Intermatic T106R Mechanical Time Switch User Manual

Sarrera

This manual provides instructions for the installation, operation, and maintenance of the Intermatic T106R Mechanical Time Switch. The T106R is designed to control electrical loads up to 40 Amps, offering direct 24-hour control with up to 12 ON/OFF operations per day. It features a minimum ON/OFF time of 1 hour and includes a manual override function. This device is housed in a durable steel enclosure suitable for indoor and outdoor use.

Segurtasun-argibide garrantzitsuak

• OHARRA: Deskarga elektrikoaren arriskua. Deskonektatu korrontea etengailutik edo fusible-kutxatik instalazioa edo mantentze-lanak egin aurretik.
• Installation and servicing should be performed by a qualified electrician in accordance with all national and local electrical codes.
• Do not exceed the maximum electrical ratings of the device.
• Ziurtatu konexio guztiak seguru eta behar bezala isolatuta daudela.
• This device is intended for permanent installation.

Produktua amaituview

The Intermatic T106R Mechanical Time Switch consists of a robust steel enclosure and an internal mechanical timer mechanism.

1. irudia: Aurrealdea view of the Intermatic T106R Mechanical Time Switch with the enclosure door open, revealing the timer dial and wiring terminals. The gray steel housing and yellow timer mechanism are visible.

Ezaugarri nagusiak

• 24 orduko tenporizadore mekanikoa
• Up to 12 ON/OFF operations daily
• Minimum ON/OFF time: 1 hour
• Eskuz gainditzeko etengailua
• 40 Amp karga-ahalmena
• Steel indoor/outdoor enclosure

Instalazio-argibideak

WARNING: Ensure power is disconnected at the main circuit breaker before proceeding with installation.

1. Mounting the Enclosure: Select a suitable location for mounting the timer. The steel enclosure is rated for indoor and outdoor use. Securely mount the enclosure to a flat, stable surface using appropriate hardware through the mounting holes provided.
2. Kableatu konexioak:
   • Ireki itxiturako atea.
   • Identify the input power terminals (LINE) and output load terminals (LOAD).
   • Connect the incoming power supply wires to the LINE terminals.
   • Connect the wires leading to the electrical load (e.g., pump, lighting) to the LOAD terminals.
   • Ensure all connections are tight and follow the wiring diagram located inside the enclosure or in the separate instruction guide.
   • The T106R is designed for 208-277 Volt applications. Verify your supply voltage matches the timer's rating.
3. Itxi eta Seguru: Once wiring is complete and verified, close the enclosure door and secure it.

2 irudia: Gertuko planoa view of the internal components of the Intermatic T106R Mechanical Time Switch, showing the timer dial, wiring terminals, and caution labels. This image highlights the electrical connection points.

Ordu-etengailuaren funtzionamendua

Uneko ordua ezartzea

1. Rotate the large yellow dial clockwise until the current time aligns with the small arrow or indicator mark on the timer mechanism.
2. Ensure AM/PM is correctly set if applicable (this model operates on a 24-hour cycle).

ON/OFF zikloen programazioa

The timer uses trippers (pins) on the dial to activate ON and OFF cycles.

1. Locate the ON (green) and OFF (red) trippers. These are typically small pins that can be pushed in or out, or attached to the dial.
2. Attach or position the ON tripper at the desired time for the load to turn on.
3. Attach or position the OFF tripper at the desired time for the load to turn off.
4. Multiple ON/OFF cycles can be set, up to 12 pairs per 24-hour period. Ensure a minimum of 1 hour between ON and OFF settings.

Eskuzko gainidaztea

The T106R includes a manual override switch, typically a lever or button, that allows you to temporarily turn the load ON or OFF without affecting the programmed schedule.

To use: Move the manual override lever to the desired position (ON or OFF). The timer will resume its programmed schedule at the next scheduled ON or OFF event.

Mantentze-jarraibideak

• Garbiketa: Periodically clean the exterior of the enclosure with a damp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
• Ikuskapena: Annually inspect the wiring connections for tightness and signs of wear or corrosion. Ensure the enclosure door seal is intact.
• Erabiltzaileak ez du zerbitzurik gabeko piezarik: The internal mechanical components are not user-serviceable. If the timer malfunctions, contact a qualified electrician or Intermatic support.

Ohiko arazoak konpontzea

Zehaztapen Teknikoak

• Eredua: T106R
• Marka: Intermatic
• liburukiatage: 208-277 VCA
• Karga-gaitasuna: 40 arte Amps
• Eragiketak: 1-12 ON/OFF cycles per 24 hours
• Gutxieneko PIZTE/ITZALTZE denbora: 1 ordu
• Materiala: Altzairuzko itxitura
• Neurriak (H x W x D): 10.34" x 6.62" x 4"
• Pisua: 3.4 kilo
• Muntaketa: Gainazaleko muntaia
• Aldatu estiloa: SPDT (Polo Bakarreko Bi Jaurtiketa)
• Ziurtagiriak: CSA, UL
• UPC: 078275104280

Bermea eta Laguntza

The Intermatic T106R Mechanical Time Switch comes with a 1-year limited warranty. This warranty covers defects in materials and workmanship. In the event of a defect, the unit will be replaced. Labor costs are not covered.

For warranty claims or technical support, please contact Intermatic customer service. Refer to the official Intermatic webuneko harremanetarako informazioa lortzeko gunea.

Sareko baliabideak: For additional information, wiring diagrams, or FAQs, visit the official Intermatic webgunea: www.intermatic.com