Sarrera
The Taylor Pro Digital 4-Event Timer is designed to track up to four separate timing events simultaneously. This device features a large LCD display for clear visibility and offers versatile placement options with its integrated magnets and built-in stand. It supports countdown timing up to 99 hours, 59 minutes, and 59 seconds, and includes a memory function for recalling previous settings.
1. irudia: Aurrealdea view of the Taylor Pro Digital 4-Event Timer.
Segurtasun Informazioa
WARNING: This product contains button cell batteries. Swallowing a button cell battery can cause severe internal burns in as little as 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
Figure 2: Button cell battery safety warning.
Paketearen edukia
- Taylor Pro Digital 4-Event Timer (Model 5862)
- Argibide eskuliburua
- 2 x Product Specific Batteries (pre-installed or included separately)
Produktuaren Ezaugarriak
- Four Independent Timers: Track up to four events simultaneously.
- Pantaila LCD handia: 0.8-inch display for clear time readings.
- Kokapen polifazetikoa: Strong magnets for metal surfaces and a built-in stand for countertops.
- Extended Countdown: Sets times up to 99 hours, 59 minutes, 59 seconds.
- Distinctive Alarms: Each timer has a unique beep pattern.
- Memoria Funtzioa: Recalls the last set time for each event.
3. irudia: Xehetasuna view tenporizadorearen pantaila eta kontrol botoiak.
Konfigurazioa
Bateriaren instalazioa
- Aurkitu bateriaren konpartimentua tenporizadorearen atzealdean.
- Ireki konpartimenduaren estalkia.
- Insert two product-specific batteries, ensuring correct polarity (+/-).
- Itxi bateriaren konpartimenduaren estalkia ondo.
Hasierako piztea
Once batteries are installed, the timer should automatically power on and display '00:00:00' or the current time if a clock function is present (refer to display for confirmation).
Funtzionamendu-argibideak
Selecting a Timer (T1, T2, T3, T4)
Sakatu T1/T2/T3/T4 buttons to select the desired timer. The active timer will be indicated on the display.
Setting a Countdown Timer
- Select the desired timer (T1-T4).
- Sakatu HR orduak ezartzeko botoia, MIN for minutes, and SEK for seconds. Each press increases the value. Hold the button for faster adjustment.
- To clear a set time, press the ARGI button while the timer is selected and stopped.
Starting and Stopping a Timer
- After setting the desired time, press the HASI/GELDITU botoia atzerako kontaketa hasteko.
- To pause the countdown, press HASI/GELDITU berriz.
- Berrekiteko, sakatu HASI/GELDITU beste behin.
Alarma Funtzioa
When a timer reaches zero, it will emit an audible alarm. Each of the four timers has a distinct alarm sound to help differentiate between events. Press any button to silence the alarm.
Memoria Funtzioa
The timer automatically stores the last set time for each of the four events. To recall a previously set time, select the desired timer (T1-T4) and press the MEMORIA button. The last set time for that specific timer will be displayed.
Mantentzea
Garbiketa
Garbitu tenporizadorea leun batekin, damp oihalik. Ez erabili garbitzaile urratzailerik eta ez murgildu unitatea uretan.
Bateria ordezkatzea
When the display becomes dim or the timer functions erratically, it is time to replace the batteries. Follow the battery installation steps outlined in the Setup section.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Pantaila hutsik edo ilun dago. | Bateria gutxi edo agortuta. | Ordeztu bateriak beste batzuekin, polaritate zuzena ziurtatuz. |
| Tenporizadorea ez da martxan jartzen. | Time not set or START/STOP not pressed. | Ensure a time is set for the selected timer. Press START/STOP. |
| Alarma ez da jotzen ari. | Volume setting too low (if applicable) or timer not reaching zero. | Ensure timer counts down to zero. Check for any mute function (if available). |
| Botoiek ez dute erantzuten. | Bateria gutxi edo barneko matxura. | Aldatu bateriak. Arazoak jarraitzen badu, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. |
Zehaztapenak
- Modelo zenbakia: 5862
- Marka: Taylor
- Materiala: Plastikoa
- Kolorea: Zuria/Berdea
- Elementuaren pisua: 2.4 ontza
- Produktuaren neurriak: 7 x 5.1 x 6.68 hazbete
- Pantailaren tamaina: 0.8 hazbeteko (LCD)
- Tenporizadore kopurua: 4
- Max Countdown: 99 Hours, 59 Minutes, 59 Seconds
- Pilak: 2 Product Specific batteries (required)
Bermea
This Taylor Pro Digital 4-Event Timer (Model 5862) comes with a 1 urteko bermea covering parts and labor from the date of purchase. This warranty does not cover damage caused by misuse, accident, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Laguntza
For further assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Taylor customer support. Refer to the product packaging or the official Taylor webgunea kontaktu-informazio eguneratuena lortzeko.