Sarrera
Welcome to your APC Back-UPS Pro 1500VA 230V Power Saving Uninterruptible Power Supply. This manual provides essential information for the safe and efficient operation of your UPS, designed to protect your electronic equipment from power outages, surges, and fluctuations. Please read this manual thoroughly before installation and use.
Segurtasun-neurriak
- Deskarga elektrikoaren arriskua: UPS honek bolumen arriskutsuak ditutagEz saiatu unitatea desmuntatzen. Mantentze-lanak langile kualifikatuek bakarrik egin behar dituzte.
- Lurreratze egokia: Always connect the UPS to a grounded outlet. Do not remove the grounding prong from the power cord.
- Barruko erabilera soilik: This product is intended for indoor use only. Do not install the UPS in direct sunlight, near heat sources, or in areas with excessive moisture.
- Aireztapena: Ziurtatu aireztapen-fluxu egokia UPSaren inguruan. Ez blokeatu aireztapen-irekidurak.
- Bateriaren segurtasuna: Batteries can present a risk of electrical shock and high short-circuit current. Observe all precautions when replacing batteries. Use only APC-approved replacement batteries (RBC154).
- Gainkarga babesa: Do not overload the UPS. Ensure the total power draw of connected equipment does not exceed the UPS's capacity.
Paketearen edukia
Egiaztatu behean zerrendatutako elementu guztiak zure paketean sartuta daudela:
- APC Back-UPS Pro 1500VA 230V UPS Unit
- Erabiltzailearen eskuliburua (dokumentu hau)
- Elikatze kablea
- USB komunikazio kablea
Produktua amaituview
The APC Back-UPS Pro 1500VA 230V is a tower form factor UPS providing reliable battery backup and surge protection for your critical electronic equipment.
Aurrealdeko panelaren Ezaugarriak

Aurrealdea view of the APC Back-UPS Pro 1500VA unit, showing the LCD display and control buttons.
- LCD pantaila: Provides real-time status information including input/output voltage, load level, battery charge, and estimated runtime.
- Pizteko botoia: Turns the UPS unit on or off.
- Bistaratzeko botoia: Cycles through various display screens to show different operational parameters.
- Mute/Setup Button: Mutes audible alarms or enters setup mode for configuration.
- USB-A and USB-C Charging Ports: Gailu mugikorrak kargatzeko kokapen egokian.
Atzeko panelaren Ezaugarriak

Atzekoa view of the APC Back-UPS Pro 1500VA unit, showing the power outlets, data ports, and main power input.
- Bateriaren babeskopia eta tentsio-igoeren aurkako babes-entzungailuak: Eman energia bateriatik lanean ari zaren bitarteantages and protect against surges. Connect critical equipment here.
- Surge bakarrik saltokiak: Provide surge protection only. Connect non-critical equipment here.
- Energia-sarrera nagusia: UPSa hormako entxufearekin konektatzen du.
- Etengailua: UPSarentzako gainkarga-babesa eskaintzen du. Sakatu berrezartzeko etenaldia gertatuz gero.
- USB komunikazio portua: UPSa ordenagailu batera konektatzen du energia kudeatzeko softwarea erabiltzeko.
- Ethernet/Network Protection Ports: Protects network connections from surges.
Konfigurazioa
- Deskargatu eta ikuskatu: Carefully unpack the UPS and all accessories. Inspect for any shipping damage.
- Konektatu Barne Bateria: The UPS battery may be disconnected for shipping. Refer to the battery compartment access panel (usually at the bottom or rear) and connect the battery terminals as indicated.
- Kokatu UPSa: Place the UPS in a location with adequate ventilation, away from direct sunlight, excessive heat, or moisture. Ensure the front and rear vents are unobstructed.
- Konektatu Wall Outlet-era: Plug the UPS power cord directly into a grounded 230V wall outlet. Avoid using extension cords or surge protectors with the UPS input.
- Hasierako karga: Allow the UPS to charge for at least 24 hours before connecting any equipment to ensure maximum battery runtime. The battery indicator on the LCD will show charging status.
- Konektatu ekipoak:
- Konektatu ekipamendu kritikoa (adibidez, ordenagailua, monitore, bideratzailea) sarean. Bateriaren babeskopia eta tentsio-igoeren aurkako babesa saltokiak.
- Konektatu ekipamendu ez-kritikoa (adibidez, inprimagailua, eskanerra) sarean. Surge bakarrik saltokiak.
- Datu-lineak konektatu (aukerakoa): Connect your USB communication cable from the UPS to your computer to enable power management software features. Connect network cables to the Ethernet protection ports if desired.
Funtzionamendu-argibideak
Piztu/Itzaltzea
- Pizteko: Press and hold the Power button on the front panel until you hear a beep and the LCD display illuminates.
- Desaktibatzeko: Press and hold the Power button until the LCD display turns off.
LCD pantailako nabigazioa
- Press the Display button repeatedly to cycle through various information screens, including: Input Voltage, Irteerako Voltage, Load in Watts, Load in VA, Battery Charge Percentage, and Estimated Runtime.
Alarma kudeaketa
- Potentzia batean zehartage, the UPS will emit an audible alarm. Press the Mute/Setup button briefly to temporarily silence the alarm.
- To permanently disable or enable alarms, refer to the detailed instructions in the full user manual or power management software.
Mantentzea
Bateria ordezkatzea
- The typical battery life is 3-5 years, depending on usage and environmental conditions.
- When the battery needs replacement, the UPS will indicate this on the LCD display and may emit an alarm.
- Use only genuine APC replacement battery cartridges (RBC154) to ensure optimal performance and safety. Refer to the full user manual for detailed battery replacement instructions.
Garbiketa
- Regularly clean the exterior of the UPS with a dry cloth.
- Ensure ventilation openings are free from dust and debris to prevent overheating.
Biltegiratzea
- If storing the UPS for an extended period, ensure the battery is fully charged.
- Store the unit in a cool, dry location with adequate ventilation.
- Recharge the battery every 3-6 months to prevent permanent damage.
Arazoak konpontzea
Jarraian, arazo ohikoenak eta haien irtenbide posibleak daude:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| UPS ez da piztuko | Battery disconnected or low charge; UPS not plugged in. | Ensure battery is connected. Plug UPS into a live wall outlet and allow to charge. |
| Bateriaren iraupen laburra | Overloaded; battery old or not fully charged. | Reduce connected load. Allow battery to charge for 24 hours. Replace battery if old. |
| UPS emits continuous alarm | On battery mode; overload; battery fault. | Check power source. Reduce load. Check battery status on LCD. |
| Saltokietan ez dago botererik | UPS off; circuit breaker tripped; battery fault. | Turn UPS on. Reset circuit breaker. Check battery status. |
Zehaztapen Teknikoak
| Ezaugarri | Zehaztapena |
|---|---|
| Modelo zenbakia | BR1500GI |
| Produktuaren neurriak | 4.41 x 15.04 x 11.89 hazbete |
| Elementuaren pisua | 27.9 kilo |
| liburukiatage | 230 Volt |
| Pilak | 1 12V-ko bateria behar dira (barne) |
| Bateriaren zelulen konposizioa | Berun Azidoa |
| Kolorea | Beltza |
| Materiala | Metala |
| Forma-faktorea | Dorrea |
Bermea eta Laguntza
For detailed warranty information, product registration, and technical support, please visit the official APC by Schneider Electric webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. Gorde erosketa-agiria erosketaren frogagiri gisa, berme-erreklamazioetarako.
Baliabide gehigarriak eta harremanetarako informazioa aurki ditzakezu hemen: APC by Schneider Electric Store on Amazon.





