1. Sarrera
This manual provides essential information for the safe and efficient operation of your Steinbach SPS 75-1 Filter Pump. This self-priming pump is designed for use with pool filter systems, capable of handling pools up to 33,000 liters. It features a robust 230 V/450 W motor and a pump capacity of 8,520 liters per hour (142 l/min).
Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage to the unit or injury.
2. Segurtasun-argibideak
Beti jarraitu segurtasun neurri hauek sute, deskarga elektriko edo lesio arriskua murrizteko.
- Segurtasun elektrikoa: Ensure the pump is connected to a properly grounded outlet. Do not operate the pump with a damaged power cord or plug. Disconnect power before performing any maintenance or service.
- Uraren tenperatura: The pump is designed for a maximum water temperature of 35°C (95°F). Operating above this temperature can cause damage to the pump.
- Lekua: Install the pump on a stable, level surface, away from direct sunlight and excessive moisture. Ensure adequate ventilation around the motor.
- Haurrak eta maskotak: Mantendu haurrak eta maskotak ponpatik urrun funtzionatzen ari den bitartean.
- Mantentzea: Only perform maintenance as described in this manual. For complex repairs, consult a qualified technician.
3. Konfigurazioa
Follow these steps for proper installation of your filter pump.
- Despaketatzea: Carefully remove all components from the packaging. Inspect the pump for any signs of damage during transit.
- Lekua: Position the pump as close to the pool as possible, ensuring it is below the water level for optimal self-priming. The pump should be on a firm, level surface to prevent vibration.
- Hodi-konexioak: Connect the pool hoses to the pump's inlet and outlet ports. The pump supports hose diameters of 32mm and 38mm. Ensure all connections are tight to prevent leaks and maintain prime.
3.1. irudia: hurbileko planoa view of the pre-filter inlet with a hose connection, showing the clear cover and filter basket.
Figure 3.2: The pre-filter inlet without a hose attached, illustrating the threaded connection for secure fitting.
Figure 3.3: The pump's outlet connection with a hose securely fastened, ready for water discharge.
Figure 3.4: The pump's outlet port, showing the internal threading for hose attachment.
Figure 3.5: An overall perspective of the Steinbach SPS 75-1 Filter Pump, highlighting its compact design and key components.
- Ponpa inprimatzea: As a self-priming pump, it will draw water once connected. However, for initial startup, it is recommended to fill the pre-filter housing with water to assist in faster priming.
- Konexio elektrikoa: Plug the pump into a suitable 230V electrical outlet. Ensure the circuit is protected by a Residual Current Device (RCD) for safety.
4. Funtzionamendu-argibideak
Once installed, operating the pump is straightforward.
- Ponpa martxan jartzea: Turn on the power supply to the pump. The pump will begin to draw water and circulate it through your filter system.
- Jarraipena: Observe the pump during its initial operation to ensure there are no leaks and that water is flowing correctly. The pump operates at approximately 70 dB.
- Ponpa gelditzea: Itzali ponparen hornidura.
- Iraupena: The optimal run time for your pump depends on your pool size and usage. For a 33,000-liter pool, ensure sufficient daily filtration to maintain water clarity.
5. Mantentzea
Regular maintenance ensures the longevity and efficiency of your pump.
- Iragazki aurreko garbiketa: The pump is equipped with a pre-filter to catch larger debris. Regularly inspect and clean the pre-filter basket. To do this, turn off the pump, disconnect power, unscrew the clear lid, remove the basket, clean it, and reassemble. Ensure the O-ring is properly seated for a watertight seal.
- Neguan egitea: Before freezing temperatures, drain all water from the pump and hoses. Store the pump in a dry, frost-free location.
- Garbiketa orokorra: Keep the exterior of the pump clean and free from dirt and debris. Do not use harsh chemicals.
6. Arazoak
If you encounter issues with your pump, refer to the following common problems and solutions.
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Ponpa ez da martxan jartzen | Ez dago elikadura hornidurarik Motor gainkarga Bultzada trabatuta | Egiaztatu konexio elektrikoa eta zirkuitu-hauslea Allow motor to cool, check for obstructions Inspect and clear impeller |
| Ur emaria baxua | Aurre-iragazkia beteta Aire-ihesak xurgatze-linean Ur maila baxua igerilekuan | Clean pre-filter basket Egiaztatu konexio guztiak estututa dauden Add water to pool |
| Ponpa zaratatsua da | Airea sisteman Dardara Errodamendu higatuak | Bleed air from system, check for leaks Ensure pump is on a stable surface Jarri harremanetan teknikari kualifikatuarekin |
| Ponpak prima galtzen du | Aire-ihesak xurgatze-linean Ur maila baxua Aurre-iragazkia beteta | Check all connections and O-rings Ensure adequate water level Clean pre-filter basket |
Irtenbide hauek saiatu ondoren arazoa konpontzen ez bada, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin edo zerbitzu-teknikari kualifikatu batekin.
7. Zehaztapenak
Technical data for the Steinbach SPS 75-1 Filter Pump.
Figure 7.1: Product label detailing the pump's electrical and performance specifications.
Figure 7.2: Dimensional drawing of the pump, indicating height, width, and length.
| Parametroa | Balioa |
|---|---|
| Modelo zenbakia | 040920 |
| liburukiatage | 230 V |
| Boterea | 450 W |
| Ponpen Edukiera | 8,520 l/h (142 l/min) |
| Max. Pump Height | 9 m |
| Konexioaren Diametroa | 32/38 mm |
| Uraren gehienezko tenperatura | 35°C |
| Maximum Pool Size | 33,000 litro |
| Zarata Maila | Gutxi gorabehera. 70 dB |
| Produktuaren neurriak (L x W x H) | 45 x 20.5 x 25 cm |
| Elementuaren pisua | 6 kg |
| Materiala | Plastikoa |
| Energia iturria | Kable elektrikoa |
8. Bermea eta Laguntza
Specific warranty details for this product are not provided in this manual. Please refer to your purchase documentation or the manufacturer's official webbermearen informazioa lortzeko gunea.
For technical support, spare parts, or service inquiries, please contact Steinbach customer service through their official channels. Always provide your product model number (040920) and purchase date when seeking support.
