive terminal of the vehicle's battery to the amplifier's B+ terminal. Ensure the fuse is located within 18 inches of the battery.
- Lurra (GND): Connect a short, heavy-gauge ground cable from the ampkonektatu bizigarriaren GND terminala ibilgailuaren xasiseko metalezko gainazal garbi eta margotu gabe batera.
- Urruneko (REM): Konektatu urrutiko pizte-kable bat zure unitate nagusiaren urrutiko irteeratik ampbizigarriaren REM terminala.
- RCA sarrerak: Konektatu RCA kableak zure unitate nagusiaren aurre-konexiotik.amp irteerak amplifier-aren RCA sarrera-konektoreak.
- Bozgorailuaren irteerak: Konektatu bozgorailuen kableak amplifier's speaker terminals to your speakers. Observe correct polarity (+ to + and - to -).
5. Funtzionamendu-argibideak
Behin instalatuta, amplifier requires proper configuration for optimal audio performance.
5.1 Irabaziaren doikuntza
Irabazi-kontrola bat dator amplifier's input sensitivity to the output of your head unit. Start with the gain set to minimum and slowly increase it until you hear distortion, then back off slightly.
5.2 Gurutzaketa ezarpenak
Use the 12dB stereo crossover with the x10 range switch to set the desired frequency range for your speakers. The high/low/full range selector switch allows you to choose the appropriate mode:
- Pasa altua: Filters out low frequencies, suitable for full-range speakers or tweeters.
- Behe pasea: Filters out high frequencies, suitable for subwoofers.
- Sorta osoa: Allows all frequencies to pass through, typically used for full-range speakers without a separate subwoofer.
5.3 Baxu-igoera
The 18dB bass control at 45Hz can be used to enhance low-frequency output. Use this feature sparingly to avoid distortion and potential speaker damage.
5.4 Mono/Stereo/Bridged Select
This switch allows you to configure the amplifier for different output modes:
- Stereo: Standard 2-channel operation for two speakers.
- Mono: Combines both channels into a single output, typically for a single subwoofer.
- Zubia: Combines the power of both channels into a single, higher-power output, usually for a single, high-power subwoofer. Refer to the specifications for bridged power output.
6. Mantentzea
The Arc Audio FD2200 ampLifizer-ek mantentze-lan minimoa behar du epe luzeko errendimendua bermatzeko.
- Mantendu ampGarbigailua garbi eta hautsik eta hondakinik gabe mantendu. Erabili zapi leun eta lehor bat garbitzeko.
- Ziurtatu aireztapen egokia inguruan ampBerotzea saihesteko likitzailea. Ez blokeatu hozte-hegatsak.
- Aldian-aldian egiaztatu kableatu-konexio guztiak estutasuna eta korrosioa duten ikusteko.
7. Arazoak
Zurearekin arazoak badituzu ampbizigarri gisa, jo ezazu honako arazo eta irtenbide ohiko hauetara:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Potentziarik/Soinurik gabe | Blown fuse, loose power/ground/remote wire, ampbabes-moduan dagoen argitzailea. | Check fuses (battery and amplifier). Verify all power, ground, and remote connections are secure. Check for short circuits in speaker wiring. |
| Soinu distortsionatua | Gain set too high, improper crossover settings, poor quality input signal. | Reduce gain. Adjust crossover settings. Check RCA cables for damage. |
| AmpLifter gehiegi berotzea | Inadequate ventilation, impedance too low, prolonged high-power operation. | Ziurtatu aireztapen egokia inguruan amplifizer. Egiaztatu bozgorailuen inpedantzia-bat etortzeak amplifier capabilities. Reduce volume or operating time. |
| Noise/Hissing | Ground loop, poor quality RCA cables, improper gain setting. | Ensure a solid ground connection. Use shielded RCA cables. Adjust gain. |
If the problem persists after attempting these solutions, contact Arc Audio customer support or a qualified service technician.
8. Zehaztapenak
The following are the technical specifications for the Arc Audio FD2200 ampbiziagoa:
- Irteerako potentzia (RMS):
- 100 Watts x 2 @ 4 ohms
- 185 Watts x 2 @ 2 ohms
- 360 Watts x 1 @ 4 ohms (bridged)
- Transient Distortion: <0.1% @ 4 ohms
- Maiztasun-erantzuna: 20Hz - 20KHz
- Signal-to-Noise Ratio (A-weighted): > 98 dB
- Baxu Boost: +18 dB @ 45 Hz
- Sarrerako sentikortasuna: 250mV - 2.5V
- Crossover: 55Hz - 5.5KHz variable 12dB
- Metxa: 45A x 1
- Dimensions (with endcaps): 10 3/8" x 16 3/4" x 2 3/8"
- Dimensions (without endcaps): 10 3/8" x 13 1/2" x 2 3/8"
- Elementuaren pisua: 12 kilo
- liburukiatage: 12 voltio (DC)
9. Bermea eta Laguntza
Arc Audio products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official Arc Audio website. For technical support or service inquiries, please contact Arc Audio customer service directly.
Harremanetarako informazioa:
- Webgunea: www.arcaudio.com (Adibampesteka, benetako esteka alda daiteke)
- Bezeroarentzako arreta: Ikusi webuneko harremanetarako metodoen gunea.
