Eskuliburuak+

Crux SOCGM-17

Crux SOCGM-17 GM Class II Head Unit Replacement Interface Instruction Manual

Model: SOCGM-17

Sarrera

The Crux SOCGM-17 is designed to facilitate the installation of an aftermarket radio in General Motors Class II vehicles. This interface retains essential factory features such as safety and warning chimes, and provides a 12-volt accessory output with retained accessory power (RAP).

Kutxan dagoena

  • Crux SOCGM-17 Interface Module
  • Ibilgailuaren arnesa
  • Aftermarket Radio Harness (for connection to new stereo)

Ibilgailuen bateragarritasuna

The Crux SOCGM-17 is compatible with various General Motors Class II vehicles. Please refer to the image below for a detailed list of supported makes, models, and years.

Crux SOCGM-17 Vehicle Applications List

This image displays a list of compatible vehicles, including Buick (Century, LaCrosse, Rainier, Rendezvous, Terraza), Cadillac (Escalade), Chevrolet (Avalanche, Cavalier, Colorado, Corvette, Express, Impala, Monte Carlo, S-10, Silverado, Silverado Classic, SSR, Suburban, Tahoe, Trailblazer, Uplander, Venture), GMC (Canyon, Envoy, Savana, Sierra, Sierra Classic, Yukon), Hummer (H2, H3), Isuzu (Ascender), Oldsmobile (Alero, Bravada, Silhouette), Pontiac (Aztek, Grand Am, Grand Prix, Montana, Sunfire), Saab (9-7X), and Saturn (Relay) models within specific year ranges.

Instalazio Gida

Segurtasun-neurriak

Before beginning any installation, always disconnect the negative terminal of your vehicle's battery to prevent electrical shorts and damage.

Crux SOCGM-17 Interface Module

This image shows the compact black Crux SOCGM-17 interface module, which is central to retaining factory features.

Kableatu konexioak

The Crux SOCGM-17 includes all necessary harnesses for integration. Match the wires from the aftermarket radio harness to the corresponding wires on the Crux interface harness. Use appropriate connectors (e.g., splice connectors, solder and heat shrink) for secure and reliable connections.

Crux SOCGM-17 Wiring Harness

This image displays the multi-colored wiring harness included with the Crux SOCGM-17, featuring a gray vehicle connector on one end and individual wires for connecting to an aftermarket radio on the other.

  • Connect the main vehicle harness from the Crux interface to the vehicle's factory wiring.
  • Connect the aftermarket radio harness to your new head unit.
  • Ensure all speaker wires, power wires (constant 12V, accessory 12V), ground, and illumination wires are correctly matched and connected.
  • Some wires, such as amplifier turn-on, parking brake sense, or steering wheel control connections, may require specific routing or additional connections depending on your aftermarket radio and vehicle configuration. Consult your aftermarket radio's manual for these specific connections.

Azken Urratsak

Once all wiring connections are made and secured, carefully mount the aftermarket radio into the dashboard. Reconnect the negative terminal of the vehicle's battery.

Probak

Turn on the vehicle's ignition and power on the aftermarket radio. Verify that the radio functions correctly, including audio output, power on/off with ignition, and the retention of factory chimes. Test all vehicle functions that rely on the factory radio, such as door chimes, seatbelt warnings, and turn signal sounds.

Funtzionamendu funtzioak

Atxikitutako Osagarrien Potentzia (RAP)

The SOCGM-17 provides a 12-volt accessory output that includes Retained Accessory Power (RAP). This feature keeps the aftermarket radio powered after the vehicle's ignition is turned off, until the driver's door is opened or the OEM timer ends, whichever occurs first.

Factory Chimes

This interface retains factory safety and warning chimes, ensuring that important vehicle alerts are still audible after the installation of an aftermarket radio.

Argiztapen Irteera

The module provides an illumination output, allowing the aftermarket radio's lighting to synchronize with the vehicle's dashboard illumination.

