Sarrera
This manual provides detailed instructions for the installation, operation, and maintenance of the Intermatic T1906 SPDT 24-Hour Time Switch. Please read all instructions carefully before installation and use to ensure proper function and safety.
Segurtasun informazio garrantzitsua:
- Always disconnect power at the circuit breaker before installing or servicing the time switch.
- Instalazioa elektrizista kualifikatu batek egin behar du, tokiko eta estatuko arau elektriko guztien arabera.
- This device is designed for indoor use within a 3R steel enclosure.
Produktua amaituview
The Intermatic T1906 is a robust 24-hour time switch designed for automatic control of electrical loads. It features a single-pole, double-throw (SPDT) switch and operates on 208-277 Volts. Key features include:
- Up to 96 operations (48 ON/48 OFF) every 24 hours.
- 15-minute minimum ON/OFF intervals.
- Captive trippers for easy setting.
- Suitable for applications requiring daily repetitive scheduling.
Instalazioa
Segurtasun-neurriak
- Ensure power is OFF at the main service panel before beginning installation.
- Egiaztatu voltage supply matches the time switch rating (208-277V).
- Ground the enclosure properly.
Muntaketa
- Select a suitable indoor location for the 3R steel enclosure, protected from direct weather and excessive moisture.
- Mount the enclosure securely using appropriate fasteners through the pre-drilled holes.
Kableatua
Refer to the wiring diagram provided inside the enclosure cover. The T1906 is an SPDT switch, meaning it has one common terminal and two switched terminals (normally open and normally closed).
- Konektatu sarrerako linea voltage to the designated line terminal.
- Connect the load(s) to the appropriate switched terminals (NO or NC) and the neutral/return line.
- Ziurtatu konexio guztiak estu eta seguru daudela.
- KONTUZ: Make sure non-operating trippers (if any) clear the switch lever.
- GARRANTZITSUA: The insulator must be replaced after wiring to prevent shock.
1. irudia: Barnekoa view of the Intermatic T1906 Time Switch. This image displays the 24-hour clock dial with numerous small, gold-colored captive trippers around its circumference. A central silver hand indicates the current time. Below the dial, a translucent plastic insulator covers wiring terminals, with a warning label visible: "CAUTION: MAKE SURE NON-OPERATING TRIPPERS (IF ANY) CLEAR SWITCH LEVER" and "THIS INSULATOR MUST BE REPLACED AFTER WIRING TO PREVENT SHOCK."
Funtzionamendu-argibideak
Ordua ezartzea
- Biratu diala clockwise only until the current time aligns with the time indicator arrow. The dial is marked with AM and PM hours.
Setting ON/OFF Times
The T1906 uses captive trippers around the dial to set ON and OFF times. Each tripper represents a 15-minute interval.
- To set an ON period, push the trippers outwards for the desired duration.
- To set an OFF period, leave the trippers in their inward position for the desired duration.
- Ensure that the trippers are firmly set in their respective positions (in or out).
- For models with a skipper wheel (if applicable), operations can be omitted on selected days of the week. Refer to the specific instructions for skipper wheel adjustment if your model includes this feature.
Eskuzko gainidaztea
The time switch may include a manual override lever. Consult the specific product diagram for its location and operation. This allows for temporary ON/OFF control without affecting the programmed schedule.
Mantentzea
- The Intermatic T1906 is designed for minimal maintenance.
- Periodically inspect the enclosure for any signs of damage or corrosion.
- Ziurtatu kableatu-konexio guztiak ondo finkatuta daudela.
- Keep the internal components free from dust and debris.
- Do not lubricate any internal parts.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Time switch does not operate. | No power supply; incorrect wiring; faulty motor. | Check circuit breaker and power connections. Verify wiring against diagram. If motor is faulty, contact Intermatic support. |
| Load does not turn ON/OFF at programmed times. | Trippers incorrectly set; time dial not set to current time; faulty switch mechanism. | Ensure trippers are pushed in/out firmly. Verify current time setting. Check for obstructions to the switch lever. |
| Motor hums but dial does not turn. | Obstruction in gear train; motor issue. | Disconnect power and inspect for obstructions. If problem persists, contact Intermatic support. |
If troubleshooting steps do not resolve the issue, contact Intermatic customer support or a qualified electrician.
Zehaztapenak
- Eredua: T1906
- Mota: 24-Hour SPDT Time Switch
- liburukiatage: 208-277 volt
- Itxitura: 3R Indoor Steel Enclosure
- Neurriak (Produktua): 5.5 x 3.5 x 8.25 hazbete inguru
- Pisua: 2 kilo inguru
- Maximum Operations: 96 (48 ON / 48 OFF) per 24 hours
- Gutxieneko PIZTE/ITZALTZE denbora: 15 minutu
- Materiala: Altzairua
- Ziurtagiria: CSA (Canada and US)
Bermearen informazioa
For detailed warranty information, please refer to the manufacturer's official documentation or visit the Intermatic webgunea. Berme-baldintzek normalean materialen eta fabrikazioaren akatsak estaltzen dituzte erosketa-datatik aurrerako denbora-tarte jakin batean.
Bezeroarentzako Arreta
For technical assistance, replacement parts, or further inquiries, please contact Intermatic customer support. You can find contact information on the official Intermatic webgunea edo zure produktuen saltzailearen bidez.
Intermatic Webgunea: www.intermatic.com
