JBL Stage 602 6-1/2" 2-Way Coaxial Car Audio Speakers User Manual

Sarrera

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JBL Stage 602 6-1/2" 2-Way Coaxial Car Audio Speakers. Please read this manual thoroughly before attempting installation or operation to ensure proper use and optimal performance.

Ezaugarri nagusiak

• Hizlari mota: 6.5" Stage Series 2-Way Coaxial Car Speakers
• Konoa Materiala: Injection-molded polypropylene cone for enhanced durability and sound quality.
• Txiolaria: PEI Balanced Dome Tweeter for clear high-frequency reproduction.
• Inpedantzia: 4 ohms, optimized for compatibility with a wide range of car audio systems.
• Maiztasun-erantzuna: 55 - 22000 Hz, providing a broad audio spectrum.
• Sentikortasuna: 91dB, ensuring efficient power conversion into sound.
• Potentzia manipulazioa: 135W Peak / 45W RMS per speaker.
• Top-Mount Depth: 2-5/16" for flexible installation.

Paketearen edukia

Your JBL Stage 602 speaker package typically includes the following items:

• Two (2) JBL Stage 602 6-1/2" Coaxial Speakers
• Bi (2) bozgorailu-sareta
• Muntatzeko hardwarea (torlojuak, klipak)
• Speaker Brackets (for various mounting options)
• Speaker Foam (for minimizing unwanted sounds/vibrations)
• Owner's Manual / Documentation

Konfigurazioa eta Instalazioa

Proper installation is crucial for optimal sound performance and speaker longevity. If you are unsure about any steps, it is recommended to seek professional assistance.

1. Segurtasun-neurriak

• Deskonektatu ibilgailuaren bateria edozein lan elektriko hasi aurretik.
• Erabili segurtasun-ekipo egokia, begien babesa barne.
• Ensure all wiring is correctly connected to prevent damage to the speakers or vehicle's electrical system.
• Avoid overtightening screws to prevent stripping or damaging mounting surfaces.

2. Instalazioa prestatzen

1. Kendu dauden bozgorailuak: Carefully remove the existing car audio speakers from their mounting locations (e.g., door panels, rear deck). This may involve removing trim panels, screws, and disconnecting wiring.
2. Egiaztatu egokitzapena: Compare the JBL Stage 602 speakers with the original speakers and the mounting location. Use the provided mounting brackets if necessary to ensure a secure fit.
3. Kableatua: Identify the positive (+) and negative (-) speaker wires from your vehicle's audio system. Ensure proper polarity when connecting the new speakers.

3. Bozgorailuaren muntaketa

1. Secure Speakers: Place the JBL Stage 602 speakers into the prepared mounting locations. Use the provided screws to secure them firmly. If using mounting brackets, attach the brackets first, then the speakers to the brackets.
2. Aplikatu aparra: Apply the included speaker foam around the speaker's edge where it meets the mounting surface. This helps to minimize vibrations and improve sound quality by creating a better seal.
3. Konektatu kableatzea: Connect the vehicle's speaker wires to the terminals on the JBL Stage 602 speakers. Ensure the positive (+) wire connects to the positive terminal and the negative (-) wire connects to the negative terminal.
4. Saretak instalatu: If desired, attach the speaker grilles over the speakers.
5. Berriz muntatu: Reassemble any removed trim panels or components.

4. Instalazio-gida orokorra

For a visual guide on upgrading car audio speakers, including insights into speaker components and mounting options, refer to the video below. This video provides general information applicable to JBL GTO series speakers, which share similar installation principles.

Bozgorailuak erabiltzea

Behin instalatuta, zure JBL Stage 602 speakers will operate as part of your vehicle's existing audio system. No specific operational controls are on the speakers themselves.

• Audio iturria: Play audio through your car's head unit (radio, CD player, media player).
• Bolumen kontrola: Adjust the volume using your head unit's controls.
• Tonu kontrolak: Utilize your head unit's equalizer (EQ), bass, treble, and balance/fader controls to fine-tune the sound to your preference. Start with flat settings and make small adjustments.
• Atsedenaldia: Allow a short break-in period (typically 10-20 hours of normal listening) for the speaker components to loosen up and achieve their optimal sound performance.

Mantentzea eta zaintzea

To ensure the longevity and continued performance of your JBL Stage 602 speakers, follow these maintenance guidelines:

• Garbiketa: Gently wipe the speaker grilles and surrounds with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Saihestu gehiegizko indarra: Do not drive the speakers with an amplifier that exceeds their recommended RMS power handling (45W RMS per speaker) to prevent damage.
• Ingurumen-faktoreak: Protect speakers from extreme temperatures, direct sunlight for prolonged periods, and excessive moisture.
• Ohiko ikuskapena: Periodically check the speaker cones and surrounds for any signs of damage or wear.

Arazoak konpontzea

If you experience issues with your speakers, consult the following common troubleshooting steps:

Zehaztapenak

Bermea eta Laguntza

JBL Stage 602 speakers come with a 1 urteko berme mugatua. For warranty claims, technical support, or further assistance, please contact JBL customer service or visit the official JBL webgunea.

For additional product information and support, you may visit the JBL denda Amazonen.