Optex RC-20U 3 Channel Receiver Chimebox with Relay User Manual

1. Sarrera

The Optex RC-20U 3 Channel Receiver Chimebox with Relay is designed to enhance your Optex Wireless 2000 and 1000 systems by providing audible alerts for perimeter breaches. This receiver can differentiate between up to nine transmitters, categorizing them into three distinct groups, each with a unique chime tone. It also features a Form C relay for integration with other devices.

Ezaugarri nagusiak:

• Accepts up to 9 transmitters, identifying each group of 3 with a different chime tone.
• Operates with an included 9VDC adapter.
• Designed for versatile wall-mount or table-mount installation.
• Includes a Form C relay for activating external devices (50V AC 1A max. or 24V DC 1A max.).

2. Paketearen edukia

Mesedez, egiaztatu elementu guztiak daudela eta egoera onean daudela paketea irekitzean:

• Optex RC-20U Receiver Chimebox
• 9VDC korronte egokitzailea

Image: The Optex RC-20U Receiver Chimebox, a white rectangular unit with an antenna and speaker grille, shown alongside its white 9VDC power adapter.

3. Konfigurazioa

3.1 Unitatea piztea

1. Connect the small barrel connector of the 9VDC power adapter to the power input jack on the Optex RC-20U receiver.
2. Plug the 9VDC power adapter into a standard electrical outlet. The receiver will power on, indicated by an LED light (if present).

3.2 Hartzailea muntatzea

The RC-20U receiver can be placed on a flat surface or mounted on a wall.

• Table-Mount: Place the receiver on a stable, flat surface in a central location within range of your transmitters. Ensure it is not obstructed by large metal objects.
• Hormako muntaketa: Use appropriate screws (not included) to secure the receiver to a wall. Refer to the receiver's back panel for keyhole slots. Ensure the antenna is oriented for optimal signal reception.

3.3 Igorleak parekatzea

The RC-20U receiver can be paired with up to nine Optex wireless transmitters, organized into three groups of three, each triggering a unique chime tone. Refer to your specific Optex transmitter's manual for its pairing mode instructions.

1. Ensure the RC-20U receiver is powered on.
2. Locate the programming button or switch on the RC-20U receiver (consult the device for exact location, often a small button or dip switch).
3. Activate the pairing mode on the RC-20U receiver according to its specific instructions (e.g., press and hold a button until an indicator light flashes).
4. Within the pairing window, activate the desired transmitter (e.g., trigger its sensor). The receiver should acknowledge the pairing with a beep or flash.
5. Repeat for additional transmitters. The receiver will automatically assign transmitters to groups and their corresponding chime tones as they are paired.
6. Test each paired transmitter to confirm it triggers the correct chime tone on the receiver.

4. Funtzionamendu-argibideak

4.1 Chime Tones

When a paired transmitter detects activity, the RC-20U receiver will emit an audible chime. The receiver distinguishes between three groups of transmitters, each assigned a unique chime tone. This allows users to identify which area or zone has been triggered without needing to visually check the unit.

4.2 Relay Function

The RC-20U features a Form C relay output, which can be used to activate external devices such as lights, sirens, or other security systems. This relay activates when any paired transmitter triggers the receiver.

• Konexioa: Connect the relay output terminals on the RC-20U to the input terminals of the external device. Ensure correct polarity and voltage eskakizunak.
• Zehaztapenak: The relay supports a maximum of 50V AC at 1A or 24V DC at 1A. Do not exceed these ratings to prevent damage to the receiver or connected equipment.
• Konfigurazioa: Consult the RC-20U's specific wiring diagram and the external device's manual for detailed connection and configuration instructions.

5. Mantentzea

To ensure optimal performance and longevity of your Optex RC-20U receiver, follow these simple maintenance guidelines:

• Garbiketa: Wipe the receiver with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the casing.
• Ingurumena: Keep the receiver in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.
• Elikatze-iturria: Only use the provided 9VDC power adapter or a compatible replacement specified by Optex.
• Antena: Ensure the antenna is not bent or damaged, as this can affect wireless reception.

6. Arazoak

If you encounter issues with your RC-20U receiver, refer to the following table for common problems and solutions:

7. Zehaztapenak

8. Bermea eta Laguntza

For warranty information, technical support, or service inquiries regarding your Optex RC-20U receiver, please refer to the documentation provided with your purchase or visit the official Optex webgunea. Gorde erosketaren egiaztagiria bermearen erreklamazioetarako.