AKG CM311 AESH Head-Worn Condenser Microphone User Manual

Sarrera

The AKG CM311 AESH is a reference head-worn condenser microphone engineered for touring and live sound applications. It delivers clear, distortion-free audio performance, even in high-volume environments. Featuring Differoid technology, this microphone effectively cancels ambient noise from stage monitors, audience, and other sources, providing up to 12dB more gain before feedback compared to conventional cardioid microphones. This design ensures superior isolation, contributing to a cleaner overall sound mix. The CM311 AESH is specifically designed for compatibility with Shure wireless body-pack transmitters, utilizing a three-pin mini XLR connector.

Figure 1: AKG CM311 AESH Head-Worn Condenser Microphone. This image shows the microphone with its headband and boom arm, ready for use.

Konfigurazio Argibideak

1. Despaketatzea: Carefully remove the microphone and all accessories from its packaging. Inspect for any visible damage.
2. Buruko bandaren doikuntza:
   • Place the headband over your head, ensuring a comfortable and secure fit.
   • Adjust the headband size using the sliding mechanisms on each side until it rests firmly but without excessive pressure.
   • Position the microphone boom arm so that the microphone capsule is located approximately 0.5 to 1 inch (1.2 to 2.5 cm) from the corner of your mouth. The microphone should be positioned to the side of your mouth, not directly in front, to minimize plosives and breath noise.
   • Tighten any adjustment knobs on the boom arm to secure its position. Ensure the boom arm is stable and does not move during performance.
3. Connection to Transmitter:
   • The CM311 AESH features a three-pin mini XLR connector, designed for direct compatibility with Shure wireless body-pack transmitters.
   • Locate the input jack on your Shure body-pack transmitter.
   • Align the three-pin mini XLR connector with the input jack and push firmly until it clicks into place. Ensure a secure connection to prevent signal loss.
   • If using a wired connection with an appropriate adapter (not included), ensure the adapter provides phantom power as required by condenser microphones.
4. Piztea: Refer to your Shure wireless body-pack transmitter's manual for instructions on powering it on and pairing it with your receiver.

Funtzionamendu-argibideak

1. Mikrofonoaren kokapena:
   • For optimal sound quality and to utilize the Differoid noise-cancelling technology effectively, position the microphone capsule close to your mouth, ideally 0.5 to 1 inch (1.2 to 2.5 cm) from the corner of your lips.
   • Avoid positioning the microphone directly in front of your mouth to reduce plosive sounds (P, B, T sounds).
2. Irabaziaren doikuntza:
   • Adjust the gain on your wireless transmitter or mixing console. Start with a low gain setting and gradually increase it while speaking into the microphone at your normal performance volume.
   • Monitor the input level indicators on your transmitter or mixer to ensure the signal is strong but not clipping (distorting). The Differoid technology provides high gain before feedback, allowing for higher input levels without issues.
3. Soinu egiaztapena:
   • Perform a sound check in your performance environment. Speak and sing into the microphone as you would during a live performance.
   • Listen for clarity, tone, and any unwanted noise. Adjust EQ settings on your mixer as needed to achieve the desired sound.
   • The microphone's cardioid polar pattern and Differoid noise cancellation are designed to reject ambient noise, making it suitable for loud stages with floor monitors.

Mantentzea

• Garbiketa:
  • Regularly wipe the microphone's exterior and headband with a soft, dry cloth.
  • For stubborn grime, a slightly damp cloth with mild soap can be used, but ensure no moisture enters the microphone capsule or connector.
  • Clean the foam windscreen (pop filter) periodically. It can often be gently removed and hand-washed with mild soap and water, then allowed to air dry completely before reattaching.
• Biltegiratzea:
  • When not in use, store the microphone in its original case or a protective pouch to prevent dust accumulation and physical damage.
  • Saihestu mikrofonoa tenperatura altuetan edo hezetasun handiko lekuetan gordetzea.
• Manipulazioa:
  • Kontuz ibili mikrofonoarekin. Saihestu erortzea edo kolpe bortitzak jasatea.
  • Be gentle when adjusting the boom arm and headband to prevent stress on the plastic components.

Arazoak konpontzea

Zehaztapenak

Bermearen informazioa

AKG products are covered by a manufacturer's warranty against defects in materials and workmanship. The specific duration and terms of the warranty may vary by region and product. Please retain your proof of purchase for warranty claims. For detailed warranty information, please refer to the official AKG website or contact AKG customer support.

Oharra: Bezero batzuekviews mention potential issues with warranty support in certain regions if the product is not officially sold there. It is recommended to verify warranty coverage with your local distributor or AKG directly.

Bezeroarentzako Arreta

For technical assistance, troubleshooting, or service inquiries regarding your AKG CM311 AESH microphone, please contact AKG customer support. You can typically find contact information, including phone numbers and email addresses, on the official AKG Pro Audio webgunea (www.akg.com/pro).

When contacting support, please have your product model (CM311 AESH) and serial number (if applicable) ready to expedite the process.