Thorens TD-235 Semi-automatic Turntable User Manual

1. Sarrera

This manual provides essential information for the proper setup, operation, and maintenance of your Thorens TD-235 Semi-automatic Turntable. Please read these instructions carefully before using your turntable to ensure optimal performance and longevity of the unit.

2. Segurtasun-argibideak

• Ez jarri unitatea euri edo hezetasunera.
• Ez ireki armairua. Mantendu konponketa guztiak langile kualifikatuen esku.
• Ensure the turntable is placed on a stable, level surface away from direct sunlight, heat sources, and excessive vibration.
• Deskonektatu korronte-kablea hormako entxufetik unitatea denbora luzez erabiliko ez bada.
• Handle the stylus with care to prevent damage and ensure proper playback.

3. Paketearen edukia

Egiaztatu behean zerrendatutako elementu guztiak ontzian daudela:

• Thorens TD-235 Turntable Unit
• Hauts Estalkia
• platter
• Gidatzeko Gerrikoa
• Feltro Mat
• Kontrapisua
• Patinajearen aurkako pisua
• Elikatze-moldagailua
• Audio Cable (RCA)
• AT-95E Cartridge (pre-installed or separate)
• Erabiltzailearen eskuliburua (dokumentu hau)

4. Konfigurazioa

4.1 Desontziratzea eta kokatzea

Carefully remove all components from the packaging. Place the turntable on a flat, stable surface. Ensure adequate ventilation around the unit.

4.2 Plater eta gerrikoaren instalazioa

1. Place the platter onto the center spindle.
2. Locate the drive belt. Carefully stretch the belt around the inner rim of the platter and then around the motor pulley. Ensure the belt is not twisted.
3. Jarri feltrozko esterilla plateraren gainean.

Irudia: Goitik behera view of the Thorens TD-235 turntable with the dust cover closed, illustrating the assembled unit.

Irudia: Barnekoa view of the Thorens TD-235 turntable with the platter removed, showing the motor and belt drive system for installation reference.

4.3 Cartridge and Tonearm Setup

The TD-235 typically comes with an AT-95E cartridge pre-installed. If not, carefully mount the cartridge to the headshell following the cartridge manufacturer's instructions.

1. Kontrapisuaren doikuntza: Slide the counterweight onto the rear of the tonearm. Adjust it until the tonearm is balanced and floats horizontally. Lock the counterweight in place.
2. Tracking Force Setting: Refer to the cartridge specifications (e.g., 2.0 grams for AT-95E). Rotate the numbered ring on the counterweight to the desired tracking force without moving the counterweight itself.
3. Anti-skating Adjustment: Attach the anti-skating weight to the small fishing line and loop it over the anti-skating rod. Set the anti-skating force to match the tracking force.

Irudia: Xehetasun handikoa view of the tonearm assembly, highlighting the cartridge, counterweight, and anti-skating system for precise adjustment.

4.4 Hauts-estalkiaren instalazioa

Insert the hinges of the dust cover into the receptacles at the rear of the turntable plinth.

4.5 Audio eta energia konexioak

1. Connect the integrated RCA audio cables from the turntable to the PHONO input of your amplifier or receiver. Ensure the ground wire is connected to the ground terminal on your ampbiziagoa.
2. Connect the power adapter to the DC input on the turntable and then plug it into a wall outlet.

5. Funtzionamendu-argibideak

5.1 Piztu/Itzaltzea

The turntable powers on automatically when the tonearm is moved over the platter and powers off when the tonearm returns to its rest or after the record finishes playing.

5.2 Abiadura hautatzea

Use the speed selector switch, typically located on the front left of the plinth, to choose between 33 1/3 RPM for LPs and 45 RPM for singles. Ensure the correct speed is selected for the record you are playing.

5.3 Disko bat jotzen

1. Jarri disko bat plateraren gaineko feltrozko alfonbra gainean.
2. Askatu besoa bere euskarritik.
3. Astiro-astiro altxa besoa seinaleztapen palanka erabiliz.
4. Move the tonearm over the desired starting groove of the record. The platter should begin to spin automatically.
5. Lower the cueing lever slowly to allow the stylus to descend onto the record.

Image: The Thorens TD-235 turntable with its dust cover open, ready for operation, displaying the main components.

5.4 Erreprodukzioa gelditzea

When the record reaches the end of the last track, the tonearm will automatically lift and return to its rest, and the platter will stop spinning. To stop playback manually:

1. Altxa besoa seinaleztapen palanka erabiliz.
2. Gently guide the tonearm back to its rest.
3. Lower the cueing lever.
4. Lock the tonearm in its rest position. The platter should stop spinning shortly after.

6. Mantentzea

6.1 Estiletoa garbitzea

Regularly clean the stylus using a soft brush designed for stylus cleaning, brushing gently from back to front. A dirty stylus can degrade sound quality and damage records.

6.2 Garbiketa Erregistroak

Keep your records clean to prevent dust and debris from accumulating on the stylus. Use a carbon fiber brush or a record cleaning solution and cloth before each play.

6.3 Biragailuaren garbiketa

Wipe the plinth and dust cover with a soft, dry, lint-free cloth. For stubborn marks, a slightly damp cloth can be used, followed by a dry cloth. Avoid harsh chemicals or abrasive cleaners.

6.4 Drive Belt Replacement

The drive belt may stretch or degrade over time, affecting speed stability. Replace the belt if you notice inconsistent speed or if it appears worn. Refer to section 4.2 for installation.

7. Arazoak

8. Zehaztapenak

• Eredua: Thorens TD-235
• Mota: Semi-automatic Turntable
• Motor mota: DC Motorra
• Abiadurak: 33 1/3, 45 RPM
• Kartutxoa: AT-95E (included)
• Seinalearen formatua: Analogikoa
• Seinaleztapen-zarata ratioa: 72 dB
• Energia iturria: Kable elektrikoa
• Produktuaren neurriak: 16.14 x 13.39 x 5.12 hazbete (410 x 340 x 130 mm)
• Elementuaren pisua: 14.77 libra (6.7 kg)
• Fabrikatzailea: Thorens

9. Bermea eta Laguntza

Thorens products are covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Thorens website for detailed warranty terms and conditions. For technical support or service inquiries, please contact your authorized Thorens dealer or the Thorens customer service department.

For further assistance, you may visit the official Thorens webgunea: www.thorens.com