Intermatic EI400WC Electronic Auto-Off Timer

1. Sarrera

The Intermatic EI400WC Electronic Auto-Off Timer is designed to provide convenient and energy-efficient control over various electrical loads. This in-wall timer allows for precise countdown timing from 1 second to 24 hours, making it suitable for a wide range of applications including lighting, fans, and appliances. Its user-friendly interface and robust design ensure reliable operation.

2. Segurtasun informazioa

WARNING: Risk of Electric Shock. May result in serious injury or death. Turn power OFF at circuit breaker before installing.

• Instalazioa elektrizista kualifikatu batek edo langile trebatuek egin behar dute.
• Ziurtatu tokiko eta nazioko araudi elektriko guztiak betetzen direla.
• Do not use with sunlamps, saunak, edo zauri pertsonalak eragin ditzaketen zamak, okerreko ordutegian.
• Verify that the timer's voltage and current ratings are compatible with your application.
• Gailu hau barrualdean erabiltzeko bakarrik dago pentsatuta.

3. Paketearen edukia

• Intermatic EI400WC Electronic Auto-Off Timer
• Muntatzeko Torlojuak
• Hari intxaurrak
• Argibide eskuliburua (dokumentu hau)

4. Instalazioa

The EI400WC timer is designed for easy installation, compatible with both single-pole and 3-way switch configurations. It does not require a neutral wire connection, simplifying retrofitting.

4.1. Kableatu diagramaview

Below is an image of the Intermatic EI400WC timer, showing its compact design and wiring leads for installation into a standard wall box.

Figure 1: Intermatic EI400WC Electronic Auto-Off Timer with wiring leads.

4.2. Instalazio urratsak

1. Itzali energia: Bilatu ordezkatzen ari zaren etengailua kontrolatzen duen zirkuitu-hauslea eta itzali ezazu. Egiaztatu korrontea itzalita dagoela bolumen-neurgailu bat erabiliz.tage probatzailea.
2. Kendu lehendik dagoen etengailua: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch.
3. Connect the timer:
   • Connect the timer's wires to the corresponding house wires using the provided wire nuts. Refer to the specific wiring diagram for single-pole or 3-way applications.
   • The EI400WC does not require a neutral wire, simplifying connections.
   • Ziurtatu konexio guztiak seguruak direla.
4. Mount the timer: Gently push the connected wires back into the wall box. Secure the timer to the wall box using the mounting screws.
5. Hormako plaka instalatu: Attach the new or existing wall plate over the timer.
6. Berreskuratu indarra: Piztu berriro korrontea etengailu elektrikoan.

4.3. Instalazio bideo gida

For a visual guide on installing and setting up Intermatic in-wall timers, including the EI400 series, please watch the following video. The relevant section for programmable electronic timers begins at 0:55.

5. Konfigurazioa eta programazioa

The EI400WC timer offers simple programming for countdown times from 1 second to 24 hours. Settings are stored in a non-volatile memory.

1. Setting the Countdown Time: Use the '+' and '-' buttons on the timer to adjust the desired countdown duration. The digital display will show the selected time.
2. Tenporizadorea aktibatzea: Press the 'on/off' button once to activate the countdown. The connected load will turn ON and remain on for the programmed duration.
3. Audible/Visual Warning: The timer can be configured to provide a visual or audible warning before the countdown expires and the load turns OFF. Refer to the detailed manual for specific warning setup.
4. Lockable Settings: To prevent unintended changes to the programmed settings, the timer features a lockable setting. Consult the full manual for instructions on enabling/disabling this feature.

6. Funtzionamendu-argibideak

• Starting a Countdown: Once the desired time is set, press the 'on/off' button to begin the countdown. The load will turn ON.
• Stopping the Countdown Early: If you wish to turn off the connected load before the programmed time expires, simply press the 'on/off' button again. The load will turn OFF immediately.
• Tenporizadorea pausatzea: The 'pause' button allows you to temporarily halt the countdown. Press it once to pause, and again to resume.

7. Mantentzea

The Intermatic EI400WC timer is designed for minimal maintenance. The internal CR2 lithium battery provides power for up to three years and is replaceable.

7.1. Bateria ordezkatzea

1. Itzali energia: For safety, turn off power to the timer at the circuit breaker before replacing the battery.
2. Access battery compartment: Locate the battery compartment, usually behind a small cover on the front or side of the timer.
3. Ordeztu bateria: Remove the old CR2 lithium battery and insert a new one, ensuring correct polarity.
4. Close compartment: Itxi bateriaren konpartimentuaren estalkia modu seguruan.
5. Berreskuratu indarra: Piztu berriro korrontea etengailu elektrikoan.

8. Arazoak

If the problem persists after attempting these solutions, please contact Intermatic customer support.

9. Zehaztapenak

• Eredua: EI400WC
• liburukiatage: 120-277 VCA
• Uneko balorazioa: 20 arte Amps
• Tenporizadorearen barrutia: 1 segundotik 24 ordura
• Bateria: 1 x CR2 Lithium (included, replaceable)
• Materiala: Plastikoa
• Kolorea: Zuria
• Neurriak: 4.13 x 1.75 x 1.2 hazbete (Produktuaren neurriak)
• Pisua: 6.08 ontza
• Bateragarritasuna: Single-pole or 3-way switch compatible
• Ziurtagiriak: CSA Ziurtagiria

10. Bermea eta Laguntza

The Intermatic EI400WC Electronic Auto-Off Timer comes with a 5 urteko berme mugatua erosketa-datatik aurrera. Berme honek erabilera eta zerbitzu normaletan material eta fabrikazio akatsak estaltzen ditu.

For warranty claims, technical support, or further assistance, please visit the official Intermatic webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. Gorde erosketaren egiaztagiria bermea balioztatzeko.

Intermatic Official Webgunea: www.intermatic.com