SurgeX SX20 NE/RT Industrial Grade Surge Suppressor Power Conditioner User Manual

1. Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of the SurgeX SX20 NE/RT Industrial Grade Surge Suppressor Power Conditioner. The SX20 NE/RT is designed to protect sensitive electronic equipment from power surges and electrical disturbances, ensuring reliable performance and longevity of connected devices. Please read this manual thoroughly before installation and operation to ensure proper use and safety.

2. Segurtasun informazioa

Adherence to the following safety precautions is essential to prevent injury and damage to the unit or connected equipment.

• Installation must be performed by qualified personnel in accordance with all national and local electrical codes.
• Ensure the main power supply is disconnected before performing any wiring or maintenance.
• The unit is designed for indoor use in a dry environment. Avoid exposure to moisture or extreme temperatures.
• Do not attempt to open or service the unit. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
• Egiaztatu voltage and current ratings of the connected equipment do not exceed the unit's specifications.

3. Produktua amaitu daview

The SurgeX SX20 NE/RT is a robust 20-amp surge suppressor and power conditioner housed in a magnetic shielding NEMA steel enclosure. It features True Series Mode technology for superior surge protection and EMI/RFI filtering. The unit also includes remote turn-on capabilities and a self-test circuit with visual indicators.

Ezaugarri nagusiak

• NEMA rated magnetic shielding steel enclosure.
• 20 Amp load rating at 120 volts AC.
• True Series Mode surge suppression technology.
• Inrush current elimination.
• EMI/RFI filtering.
• Remote turn-on and turn-off via contact closure or applied DC voltage.
• Self-test circuit with visual indicator.
• Irteera boltage source for remote LED status indicator.
• Relay output for control and cascading.

Figure 1: SurgeX SX20 NE/RT Front Panel
This image displays the front panel of the SurgeX SX20 NE/RT unit. Visible elements include the SurgeX logo, 'True Series Mode' and 'Industrial Grade Surge Suppressor Power Conditioner' text, and the model number 'SX20 NE/RT'. Two indicator lights are present: a yellow 'REMOTE' light and a green 'SELF-TEST' light. A circular red-outlined opening is also visible on the lower right side of the front panel. The unit is housed in a grey metallic enclosure with multiple knock-outs on the top and right sides for wiring.

4. Konfigurazioa eta instalazioa

The SurgeX SX20 NE/RT is designed for hardwired installation. Ensure all power is disconnected before proceeding.

4.1 Paketatzea

Carefully remove the unit from its packaging. Inspect for any signs of shipping damage. Report any damage to your supplier immediately.

4.2 Muntaketa

Mount the NEMA enclosure securely to a wall or suitable surface using appropriate fasteners. Ensure adequate ventilation around the unit.

4.3 Kableatutako konexioak

The unit features a barrier strip accessible through knock-outs for hardwiring power input and output connections. Follow these steps:

1. Select appropriate knock-outs for incoming and outgoing power cables.
2. Route the 120V AC input power cable to the designated input terminals on the barrier strip.
3. Route the output power cable(s) for the protected equipment to the designated output terminals.
4. Ensure all connections are secure and properly torqued according to electrical code requirements.
5. Verify correct polarity (Line, Neutral, Ground) for all connections.

4.4 Remote Turn-On Connection

The SX20 NE/RT supports remote turn-on and turn-off. A separate terminal block within the enclosure is provided for this functionality. Connect a contact closure or an applied DC voltage source to activate the remote control feature. Refer to the wiring diagram provided with the unit for specific terminal assignments.

5. Funtzionamendu-argibideak

Once installed and wired, the SurgeX SX20 NE/RT operates automatically to protect connected equipment.

5.1 Adierazle argiak

Aurrealdeko panelak bi adierazle argi ditu:

• REMOTE (Yellow): This indicator illuminates when the unit is in remote control mode and is awaiting a signal for turn-on or turn-off.
• SELF-TEST (Green): This indicator illuminates when the unit has successfully completed its internal self-test and is operating normally. If this light is off, it may indicate a fault or power issue.

5.2 Autoproba funtzioa

The unit performs an automatic self-test upon power-up and continuously monitors its internal components. The green SELF-TEST indicator confirms proper operation. If this light is not illuminated, consult the troubleshooting section.

6. Mantentzea

The SurgeX SX20 NE/RT requires minimal maintenance. Periodically inspect the unit and its connections for any signs of wear, damage, or loose wiring. Ensure the enclosure remains free of dust and debris. Do not use liquid cleaners directly on the unit. No internal user-serviceable parts are present.

7. Arazoak

Ikusi beheko taula arazo ohikoenak eta haien irtenbide posibleak ikusteko.

8. Zehaztapenak

Detailed technical specifications for the SurgeX SX20 NE/RT.

9. Bermea eta Laguntza

For information regarding the product warranty, please refer to the warranty card included with your SurgeX SX20 NE/RT or visit the official SurgeX website. For technical support, service, or replacement parts, please contact SurgeX customer service directly. Ensure you have your model number and purchase date available when contacting support.

Fabrikatzailea: SurgeX
Webgunea: www.surgex.com (Adibampesteka, egiaztatu ofiziala mesedez webgunea)