Sarrera
This manual provides detailed instructions for the installation, operation, and maintenance of your Kingston Brass KB3605BL Vintage 4-Inch Centerset Lavatory Faucet. Please read all instructions carefully before beginning installation to ensure proper function and longevity of your product. This faucet features a classic design with an oil rubbed bronze finish, designed for deck mount, three-hole installations.

Image: The Kingston Brass KB3605BL Vintage 4-Inch Centerset Lavatory Faucet in Oil Rubbed Bronze.
Segurtasun Informazioa
- Itxi beti ur-hornidura nagusia txorrota instalatu edo mantentze-lanak egin aurretik.
- Instalazioan zehar, erabili babes pertsonaleko ekipamendu egokia, hala nola segurtasun-betaurrekoak.
- Instalazio prozesuaren edozein atalen inguruan ziur ez bazaude, kontsultatu iturgin kualifikatu bati.
- Ziurtatu konexio guztiak ondo finkatuta daudela ihesak saihesteko.
Paketearen edukia
Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:
- Lavatory Faucet Assembly
- Muntatzeko Hardwarea
- Matching Pop-Up Drain Assembly
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Modelo zenbakia | KB3605BL |
| Akabera mota | Olioz igurtzitako brontzea |
| Materiala | Letoia |
| Muntatze Mota | Bizkarreko mendia |
| Instalazio mota | Erdiko multzoa |
| Zulo kopurua | 3 |
| Helduleku kopurua | 2 |
| Sorburuaren irismena | 4 hazbete |
| Sorburuaren altuera | 3.5 hazbete |
| Tutuaren garbiketa | 2 hazbete |
| Gehienezko Emaria | 1.8 Gallons Per Minute (6.8 Liters Per Minute) |
| Kartutxo mota | Dura Seal Washerless |
| Ezaugarri Berezia | Pop Up Drain Included |

Image: Dimensional drawing providing precise measurements for installation.
Konfigurazioa eta Instalazioa
This faucet is designed for a 4-inch centerset, three-hole deck mount installation. Follow these general steps:
- Prestatu konketa: Ensure the sink deck is clean and free of debris. The faucet requires three holes, typically 4 inches apart (centerset).
- Txorrotaren gorputza instalatzea: Place the faucet body onto the sink holes. Secure it from underneath the sink using the provided mounting hardware (washers and nuts). Tighten securely but do not overtighten.
- Ur-hornikuntzako hodiak konektatu: Attach the hot and cold water supply lines to the faucet's inlets. Use thread sealant tape on the threaded connections and tighten with a wrench. Connect the other ends to your home's hot and cold water supply valves.
- Install the Pop-Up Drain: Insert the drain body into the sink's drain hole. Apply plumber's putty or silicone sealant around the flange to create a watertight seal. Secure the drain body from underneath with the washer and nut.
- Connect the Pop-Up Rod: Assemble the pop-up rod mechanism according to the diagram. Connect the horizontal pivot rod to the vertical pop-up rod using the clevis strap and screw. Ensure smooth operation of the drain stopper.
- Ihesak egiteko proba: Once all connections are made, slowly turn on the main water supply. Check all connections for leaks. If leaks are detected, tighten the connections as necessary.

Image: Diagram showing the pop-up drain assembly, including the pivot rod, clevis screw, clevis strap, plunger, and pop-up rod.
Funtzionamendua
The Kingston Brass KB3605BL faucet features two handles for controlling water flow and temperature:
- Ur hotza: The right handle controls the cold water supply. Turn it counter-clockwise for ON and clockwise for OFF.
- Ur beroa: The left handle controls the hot water supply. Turn it counter-clockwise for ON and clockwise for OFF.
- Tenperatura kontrola: Adjust the hot and cold handles simultaneously to achieve the desired water temperature.
- Emaria: The faucet delivers a maximum flow rate of 1.8 gallons per minute (GPM) at 60 PSI.
- Hustubide irekigarria: Lift the small rod located behind the faucet spout to close the drain stopper. Push it down to open the drain.
Mantentzea
Proper care will maintain the finish and performance of your faucet:
- Garbiketa: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or polishes that can damage the finish.
- Aireztagailuaren mantentze-lanak: If water flow decreases or becomes irregular, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris, and rinse thoroughly before reattaching.
- Isurien prebentzioa: The faucet uses a drip-free washerless cartridge system. If a leak occurs from the handles, the cartridge may need to be inspected or replaced.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Ur emaria baxua | Aireztagailua itxita; hornidura-balbulak partzialki itxita. | Garbitu aireztagailua; ziurtatu hornidura-balbulak guztiz irekita daudela. |
| Txorrotako isuriak tututik | Kartutxo gastatua. | Ordeztu kartutxoa. |
| Leaks from Handle Base | Loose packing nut; worn O-rings or cartridge. | Tighten packing nut; replace O-rings or cartridge. |
| Uraren tenperaturaren arazoak | Incorrect supply line connections; water heater issues. | Verify hot/cold connections; check water heater. |
Bermearen informazioa
Kingston Brass products come with a generous product warranty. For specific details regarding your faucet's warranty coverage, please refer to the warranty documentation included with your purchase or visit the official Kingston Brass webgunea.
Laguntza
If you require further assistance or have questions not covered in this manual, please contact Kingston Brass customer support. You can typically find contact information on the manufacturer's webgunean edo produktuaren ontzian.
Informazio gehiagorako, bisitatu Kingston Brass Store.