Arazoak konpontzea

  • Irratiari ez zaio korronterik ematen: Check all power and ground connections. Ensure the vehicle's battery is fully charged and properly connected. Verify the accessory wire is receiving power when the ignition is on.
  • Soinurik ez: Confirm all speaker wires are correctly connected and not shorted. Check the amplifier turn-on wire if your vehicle has a factory amplified system. Ensure the aftermarket radio's volume is up and not muted.
  • Chimes Not Working: Double-check the connections related to the chime module. Ensure the interface module is receiving proper power.
  • Steering Wheel Controls Not Functioning: If your aftermarket radio supports steering wheel controls and you have connected the appropriate wires, refer to your radio's manual for programming instructions.

Zehaztapenak

  • Marka: Gurutza
  • Eredua: SOCGM-17
  • Elementuaren pisua: 5.6 ontza
  • Produktuaren neurriak: 1 x 1 x 1 hazbete
  • liburukiatage: 12 Volt
  • Fabrikatzailearen pieza zenbakia: SOCGM-17

Bermea eta Laguntza

For warranty information or technical support, please contact Crux customer service. Keep your purchase receipt as proof of purchase.

Erlazionatutako dokumentuak - SOCGM-17

Aurreview CRUX SOCGM-17C Irrati Ordezko Interfazea GM Ibilgailuentzat
CRUX SOCGM-17C GM II. Klaseko ibilgailuetarako diseinatutako irrati-ordezko interfazea da, fabrikako ezaugarriak mantenduz. amplified audio systems (Bose/Monsoon), and chime functions when installing an aftermarket radio. Features built-in chime volume adjustment and EIA color-coded wiring for easy installation.
Aurreview CRUX SWRCR-59D Irratiaren Ordezkapena eta Bolantearen Kontrola Mantentzeko Interfazearen Gida
CRUX SWRCR-59D interfazearen gida osoa, Dodge, Fiat, Jeep eta RAM ibilgailu hautatuetan irratia ordezkatzeko duen erabilera zehazten duena, bolantearen kontrolak eta fabrikako ezaugarriak mantenduz. Produktuaren ezaugarriak, piezen zerrenda, instalazio diagramak, arazoak konpontzea, DIP etengailuen ezarpenak, ibilgailuen bateragarritasuna eta Alpine irratietarako argibide espezifikoak barne hartzen ditu.
Aurreview CRUX CS-CR41 irratiaren ordezkoa SWC atxikipenarekin Chrysler, Dodge eta Jeep ibilgailuetarako
CRUX CS-CR41 interfazearen instalazio gida eta ezaugarriak, irratia ordezkatzea ahalbidetzen duena, bolantearen kontrolak (SWC) eta fabrikako ezaugarriak mantenduz Chrysler, Dodge eta Jeep ibilgailu hautatuetan. Kableatu diagramak, arazoak konpontzeko aholkuak eta ibilgailuen bateragarritasuna barne hartzen ditu.
Aurreview CRUX SWRGM-48 Radio Replacement Interface for GM Vehicles
CRUX SWRGM-48: A guide to installing and using the radio replacement interface with steering wheel control retention for select GM Class II vehicles, including features, wiring, and button functions.
Aurreview CRUX SOOGM-15: GM II. Klaseko irratiaren ordezkoa OnStar eta SWC atxikipenarekin
CRUX SOOGM-15 interfazearen instalazio gida eta produktuaren ezaugarriak, GM II. klaseko ibilgailuetarako irrati-ordezko interfazea. Gailu honek fabrikako ezaugarriak mantentzen ditu, hala nola OnStar, bolantearen kontrolak eta audio sistemak, eta, aldi berean, merkatu osteko irrati bat instalatzea ahalbidetzen du.
Aurreview CRUX SWRCR-59D Irratiaren Ordezkapena eta Bolantearen Kontrola Mantentzeko Interfazearen Gida
CRUX SWRCR-59D interfazearen gida osoa, non ezaugarriak, barne hartzen dituen piezak, instalazio diagrama, DIP etengailuen ezarpenak eta ibilgailuen bateragarritasuna zehaztu daitezkeen Dodge, Fiat, Jeep eta RAM ibilgailuentzat. Ikasi bolantearen kontrolak eta fabrikako ezaugarriak nola mantendu ondorengo irrati bat instalatzean.